The file includes texture files just open the model textures will be loaded.
Category: Free 3D Models
Free 3D models ready to be used in your CG projects such as films, visualizations, games, VR etc. All 3D Models and Free 3D Print Models are available for download in several formats including .MAX, .STL, .FBX, .3DS, .C4D, .OBJ, .BLEND, .DWG, .DXF, .LWO and much more. If you’re in search of high-quality Free 3D assets, we have a huge library of 3d models for all your needs. Also you can visit 3D Models and 3D Print Models category.
-
iPhone 8 Plus Bumb Case with Two Wolves Howling to Apple 3D Print Model
Summary
Case Bumper for an iPhone 8 Plus with the design f two wioves howling.
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
Yes Supports:
No Resolution:
15 mm Infill:
20 mm -
BB follower for Celcius AKM magazine 3D Print Model
Summary
Basically, this BB follower is designed for Celcius AKM magazine and it is good to bolt stop function enhancement. After print, you don’t need to modify it, but it is depend on print quality. Before assembly, please test compatibility of the follower. -
Mmagnetic holder Li-Ion battery 18650 3D Print Model
Summary
Magnetic holder
holder: Li-Ion battery 18650 – 3 pcs.
magnet: D 8 (mm) x h 3 (mm)
PLA / ABS
0.2 mm -
Anet A8 Laser bracket / Mount (Fits to E3D bracket) IN PROGRESS 3D Print Model
Summary
Anet A8 Laser bracket / Mount (Fits to E3D bracket) IN PROGRESS
I bought an laser to mount on my Anet a8.
But than i would need to take of my hotend, and recalibrate it every time.
Therefor i designed this bracket which i can mount next to my E3D V6.
I made this one for my 2.5W laser. -
Replacement Piano Key 3D Print Model
Summary
This is the Sharp Or Flat Key to a toy piano. We bought it at a thrift store for $3 it needed two keys, the replacement works great. -
Calibration Wall 9×3 mm 3D Print Model
Summary
This part has tabs and holes.
The center tab of the row of 5 is supposed to be exactly 9×3 mm in size. Same for the hole in this tab. The two tabs to the left and to the right are smaller and bigger with increments of 0.2mm. The holes to the left and to the right have increments of 0.1mm.
There are three extra tabs down on the build plate, all of them exactly 9×3 but in different orientations.
If you print two, try one of the 9x3mm tabs to fit in the holes. You will see if your printer generates holes too small or too big. If so, chances are that walls are also too thin or too fat.
In Cura the parameter to compensate for this is called ‘horizontal expansion’. A negative value is needed, if holes are too small.
This test assumes that scaling is already correct. E.g. a 100mm rod is 100mm long. Plus minus a few tenths of a mm.
If you only print one, you can easily break away one of the three outer tabs, or cut away one end. -
Lulzbot Mini Raspberry Pi V2 Camera Mount 3D Print Model
Summary
I used the files from Pschwamb to help develop a way to mount my Raspberry Pi Camera V2 inside my Lulzbot Mini. I added some mounting tabs on his base that fit the whole spacing on the mini. I have uploaded pictures of the camera installed. I ran the ribbon cable thru the small window on the left side of the machine. I am also added a screenshot of the camera view it gives. I should note that for the screenshot I am also using my LED light I have uploaded on thingiverse if you are interested in having some light inside the machine.
Print Settings
Printer Brand:
LulzBot Printer:
Mini Rafts:
Doesn’t Matter Supports:
Doesn’t Matter Resolution:
0.2 Infill:
30% -
AM8 Z Axis Single Bearing 3D Print Model
Summary
I’ve broke a few of these trying to slide it onto the 2020 v-slot extrusion. The back of it also rubs against the 2040 vertical extrusions. I removed some of the material from the inside to allow it to slide onto the 2020 easier and removed some from the back so it didn’t rub on the 2040 vertical extrusions.
Mirror the part for the opposite side.
Print Settings
Printer:
AM8 Rafts:
No Supports:
No Resolution:
.2 Infill:
80% -
MASON JAR PAINTBRUSH HOLDER 3D Print Model
Summary
Idea taken from GW’s water pot — Designed to wash your brushes in, the water pot uses a widemouth mason jar and features a lid which holds up to 16 brushes of various sizes, allowing them to rest in the water without flattening and bending their bristles on the bottom of the pot.
