Parfum LA PRAIRIE Skin Caviar Collection 3d Models
Category: Free 3D Models
Free 3D models ready to be used in your CG projects such as films, visualizations, games, VR etc. All 3D Models and Free 3D Print Models are available for download in several formats including .MAX, .STL, .FBX, .3DS, .C4D, .OBJ, .BLEND, .DWG, .DXF, .LWO and much more. If you’re in search of high-quality Free 3D assets, we have a huge library of 3d models for all your needs. Also you can visit 3D Models and 3D Print Models category.
-
V-Slot to Arca swiss tripod mount 3D Print Model
Summary
Ooznest / ustepper time lapse rail tripod mounting plate for home made ooznest time lapse rail.
http://www.instructables.com/id/Ooznest-Ustepper-Motion-Time-Lapse-Video-Rail/
Print Settings
Printer Brand:
Prusa Printer:
Prusa Clone Rafts:
No Supports:
No Infill:
50% -
Toothbrush Wall Holder (Adhesive) 3D Print Model
Summary
I love the design so much I wanted to recreate it myself. This one is not so different from the original, but its grip is a little bigger and its got a flat bottom for an adhesive mount.
Also, I’ve included the nurbs source if you want to play around. -
Mars Gaming MCP0 mouse replacement scrolling wheel 3D Print Model
Summary
Today the scrolling wheel of my mouse broken. However I tried to glue the two parts together the tiny piece broken broken off every time. So I decided to design and print a replacement part for the mouse and it seems to work very well.
Print Settings
Printer:
Anet A8 Rafts:
No Supports:
Yes Resolution:
0.12 Infill:
50% -
Pi-Pilot 3D Print Model
Summary
When you need mythological salvation, look for a “sky pilot.”
When you need salvation from a slightly-too-small inside diameter, look for a pi-pilot! (Pipe-pilot. Get it? Anyone?)
This is a guide to keep a spade bit from wandering and chattering while reaming a PVC pipe or fitting (or other soft material with an existing hole) to a larger size.
The included STL files may or may not work for you without adjustment. Your best bet would be to edit the .scad file and generate your own. If you need to fit something other than a 7/8-inch bit, you have no choice at the moment.
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
Doesn’t Matter Supports:
No Notes:
You would be well-advised to take exact measurements of the spade bit you intend to use, as they vary in dimensions between manufacturers.
I was able to print this without supports so required cleanup was minimal. I did have to do some sanding due to poor printer calibration.
I included a “slop factor” of 1.25 since my Prusa i3 is long overdue for recalibration. If your printer is spot-on, you might be able to set the slop_factor value to 1.
Post-Printing
Assembly is straightforward: Insert the bit into the guide body; snap the pilot section over the top, and start reaming!
When using this I found that a brand-new spade bit still tends to “grab” a bit, so be prepared for it. You might even try running the drill in reverse, although I have not. Drilling generates heat, and the PVC pipe will tend to soften. Lubricating with water while in use may be helpful though messy. The “results” photo is with an earlier iteration, but the principal is the same. -
Youtube Button cnc router/laser 3D Print Model
Summary
I used 15mm plywood. This buttonn is 12cm x 9cm.
Enjoy it!
How I Designed This
Design made by sketchup make 2016 and sketUcam for gcode. All files included, -
Flags Free 3D Model
flagpole flag country region nation Politics Labor Union Unity usa Global Communications stick Symbol Independence European Europe
-
Lotus Cortina 3d model
Realistic 3d model of Lotus Cortina, detailed 2 door saloon, high-performance classic sports car.
-
Stander buddy Chair Free 3D Model
High quality model. Ideal for close up.The model is highly accurate and based on the manufacturers original dimensions and technical data.Excellent for interior renderings.poly count based on 3d max file onlymental ray Autodesk materials used so its textured but with Autodesk only you can convert it to vray or corona by convert scene tool .
