Download Free 3D Model Toothed Clip/Clamp 3D Print Model

Summary
I made this clip to hold coiled exercise bands so that they wouldn’t flop around. However, it can be used for anything that would benefit from being compressed together like extension cords, audio cables, etc. One could modify it to have a bigger arm radius or be longer/short depending on your needs. I’d also considered putting a loop on one side so that it could be hung on a wall or work station.
Demo: https://youtu.be/4lMVi9G0CzM
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2 MMU Rafts:
Doesn’t Matter Supports:
Yes Resolution:
.15mm Infill:
25% Notes:
I printed both pieces on their sides. Supports were used under the teeth and the arm on Body A. The printer manages fine bridging across the ‘roof’ of the female piece fine, so no supports are needed inside that hole.
Post-Printing
Depending on the your printers accuracy, you may need to take an X-Acto knife to the male end so that it can slide easily in and out of the receiving piece.