Print Settings
Printer:
SINDOH 3DWOX DP200 Resolution:
.2 -
BMW 6 Series (F06) RedBull Adapter 3D Print Model
Summary
This is an adapter for the BMW 6 Series (F06) cup holder so it will fit a normal RedBull can it also includes a BMW logo inside 😉
Print Settings
Printer Brand:
Prusa Printer:
Prusa Mk2 Rafts:
Doesn’t Matter Supports:
Doesn’t Matter Resolution:
I printed at 0.2mm layer height Infill:
I printed at 20% infill -
Tree 01 Free 3D Model
Tree, made with photogrammetry in a forest in Belgium. This is a part of a serie of causual 3D scan of tree for game development or CG. Please use it for your project (only for non-commercial 😉 ). Made with ReMake and ReCap Pro from AutoDesk.
-
Nessie – Cute Loch Ness Monster 3D Print Model
Summary
Nessie – Cute Loch Ness Monster.
Sculpt Practice in Blender. -
Extruder_Bracket_PTFE_Insert_Remix 3D Print Model
Summary
This is joshvv’s original with a simple wire holder added. -
Wardrobe 3D Model
Additional Info: Wardrobe ARKELSTORP IKEA N021217 – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
Curtain 3D Model
Additional Info: Curtain N061217 – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
Dodge Charger Galaxy S8 Otterbox Defender Phone Holder 3D Print Model
Summary
So I got sick of my phone not having a place to sit in the car. I tweaked the heck out of the awesome design that TTTurner68 did. I will update after I print it out.
It should allow you to slide the phone in from the front, built it in 5 pieces to allow it to breakaway neater and fit together solidly. It should work on 2015-2017 Dodge Chargers at the very least and sits solidly in the whatever that thing is next to the gear shift.
Please feel free to comment, critique, remix. I’m still learning this and can use all the input I can get. -
Prusa Steel X axis with tensioner and 8mm leadscrew support 3D Print Model
Summary
This X axis for the Prusa steel frame features a convenient single screw belt tensioner and supports 8mm leadscrews.
You need some M3 screws and nuts to mount the leadscrew nuts in place, a M4 screw and nut for the tensioner and a M5 screw and nut for the toothed idler, I use a cheap aliexpress toothed idler with a M5 bore.
Prints without supports.
Print Settings
Printer Brand:
Prusa Printer:
Prusa Steel Rafts:
Doesn’t Matter Supports:
No Resolution:
0.3-0.25 Infill:
25-30% -
Clothes peg 3D Print Model
Summary
I guess it would have been cheaper to buy new clothes pegs, but I wanted to reuse the spring, so I 3D-printed it. -
Y axis completely 3D Print Model
Summary
This is a complete construction of the Y axis on the 40×20 nut 5 A profile. The motor is a NEMA 17 with 22 mm flange, dimensions 42.3×42.3×39.2 mm, without shaft. The shaft is 22.6 mm long and has Ø 5 mm. The assembly mountet with M5x12mm screws 12 pieces, M3x12mm countersunk screws 4 pieces (motor mount), M3x24mm 1 piece and 2 self-tapping screws Ø2mm x10mm 2 pieces. The assembly of the motor must be carried out after mounting the mounting on the A-profile.
This is a very compact design that does not need any extra parts when using hot bed mount ANET and other 3D printers.
The idea of the development was, as economical as possible, to use the space and get by with a few parts. -
pmd evolution guild interior Free 3D Model
the first blend I upload is a fan work of a fan work of a spin-off game insert ellipsis figures
-
Sonic Hedgehog Free 3D Model
This is a model that I have been working on, but just so you all know there are “two” rigs. One for the body, and the other the mouth movement.
-
Diesel Locomotive Free 3D Model
first time i made a 3d model with blender.
there is no texture and no rigs. -
PowerOutletAS_NZS 3112 twin power socket Free 3D Model
PowerOutletAS_NZS 3112 Looked on here for a power outlet. Not finding the local variety, I decided to build one, and complimentary safety stopper. So if it ever happens again..
