Download Free 3D Model Linear Servo HiTEC HS-645MG 3D Print Model

Summary
A linear servo for HiTEC HS-645MG Ultra Torque metal gear servos capable of lifting ten pounds, with a 50mm reach. After searching thingiverse for a robust, 3D printable linear servo, I found several with very fine teeth which would not provide enough holding force and would require tight tolerances. Furthermore, the 3D-printed gears had nothing to prevent slipping on the servo axle. I designed my own last night using a HiTEC MG servo and created a gear with holes aligned to the HiTEC servo horns. It can work with any HiTEC servo of this size. The metal gears just make it stronger for robotics and less likely to wear out.
Print Settings
Printer Brand:
FlashForge Printer:
Creator Pro Rafts:
No Supports:
No Resolution:
.2mm Infill:
20% Notes:
Makerbot TrueBlack ABS at 230 degrees C, with Kapton tape over table at 110 degrees C