Download Free 3D Model Fader knob 3D Print Model

Summary
Had broken a couple of faders on my Phonic Summit mixer so I modeled this from the existing faders. I’m pretty sure this will fit other mixers as well with minor adjustments.
The center groove is meant to be painted white in oreder to easily align the fader to the underlying scale.
Print Settings
Printer Brand:
Prusa Printer:
Prusa Clone Rafts:
No Supports:
Yes Resolution:
0.15 mm Infill:
20% Notes:
There’s a lot of thin walls here so make sure that your slicer allows some overlap. Supports are necessary to fill the short distance btween the fader foot and the upper body. I use dense support in S3D slicer for best results.
Use ABS to allow for a little flexing. PLA is a bit too hard and will probably make the fitting difficult.