-
HK Diversity Receiver Mount to Ground Station Power Supply 3D Print Model
Summary
Bought Hobby King ground station power supply with HK Diversity Receiver
Power supply comes with two mounting brackets for single receiver and none for diversity one.
So I made one. Will post picture when printed. -
LOL Clock redesign 3D Print Model
Summary
This is a remake of robaux’s LOL Clock (https://www.thingiverse.com/thing:2219658). A new back piece 18mm thinner than the original has holes for the power socket and buttons.
A new circuit design has been done that uses two LED constant current drivers and five MOSFETs row drivers. There are two PCBs. One to hold all the LEDs (board is cut in half so that it can go in the case) and the second board holds the Arduino Mini, DS1307 RTC, DC-DC Buck convertor, Constant current LED drivers/shift registers and some buttons to set the time.
All Eagle files and Arduino sketch have been included along with the new back STL file. I made my boards using the toner method. The board contains SMD components because that is what I had on hand.
……………………………
To set the time:
Press the MODE button, the hours will flash 5 times a second
Use the UP and DOWN buttons to set the hours
Press the MODE button, the minutes will flash 5 times a second
Use the UP and DOWN buttons to set the minutes
Press the MODE button and the normal time mode is shown. (denoted by the colon separator flashing once a second). -
Jupiter 3D Print Model
Summary
Hello fellow space travelers
Here is a 140mm diameter Jupiter. Enjoy!
Print Settings
Printer:
Maker Select V2 Rafts:
Yes Supports:
No Resolution:
.02mm Infill:
100% Notes:
I would recommend a raft since there is not much surface area on the printbed.
You may need to add supports at the very bottom depending on how well your printer handles overhangs.
Post-Printing -
Beer Bomber Holder (Horizontal) for Shelves 3D Print Model
Summary
Scared Sh*tless that your precious cellar beers are going to decide to roll off the shelf one day, well preemptively maximize their entropy with this horizontal beer caddy. Also good for tight spaces in the fridge. 3″ diameter and 4″ long, meant for 22oz bombers but can hold anything smaller obviously.
Print Settings
Printer:
D300VS Rafts:
Yes Supports:
No Resolution:
0.2 / 0.4 mm h/w Infill:
100% with 3 loops -
DinosaurNothlit’s Maker Coin 3D Print Model
Summary
It’s my maker coin. It’s the thing I use to test filaments and such. I don’t really care if other people use it (why else would I post it here, after all?), but it’s worth noting that it’s a lot more fun to design your own! -
40mm Fan Grille 3D Print Model
Summary
Fan shroud for a 40mm fan. After destroying two fans I decided it was time to protect the third one. -
Component tester mounting for type: Hiland DIY M12864 3D Print Model
Summary
Requires to drill and tap to M3
4 off M3 x 10mm screws
2 off M3 x 15mm screws
OR
Small self tappers
Printer Anet A6
200 degrees nozzel, 50 degrees bed
50mm/sec speed, infill 20%, print flat side down.
Print Settings
Printer:
Anet A6 Rafts:
Doesn’t Matter Supports:
Doesn’t Matter Resolution:
.2 Infill:
20% -
iPhone6 dock for Fairtec cable and Tech21 cover 3D Print Model
Summary
Created an iPhone6 dock that is compatible with Fairtec charging cable and Tech21 cover.
Print Settings
Printer:
Creality CR10 Rafts:
No Supports:
No Resolution:
0.2mm Infill:
20% -
Clip for AT&T Slimline phone 3D Print Model
Summary
This replaces that little clip that both ensures the phone hangs up and holds it to the wall. It’s easy to break off the little nub that the phone hangs on. -
Vertical Lamp Free 3D Model
Vertical stylish modern looking lamp, with power cord and plug. Uses cycles principled shader for materials. Adjustable bulb with black body temperature, just input an emission strength in the material node to turn the lamp on. I tried to keep it low polygon count, approx 3k triangles.
-
Lightsaber Free 3D Model
Lightsaber blue with compositor and fullset up + glare and stuff,youcan tweakaround withit and change the color or use it in a scene or as a asset.