-
Z Rod Anti Wobble v2 3D Print Model
Summary
this is just an upgrade version z rod anti wobble as requested by FxDx i hope you like it.
old version support z stop https://www.thingiverse.com/thing:2480900
Print Settings
Printer:
Anet A8 Rafts:
No Supports:
No Resolution:
0.2 -
Kenner Stormy Blaster 3D Print Model
Summary
This is my designed version of the Stormy Kenner Blaster, I have included the 3d. cad file if you wish to tweak….and the STL file..
You can print full size or use as a replacement maybe for a missing blaster for your figures.. -
Yoplait oui jar greenhouse 3D Print Model
Summary
Makes a greenhouse with the glass Jar from a Yoplait oui -
Prefect case for Anet A8 Remix 3D Print Model
Summary
So, I really liked this case but it did not fit my setup because i have the “Hulk” Frame Brace for the Anet A8. This original case had a little overhang that rested on top of the left back support. So i modified this case to remove the “lip” so it would fit my setup. I also added a name tag bar just above the mofset’s mount, labeled: bed , and hotend. -
Crystal Nightlight 3D Print Model
Summary
Keep things that go BUMP in the night at bay with a glowing crystal nightlight!
See it in action: https://youtu.be/R-lqVgWjFFc
More information, full parts list, and DIY instructions: www.dragonmountaindesign.com
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
No Supports:
Yes Infill:
20% Notes:
Support only needed for CN-TriggerBottom! Brim setting may be required for CN-TriggerTop and CN-TriggerBottom. -
Modern Simple Futuristic Desk Free 3D Model
A fully Modeled Modern Futuristic Ready to be placed in a scene and to be Rendered
-
Luster 3D Model
Additional Info: Luster S110188 6 red – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
Repaired back left base 3D Print Model
Summary
ran it threw netfab and 3dbuilder than it sliced, figured I would save someone the trouble -
Tool Holder 3D Print Model
Summary
Some basic tool holders designed to be hot glued to any wall. Meant to hold Anet A6 screw drivers, Cutters, wrench, normal pliers, vernier calliper, set of 6 Allen keys, hammer, super glue, xacto knife.
Tool holder 2 is the shorter one which holds a hammer. -
Steel rule attachment for my tool holder 3D Print Model
Summary
Basically just super glue this to the side of the tool holder and place the steel rule through it. -
Z-Axis Stabiliser for Anet A8 3D Print Model
Summary
A useful tool to stabilize the z-Axis.
An alternative to the already existing things.
Post-Printing -
Handy Bottle Opener 3D Print Model
Summary
The Handy Bottle Opener is inspired by the Osprey hand.
We HOPE that you are inspired to give others a hand. Our aim is to raise awareness about organizations that are seeking to connect with and prove support to all that need a prosthesis. Please spread the word, we are hoping to connect with and support all in need.
Hands On Prosthetic Engineering, HOPE, is a student organization dedicated to providing free prosthetic hands to all children through 3D creation. We are an all-volunteer organization with a 501c Non-profit that provides funding for both our free services and the research and development to further it. Our Non-profit provide students the opportunity to serve the smallest parts of their world with the biggest reach possible. 100% of tips will be donated to HOPE, and may be claimed. Visit www.hopeuofsc.org for more information or to contribute. Follow us on:
www.facebook.com/hopeuofsc/[email protected]/
www.instagram.com/hopeuofsc/
The e-NABLE community is an amazing group of individuals from all over the world who are using their 3D printers to create free 3D printed hands and arms for those in need of an upper limb assistive device. Please take a moment to visit www.enablingthefuture.org for more information or to contribute.
Thank you to Alderhand and e-Nable.
You can also reach us at:
Hands On Prosthetic Engineering HOPE
1225 Laurel Street
Suite # 418
Columbia, SC 29201
Officer Phone: (803)-228-9088
Office Email:[email protected]
Print Settings
Printer Brand:
LulzBot Printer:
Mini Notes:
This print works best around 100%, but slightly larger or small will work too. The overall length should be about 168mm. The support is built-in. I believe that most Infill amounts will work, but I have only used 20%.
