dynamometer for vehicles and industry
Tag: Torque
-
Kyocera Torque G02 Black 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
Kyocera Torque G02 Green 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
Kyocera Torque G02 Red 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
Cross Wheel Spanner 3D Model
cross wheel spanner tire iron spare change flat hex bolt torque car tool manual accessories realistic automobile lug nut wrench
-
Torque Meter 3D Print Model
Summary
This a torque meter for indoor free flight models. It’s design is based largely on the Flite-Tork meter that was originally developed by Bill Gowen. This design is a work in progress, and I still need to upload the collar that mounts the 1/32″ wire hook to the 1/8″ shaft. I hope to have this uploaded in a day or two.
To build the meter you need 1 of each printed part, as well as the following components:
8 – M3 x 8 button or socket head screws (attaching screen mount and top)
2 – M2 x 25 (attaching load cell)
2 – 1/8″ stop collars
1 – 6-32 x 1/4″ set screw
1 – 6-32 x 1″ pan, truss, or button head screw
1 – 6-32 nut
1 – #5 or #6 washer
2 – R2 open bearing (eBay)
1 – 2xAAA battery holder with leads (eBay)
1 – TBBSC 200g scale (Amazon)
1 – ~3″ long piece of 1/8″ music wire
1 – 1/32″ music wire for hook
I would also recommend cutting the wires between the PCB and the load cell to add a connector. There isn’t enough room in the design to pass the load cell though the front wall. The other option is de-soldering the wires from the board, and re-soldering after the wires are passed through. More details to follow after I upload the last part in a day or two.
Print Settings
Printer:
Tevo Tarantula Rafts:
No Supports:
No Resolution:
0.2mm Infill:
25%