-
Camera Setup Free 3D Model
This setup provide a very useful camera setup!You can move and rotate the camera directly inside the camera
-
cool mountain Free 3D Model
this a mountain i made using the proportional editing tool, I’m sure people have done this before, but i was excited when i thought of this
-
tires Free 3D Model
just a file dump, use them if you need it, there are the pre-modifier versions as well.
-
Xmas Tree Free 3D Model
Inspired by Iago Mota’s Tutorials. Particles emitting particles.
If you want to render it, then you have to bake all dynamics first.
For that you will need a lot of memory (ca. 20 GB) and storage space (2.3 GB).
-
Sci-Fi Robot Free 3D Model
A robot is a machineâÃÂÃÂespecially one programmable by a computerâÃÂàcapable of carrying out a complex series of actions automatically.[2] Robots can be guided by an external control device or the control may be embedded within. Robots may be constructed to take on human form but most robots are machines designed to perform a task with no regard to how they look
-
Plant 01 Free 3D Model
Free Model of 3DPlants.com “Plant Model Libary CD?s” and Downloadable Model Sets! This Model also available on CD…with UV mapped textures! More Info?s, Preview Images, Shop and Downloadable Texture Sets or a “Seamless Natural Texture CD” you find directly at 3DPlants.com!
-
M8 Handle 3D Print Model
Summary
M8 Handle. Enjoy
Print Settings
Rafts:
Doesn’t Matter Supports:
Doesn’t Matter Resolution:
.1 > .2 Infill:
35% > 100% -
VESA Poll Mount 3D Print Model
Summary
This is a VESA poll mount for 56mm / 2.18″ poll and 75 or 100 VESA plates. It was built for to hang my Intel NUC computer on the back of my display. -
Aluminatus Extrusion End Covers 20mm x 60mm 3D Print Model
Summary
Removed the lines and made it smooth on the outside.
Printed in ABS
.2 Layer height -
Armchair 3D Model
Additional Info: Armchair 1 – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
yet another Dual DMOS holder 3D Print Model
Summary
Another Dual DMOS holder for the bigger DMOS Version like this: https://www.amazon.de/gp/product/B0714JXQT7/
fits into existing holes -
Twin-linked autocannon for Genestealer Cults Galyat Truck 3D Print Model
Summary
Weapon option to the Genestealer Cults Galyat Truck available at https://www.thingiverse.com/thing:2736962
Print base, cannon 1 and cannon 2 for the complete assembly. -
Nerf top mount rails 3D Print Model
Summary
Nerf top mount rails… should be compatible with Worker mod top mount rails
e.g. https://www.amazon.com/Worker-15-Slot-Picatinny-Mount-Printed/dp/B0767G117B/ref=sr_1_8 -
Procedural Curtain Shader Free 3D Model
I prepared a procedural curtain shader for major production that is more easily customizable for any preferences. This is much more easy-to-apply,scalable and more fun to apply additional textures on it. Feel free to use for any purpose. Credit me a little bit though :3
-
BBQ , barbecue Free 3D Model
barbecue combines all kinds of ways of cooking products (traditionally meat, but the term has spread to cooking fish, poultry, vegetables, fruits, desserts, toasting slices of bread) on the heat of coal, gas or electric heat heater – this is a shish kebab, and a grill, and kebab , and khorovats, and mtsvadi, and braai, and shurasko, and yakiniku.
-
True Excalibur Free 3D Model
This is the True Excalibur, the strongest weapon of the forces of light from the game Terraria.
-
Bayonet for AK Pattern Rifle Free 3D Model
The fixed blade that sticks to the end of a rifle, used to stab things with it. Comes with a hard sheath to use as scissors.
-
Detailed AK with Internals Free 3D Model
Ak-M rifle used in East bloc countries with accurate internals
-
Toa of Light Free 3D Model
This is a non rigged model of the Toa of Light from the first bionicle movie. Please leave me commits about this model.
Enjoy. -
alien corridor Free 3D Model
made after watching some tutorials. Andrew Price and many others gave me the idea.
-
Narin Folding Chair Free 3D Model
Furniture modeling study about folding chairs.