Post-Printing
Remove support
Remove built-in support by snapping the support columns in the bottle cap opening. -
Blue sun surface Free 3D Model
Here is my try of a blue sun surface with micro displacement. If you change the values of the voronoi and the noise tectures then you can made an animation.
-
The ages of love Free 3D Model
The ages of love (A426), relief in marble, after the original model from 1824. Thorvaldsen Museum (Copenhagen, Denmark). Made with ReMake and ReCap from Autodesk.
-
Glow – Animated Textures – Eevee Blender 2.8 Free 3D Model
NEEDS BLENDER 2.8/EEVEE TO VIEW! WILL NOT WORK ANY VERSION BELOW!
-
Star Wars: XQ6 Platform Free 3D Model
Medium detailed model of an XQ6 Platform. Everything is parented to empty (XQ6 Platform). The model is totally free to use, but the Star Wars copyright belongs to Disney.
-
Fractal Design 3D Print Model
Summary
This design was made using Meshmixer and the program “Structure Synth” which you can download here:http://structuresynth.sourceforge.net/download.php
To print, I scaled the model up by a factor of 10.
The fractal uses the code below to make 25 iterations; each cube at scale .95 is rotated along every axis by 10 degrees
R1
set maxdepth 25
rule R1 {
{ x 0.5 rx 10 ry 10 rz 10 s 0.95 } R1
{ s 4} box
}
Inspired by the Maker’s Muse video.
Print Settings
Printer Brand:
PrintrBot Rafts:
No Supports:
Yes Resolution:
.2 mm Infill:
20% -
STEADY 3 – Camera stabilizer 3D Print Model
Summary
I designed glidecam(also on thingiverse) exactly one year ago… it’s time for update!!!
I found out its very similar to professional ones.
I promise you will be amazed by results when you will be filming with it.
New one is much better than old one and it’s very easy to make it so you must print it !
I’m using STEADY 3 with Canon 700D + Tokina 11-20mm F2.8 + Rode Videomic Pro
New pictures of STEADY 3 SOON !
Designed with: Solidworks
Test video: coming soon
Assembly guide video: https://youtu.be/UtgZ6No8WYg
If you have any more questions send me e-mail: [email protected]
or contact me on facebook: https://www.facebook.com/primoz.padar
PARS LIST:
Head:
1x – Camera screw 1/4″ 17,5mm
1x – M4x30 Screw
1x – M4 Nut
1x – M4 Washer
1x – M8 Threaded rod 55mm
2x – M8 Nut
1x – M8 Washer
Gyro:
4x – Ball bearing(inside diameter: 6mm, outside diameter:13mm, height: 5mm)
1x – Ball bearing(inside diameter: 30mm, outside diameter:55mm, height: 13mm)
2x – M6x20 Screw
1x – M6x50 screw
7x – M6 Nut
2x – M6 Washer
4x – M5x25 Screw
4x – M5 Washer
1x – M8 Nut
Base:
4x – M8x30 Screw
4x – M8 Nut
4x – M8 Washer
As many screws, nuts and washers as you need for weight to balance steady
Print Settings
Printer Brand:
Prusa Printer:
Prusa Clone Rafts:
Doesn’t Matter Supports:
Yes Resolution:
0.3 – 0.2mm Infill:
30-60% -
SphereO The cute and simple spacecraft 3D Print Model
Summary
I made this from a simple sphere on VECTARY. It was suppose to just be a simple alien, sci-fi spaceship. But everyone I show it too say it looks like the head or a helmet. While that was unexpected it does give a funny impression that the aliens are driving around in a giant head or helmet. I can see aliens stepping out of the ship with the same looking head.
