3DHunt.co

Tag: CS1/CSR/160R

  • CS1/CSR/160R Deuce Trigger 3D Print Model

    CS1/CSR/160R Deuce Trigger 3D Print Model

    Summary
    Tools:
    Drill
    Helicoil Installation Toolhttps://www.amazon.com/ZFE-Helicoil-Thread-Repair-Insertion/dp/B00RFKHHRW
    Helicoil
    Stainless Steel Helical Insert, M2.5 x 0.45 Thread, 2.5 mm Long
    91732A764
    Instructions:
    Print the file using 1mm supports
    
    Remove supports from the back of the trigger andthrough all the holes.
    
    Print using the proper settings for your printer and material.
    Finishing may be accomplished by sanding, Acetone Vapor Bath, or whatever method is required for the material being used.
    Use the drill from the helicoil installation kit to drill out all 3 holes in the trigger.
    Use the tap from the kit to tap the center hole.
    
    Install the helicoil per the kit instructions.
    Install the trigger on your CS1/160R. Enjoy!
    Print Settings
    Printer Brand:
    MakerGear Printer:
    MakerGear M2 Rafts:
    No Supports:
    Yes Resolution:
    .1 Infill:
    60%