Download Free 3D Model Torque Meter 3D Print Model
Summary
This a torque meter for indoor free flight models. It’s design is based largely on the Flite-Tork meter that was originally developed by Bill Gowen. This design is a work in progress, and I still need to upload the collar that mounts the 1/32″ wire hook to the 1/8″ shaft. I hope to have this uploaded in a day or two.
To build the meter you need 1 of each printed part, as well as the following components:
8 – M3 x 8 button or socket head screws (attaching screen mount and top)
2 – M2 x 25 (attaching load cell)
2 – 1/8″ stop collars
1 – 6-32 x 1/4″ set screw
1 – 6-32 x 1″ pan, truss, or button head screw
1 – 6-32 nut
1 – #5 or #6 washer
2 – R2 open bearing (eBay)
1 – 2xAAA battery holder with leads (eBay)
1 – TBBSC 200g scale (Amazon)
1 – ~3″ long piece of 1/8″ music wire
1 – 1/32″ music wire for hook
I would also recommend cutting the wires between the PCB and the load cell to add a connector. There isn’t enough room in the design to pass the load cell though the front wall. The other option is de-soldering the wires from the board, and re-soldering after the wires are passed through. More details to follow after I upload the last part in a day or two.
Print Settings
Printer:
Tevo Tarantula Rafts:
No Supports:
No Resolution:
0.2mm Infill:
25%
Categories: 3D Print Models, All 3D Models, Free 3D Models
Sorry, comments are closed for this item.