Download Free 3D Model Filament dispenser box 3D Print Model

Summary
Introduction
There are many filament spool holders available, with numerous geometries and types. However, all I tried so far worked with loose spools that I had to juggle around when switching filament. I wanted a simple system which serves as filament storage and allows easy access to the filament for use.
The idea as such is not new, there are similar designs available. This solution uses regular containers available at your local hardware store and a cheap plastic pipe. Additionally some pneumatic quick connectors, Teflon tube, M4 screws and zip ties are used.
My 3D printer is placed in an Ikea box with the filament dispensers on top. A feedthrough with an additional Teflon tube brings the filament inside. So far it’s been working great.
Required parts
Storage box (mine are approximately 370x270x270 mm)
Tube or similar (up to 25 mm diameter)
Pneumatic quick connectors + M5 nuts
Teflon tube
M4x20 screws + nuts
Zip ties (optional, to keep the spools in place)
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
No Supports:
No Resolution:
0.2 mm Infill:
20% Notes:
Printed in PETG, but PLA should also works just fine.
NOTE: The files must be rotated properly, NOT printed as shown.