Print Settings
Printer Brand:
Wanhao Printer:
Wanhao Duplicator i3 V2 Rafts:
No Supports:
No Resolution:
.2 Notes:
I did print this without any infill, however I did not enable any special mode such as a vase mode. I just changed the infill to zero. -
Dual mosfet mount for Melzi board 3D Print Model
Summary
Call me paranoid, after the connect melt on the Melzi board, I order 2 mosfet for both hotbed and extruder figured they both heat up, if hotbed connect can fail, so do extruder.
Grab rawlogic’s standoff and remix it to hold 2 module. -
Sconce 3D Model
Additional Info: Sconce Donolux W110188-2 – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
Desktop Pen/Pencil Organizer 3D Print Model
Summary
This pen/pencil organizer contains 11 compartments, each with various lengths for easy accessibility. The dimensions are as follows:
L x B x H
130mm x 130mm x 105mm
Feedback is highly appreciated, so please let me know how it works! -
IET Band Holder 3D Print Model
Summary
On the off chance that there’s anyone on Thingiverse that is a 3D Printing AND magic enthusiast like me I decided to upload this. It is a holder and case for IET Bands or loops. If you know how to tie them, now you have a holder for them.
More pictures coming soon. Once I’m done printing.
Print Settings
Rafts:
Doesn’t Matter Supports:
No Resolution:
100 Microns Infill:
Doesn’t Matter Notes:
Printed at 100 microns in order to make it as smooth as possible. Printed at 25 microns on a resin printer might be best. Also haven’t tried it yet but printing in ABS and then Acetone Vapor smoothing could possibly match a resin print. -
Newspaper Holder 3D Print Model
Summary
Just a small holder to hang a standard coat-hanger with a newspaper.
Printed with PLA with 20% infill and with support (maybe it works without it, too, though).
Let me know, if you like it 🙂 -
test your printer 3D Print Model
Summary
Test your printer. This is a smaller print that includes 10 things that are hard for printers to print.Overhangs (60, 45, and 30 degrees)
Horizontal holes (.5 and .2 inches)
Thin walls ( .15, .1, and .05 inches)
Shooting a gap. (.25, .5, .75, and 1 inch)
`Vertical holes. ( .2, .15, .1, and .05 inches)
A tall cone
Horizontal overhang (circle)
Horizontal overhang (square with a point)
Underneath the print there is a square indent
Underneath the print there is also a circle indent.
Hope you enjoy
Comment how your printer did. 🙂 -
i3 Mega Tool Caddy 3D Print Model
Summary
I Noticed there are no tool holders for i3.
Here is my first attempt at one. Fits the right side of the i3 mega.
Fits most tools that come with the i3 Mega except the Spatula.
Will fit the left hand side if you mirror the image in cura
Printed on its front down with no supports.
Print Settings
Printer:
Anycubic i3 Mega Rafts:
No Supports:
No Resolution:
.3 Infill:
100 Notes:
printed on its side down with no supports.
How I Designed This
Used tinkercad -
Horse Stable with Swinging Gate 3D Print Model
Summary
This is a horse stable with a functional swinging gate. The completed stable consists of seven pieces. You need to print two roofs and two sides, the back, the support for the gate, the gate and the detailed wooden floor. The gate is tight in the support to allow easy movement, but it is tight enough to remain where you place it. You may need to clean the holes out of the gate support depending on the accuracy of your printer. It is purposely made a little tight.
Only the gate needs to be printed with supports. You superglue all the parts together to finish the project. The floor has very detailed wood slats that could also be used for other building or just for a tile as well. Textured roof as well as detailed in the wood sides and back.
Print Settings
Printer Brand:
PowerSpec Printer:
PowerSpec 3D Pro Supports:
Yes Resolution:
0.15 Infill:
15% Notes:
Only the gate needs to be printed with supports. -
PolaroidCube Alien5″ Mount 3D Print Model
Summary
A mount to attach the Polaroid cube to a alien 5″ frame.
