Summary
use with mini servo
Tag: Servo
-
Servo Mount for Foam Wing 3D Print Model
Summary
A servo mount that installs in a 6mm thick sheet foam wing. For standard size servos (40 x 20 mm).
Print Settings
Printer:
Creality CR-10
Rafts:
No
Supports:
No
Resolution:
.2 mm
Infill:
100% -
S800 Sky Shadow improved servo horn 3D Print Model
Summary
Just a small little servo horn with around the same distances than the original that comes with the kit. The problem with the original one was that the horn has to be placed directly through the carbon rod in the control surface. My version should fix that and has a spare space for the carbon rod to go between the servo horn fixture.
At the moment untested, I will update if I have the time to build my S800 😉
Print Settings
Printer:
Tevo Tarantula Rafts:
Doesn’t Matter Supports:
No Resolution:
0.1 Infill:
100% Notes:
Just print it with 100% infill and with high resolution for better results
Post-Printing
I did draw it without tolerances, so you maybe have to widen the holes of the two plates.
And also drill the holes that you need for the linkage 😉 -
Uniaxial carrier module 3D Model
Uniaxial carrier module, the module through the belt drive guide rail transportation, controlled by servo motor can ensure the position precision and accuracy in 0.01 mm, low cost, large load, this is a typical transmission belt structure model is transformed into step or iges universal model download, please reference!Also includes 3d original files, welcome to download!If you like,you can paypal for you to get this models or if you have any questions also you can email to me.
-
Gantry manipulator 3D Model
Gantry manipulator, the model is driven by a three-axis synchronous belt, and the large span X-axis is synchronized with the synchronous axis, and the Y-axis and z-axis are driven by common synchronous belt.The overall mechanism is cheap, eliminating the screw and servo motor structure, greatly reducing the cost, and the speed is also greatly improved.This model is transformed into step and iges general model download, please refer to!Also includes 3d original files, welcome to download!if you like,you can paypal for you to get this models or if you have any questions also you can email to me.
-
Modified servo mounts and motormount 3D Print Model
Summary
These are STL files that Wersy made for my Red duck.
I wanted to use bigger servos and a stronger motor. Used HK 151538 hobby king servos.https://hobbyking.com/en_us/hobbykingtm-hk15138-standard-analog-servo-4-3kg-0-17sec-38g.html It needs to have both the mount and the slot
Also used a heavier motor. So a new shorter nose was used. I felt that the plane needed better take off performance. -
remix of MrCrankyface by Flyon20s axles middle axles with servo mounts 3D Print Model
Summary
I wanted to build an 8×8 Hemmt. I am new to 3d design so I didn’t want to get into designing gears so I found the mid axles and adapted them for leaf springs and made them longer because my vehicle is wide. I did not have room to put my servos on the frame so I added a mounting plate on the tops. they need tweaking because my turning radius is horrible. I was going to wait till got it working perfect. I will be posting the Hemmt frame and body soon.
Print Settings
Printer:
anet A8 Rafts:
No Supports:
No Resolution:
.02 Infill:
20% Notes:
I printed the half shafts at 100% just for extra strength might not be needed. -
Feiyue FY-03 1/10 mg995 servo mount 3D Print Model
Summary
This is a vertical adapter for the Feiyue FY-03 to fit a TowerPro mg995
You need to mark out and drill/melt 3 new holes in the base of the car to fit this new mount for your steering servo. (I have no phone at the moment, pics will be added soon.)
Freecad included -
Servo Horn Compatible with Futaba 3F or Hitec H25T 3D Print Model
Summary
My hobby projects often find me needing a servo horn that I don’t have. I wanted to model a horn with the correct splines to fit the standard size servos that I typically use. This Thing includes the model for a round servo horn with splines that are compatible with either Futaba 3F or Hitec H25T spline servos (this covers most newer standard size servos).
The horn is a tight fit and you may need to slightly scale the model to account for your printer’s particularities.
The DesignSpark Mechanical source model is provided. This allows you to make a custom servo horn.
Print Settings
Printer:
Malyan M150 Rafts:
No Supports:
No Resolution:
0.2 Infill:
25% Notes:
Material: PLA
Slicer: Kisslicer v1.5 -
The Scorpio: Dual Blower Fanduct + SG90 Servo for Tevo Tarantula 3D Print Model
Summary
This is a remix marrying two beautiful and functional designs into one: https://www.thingiverse.com/thing:1850163 (Dual Blower fan duct) and this wonderful servo bracket https://www.thingiverse.com/thing:930292.
Printing is difficult, and the design might change in future to try and make it easier to print. Best is to use custom supports, and if you have good adhesion print it upside down. If you don’t have custom supports, print it lying on the ‘box’ and with supports from build plate. You will likely have a lot of cleaning up to do, as there is a lot of bridging.
main body can be printed at 0.2, medium infil. The arm and gear should be printed at around 0.1, no brim, solid. -
Linear Servo HiTEC HS-645MG 3D Print Model
Summary
A linear servo for HiTEC HS-645MG Ultra Torque metal gear servos capable of lifting ten pounds, with a 50mm reach. After searching thingiverse for a robust, 3D printable linear servo, I found several with very fine teeth which would not provide enough holding force and would require tight tolerances. Furthermore, the 3D-printed gears had nothing to prevent slipping on the servo axle. I designed my own last night using a HiTEC MG servo and created a gear with holes aligned to the HiTEC servo horns. It can work with any HiTEC servo of this size. The metal gears just make it stronger for robotics and less likely to wear out.
Print Settings
Printer Brand:
FlashForge Printer:
Creator Pro Rafts:
No Supports:
No Resolution:
.2mm Infill:
20% Notes:
Makerbot TrueBlack ABS at 230 degrees C, with Kapton tape over table at 110 degrees C -
Anki Servo Car Top 3D Print Model
Summary
This model was used to mount an FPV pan/tilt camera.
Print Settings
Printer Brand:
LulzBot Printer:
TAZ 6 Rafts:
No Supports:
Yes Infill:
100% Notes:
Best print was with ABS for strength, but PLA did well also.
