Download Free 3D Model Bugs 3 drone Walkera gimbal mod 3D Print Model

Summary
This simple but effective mod allows you to fit a Walkera G2D gimbal to the stock camera mount fitting beneath the battery.
Allows for quick and easy fitting and removal of the gimbal.
I used this clip to secure my Akaso EK700 camera …. https://www.thingiverse.com/thing:1795933
And this is the landing gear I use ….. https://www.amazon.co.uk/gp/product/B06VV21JYF/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
I had to drill the screw holes a bit wider in this landing gear as they didn’t quite line up with the Bugs 3.
First test with the gimbal fitted ….. https://www.youtube.com/watch?v=FKtRV4nx8h4&feature=youtu.be
Gimbal mount adapter :
Fix the adapter to the gimbal mounting plate with 2 screws and nuts (see pictures above).
Gimbal power :
I used the balance port from the stock battery to power the gimbal.
Remove the female connector and middle wire from a 2s lipo balance expansion cable and splice it to the cable with the 2 pin female connector that comes with the gimbal.