Download Free 3D Model CS1/CSR/160R Deuce Trigger 3D Print Model
Summary
Tools:
Drill
Helicoil Installation Toolhttps://www.amazon.com/ZFE-Helicoil-Thread-Repair-Insertion/dp/B00RFKHHRW
Helicoil
Stainless Steel Helical Insert, M2.5 x 0.45 Thread, 2.5 mm Long
91732A764
Instructions:
Print the file using 1mm supports

Remove supports from the back of the trigger andthrough all the holes.

Print using the proper settings for your printer and material.
Finishing may be accomplished by sanding, Acetone Vapor Bath, or whatever method is required for the material being used.
Use the drill from the helicoil installation kit to drill out all 3 holes in the trigger.
Use the tap from the kit to tap the center hole.

Install the helicoil per the kit instructions.
Install the trigger on your CS1/160R. Enjoy!
Print Settings
Printer Brand:
MakerGear Printer:
MakerGear M2 Rafts:
No Supports:
Yes Resolution:
.1 Infill:
60%
Categories: 3D Print Models, All 3D Models, Free 3D Models
Sorry, comments are closed for this item.