-Use 3M 6mm screws to hold top on.
-Use plate support for bottom piece. -
Rick Turbo Fan Shroud 3D Print Model
Summary
Rick face fan cover. Enjoy!
Print Settings
Rafts:
No Supports:
Yes Resolution:
.1 Infill:
100
Post-Printing -
Teepee Lashing for 3/4″ PVC 3D Print Model
Summary
Easy to assemble, no Eagle Scout skills (tripod lashings) required.
Not included: 3/4″ PVC pipe, 8 ft long, 9 pieces; Canvas or bedsheet.
Print Settings
Printer Brand:
Prusa Printer:
Prusa Mk2 Rafts:
No Supports:
No Resolution:
0.3mm Infill:
10%+ Notes:
The 3_Hole version can be printed in the default orientation for strong adhesion to the build plate, or upside down if you don’t need much adhesion. -
Curtain 3D Model
Additional Info: Curtain 2 N140617 – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
Tv 3D Model
A professional high-detailed 3D model of a plasma TV with all textures and materials is fully ready for use.
-
ElementalRC Pyro Top Plate 3D Print Model
Summary
made better
4mm
tie wrap mount for D4R/X4R
fixed the XT60 pass-through to not require that stupid screw thing
increased camera clearance in the front
targa center section to facilitate bottom-mount battery with upright VTX whip -
Handlebar Watch Mount 3D Print Model
Summary
When I bought my royal Enfield Continental GT, there wasn’t any clock and the previous owner left a GPS mount so I designed this bracket to mount a cheap handlebar watch.
Print Settings
Printer Brand:
PrintrBot Printer:
Play Rafts:
No Supports:
No Resolution:
0,2 Infill:
100% -
Moto G4 Plus Tactical Cover 3D Print Model
Summary
This is a Moto G4 Plus smartphone tactical cover for mount in a molle system. I did not test yet on field, its a work in progress and can have final modifications. I plan to use it while playing paintball for video recording or use tactical game android application. -
Mountain Bike MTB Mudguard (Specialized) 3D Print Model
Summary
There are plenty of sketches online to make your own MTB mudguard. But why go to all the trouble of tracing, cutting, and punching holes?
This model is designed to be printed at 0.28mm (or 0.3mm) and is exactly 3 layers thick which provides strength while still remaining flexible.
There are versions with and without the Specialized logo. I recommend color changes for the last logo layer.
Print Settings
Printer:
Monoprice Maker Select V2.1 Rafts:
No Supports:
No Resolution:
0.28mm Infill:
100% -
Door Lock 3D Print Model
Summary
This is a “chamber of secret” door’s lock. I designed it to match the snake door handle I had already printed.
I bought a lock door system from the store, painted the button and removed the metal ring to replace it with this customized one.
It’s my Slytherin door, on a bigger Harry Potter’s room project 🙂
Print Settings
Printer:
DAGOMA DiscoEasy 200 Rafts:
Doesn’t Matter Supports:
Yes Resolution:
0.1 Notes:
I made a pause to change color
Post-PrintingHow I Designed This
Wanted to match the real Chamber of Secret logo, but on such a small device, it wasn’t really nice. So I made a simplified version but still efficient 🙂 -
Star Wars: Carrack-class Light Cruiser Free 3D Model
Medium detailed model of a Carrack-class Light Cruiser. Everything is parented to empty (Carrack). The model is totally free to use, but the Star Wars copyright belongs to Disney.
-
GoPro Mount for Longboard 3D Print Model
Summary
Original design was by SteveMachine. I just made his a bit slimmer and filleted some edges to make it look less bocky. -
Minimal K40 Exhaust Adapter 3D Print Model
Summary
Another K40 Laser Cutter exhaust adapter for 3″ hose. In this case designed to be minimal. A one piece version and a two piece version is available. If you are printing on a 3D Printer with a small build area the split version may be better. The yellow one in the picture was printed on an UP! Mini at 100% infill. I cutout a gasket to put behind it on my machine to help with the seal. Also provided is the Rhino 3DM files to make it a little easier if someone else wants to make improvements. -
BB Ball Bearing 3D Print Model
Summary
this is a bb ball bearing you use bb you but in 8 bb or more and oil it -
LCD TV Support for Oculus Rift SENSORS (CV1) 3D Print Model
Summary
A support for placing your Oculus Rift CV1 sensors on the top of a LCD TV.
PLEASE NOTICE: I designed for my LCD TV, which widht is 1,5cm.
But you can rescale it for any LCD TV: just measure your TV width, and change scale for the Z AXIS accordingly.
But only rescale the Z axis, don’t mess with the others! If you do a uniform scale, the Rift sensors won’t fit anymore…
Print Settings
Rafts:
Doesn’t Matter Supports:
Yes Infill:
100% -
Luster 3D Model
Additional Info: Luster S111010 1B – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
Anycubic i3 Mega Spool Stand Filament Guide 3D Print Model
Summary
Quite often, when I moved the printer around, filament would come spiraling off the spool. This helps keep it on the spool. -
Fuse Holder for standard car fuses 3D Print Model
Summary
It’s a remix, because I used the measurements for the fuses from the original. This one is more compact, has no cover, but higher walls. -
ZuckerBehälter 3D Print Model
Summary
Gibt nicht viel zu zu schreiben.
Einfacher Zucker Behälter mit Beschriftung auf dem Deckel. -
Hookah Free 3D Model
model made by polygonal modeling, v ray, as well while rendering was used, render v ray 2.50,01 .Available formats :objfbx3dsmaxThe obj format attached archive in the format of the mtl with the relevant materials. Thank you for your choice and commentsVitaliy Pigolev
-
Remington 870 Free 3D Model
The American gun, first introduced in 1950 by Remington Arms. I present to you her Low Poly Model.The renderer was used: Corona 1.6P.S. Did you have any questions? Want a model, but you need to correct it? – write: https://vk.com/akvaliti
-
Hummingbird Feeder Platform 3D Print Model
Summary
I made a holder and platform for my father’s hummingbird feeder!
-
Keychain Make ART Not WAR 3D Print Model
Summary
Layer Ligth0: 0.15
Shell Thickness: 0.8
Bottom/Top thinckness: 0.2
Fill Density: 25
Filamento: PLA 1.75mm
Print Settings
Printer Brand:
PrintrBot Printer:
Play Rafts:
No Supports:
No Resolution:
0.15 Infill:
0.25Standards
NGSS
Overview and Background
Lesson Plan and Activity
consejos
Esto es un forma de dar contra del rasismo, guerra e indiferencias existentes en nuestro entorno.
Materials Needed
FILAMENTO
PLA 1.75 -
Merle’s Extreme Teen Bible Cover – The Adventure Zone 3D Print Model
Summary
Made a resizeable book cover that you can print and put on top of a book. Thus converting that book into Merle’s Extreme Teen Bible! -
Cheeky Fox Head 3D Print Model
Summary
First thinger I made in ZBrush. Smirky critter. Came out ok. Not sure what else to say :d Could go over it and fix a few lil things but~
Also print it flat not like in the preview here. Idk why it ended up like that
No stealsies/remakes! Just print it and have a fox head thnx 😀 -
Flower 3D Print Model
Summary
The piranha flowers in the Mario brothers games.
Let me know if you like this kind of thing.
Visit my patreon page athttps://www.patreon.com/leobb -
Table 3D Model
Additional Info: Table N110817 – 3D model (*.gsm+*.3ds+*.max) for interior 3d visualization.
-
Filament Sensor and Cover (OEM sensor) 3D Print Model
Summary
Remix version that will work with the sensor that comes with the oem kit.
Print Settings
Printer:
Cr-10 Rafts:
No Supports:
No Resolution:
0.20 Infill:
30