Designed by David Irwin. -
A Plate Free 3D Model
I was in need of a plate, and the one in BMF’s “Early Morning Breakfast” looked perfect. Unfortunately, the blue ring pattern was part of the mesh (I wanted it as a texture map), and figuring out baking with BI was a pain. I realized it was easier for me to remodel the thing from scratch in Cycles, so I did.
-
Low Poly Christmas Ball Free 3D Model
Low poly style Christmas globe, for Cycles. Made by Lucas Van Dorpe (follow me on Facebook/3DPilot or Youtube/3Dpilot !)
-
Ruger 10/22 Dummy Receiver (PROP) 3D Print Model
Summary
This is only a prop and does not work on a real firearm. I’m using it on a futuristic looking prop gun.
!Don’t forget to CHECK OUT my other designs and FOLLOW my daily KooKoo uploads, Enjoy 😉 -
Playing Card Holder 3D Print Model
Summary
This handy holder sits nice and stable and will hold up to 20 (15-17 average) playing cards depending on size. With its subtle curve and slight rear tilt, it holds the cards at an optimal angle and keeps your hand out of view of prying eyes. I use these for playing “Tick” or “Arizona Rummy”. -
Geoffs Tent Rope /Guy wireTensioner 3D Print Model
Summary
simple – but very useful, print 1 or a set of 12 -
MPSM Fully Adjustable Z Spacer (MP Select Mini) 3D Print Model
Summary
Fully Adjustable Z Spacer
MP Select Mini
By Wiley Kyoto
This Z spacer is designed to give you continuous adjustment from 1mm to 5mm. If you want to switch between the stock bed and glass bed, you don’t have to adjust your print bed and then re-level it. If the beds already level, just adjust the spacer for the change in height to account for the glass thickness. Also If you change nozzles, the new one might be slightly longer or shorter, so just adjust the Z offset accordingly. I gave the Bracket a slight bend so it keeps constant pressure to hold it firmly in place.
My Print Setup:
PLA
210/60C
No Supports
0.175mm Layer Height
1.4mm Wall Thickness
1.05mm Top and Bottom Thickness
Orientation – Lay the AdjArm and Bracket flat on their sides. Put the AdjDial on one of the flat ends (I had numbers near the top).
Assembly:
Put the AdjDial on the Bracket, in the groove next to the indicator mark, with the numbers closest to the outside edge.
Insert the sloped edge of the AdjArm through the AdjDial, with the threads of the AdjArm facing away from the Bracket.
Keep pressure pushing the AdjArm into the AdjDial as you start to turn the AdjDial clockwise. Keeping in mind that the thread is reversed thread, such that turning the AdjDial clockwise will wind the AdjArm farther in.
Set the AdjDial to roughly the right spot (See Reading the Dial).
Make sure the head position of the printer is a good couple centimetres in the +Z direction, to prevent damage to the Z limit switch.
Insert the assembled spacer through the vertical slot in the back of the printer tower, snapping it into place on the Z Bearing Block(Black Plastic Block with metal rods running vertically through it), which you can see through the vertical slot. You should hear and feel a solid click as it snaps securely into place, pushing forward firmly on the top lever of the spacer should help it snap into place.
Make final adjustments the the AdjDial but homing the printer and checking the fit with a piece of paper under the nozzle.
Reading the Dial:
Note – the readings won’t have absolute accuracy as it depends on the exact placement of the Z Limit switch, but the relative accuracy should be great.
The AdjArm has 4 notches, with numbers 1 to 4 next to them. These represent whole mm steps.
The AdjDial has 40 notches, every 4 notches are numbered .0 through .9. These represent decimal mm steps. Each notch is a 0.025mm step.
The Bracket has one indicator notch which lines up with the notches on the AdjDial to indicate where to read the setting.
When the outside edge of the Bracket is lined up with the first notch(next to the 1) on the AdjArm and the .0 setting on the AdjDial is centred on the indicator notch, the spacer is set to 1.0mm.
When the AdjArm is all the way into the AdjDial, and the AdjDial is set to .0, the spacer is set to 5.0mm.
The spacer can be set less than 1mm but at some point (around 0.7mm on my printer) the limit switch will slip off the end of the spacer and effectively act as 0mm offset. -
Panther 3D Print Model
Summary
A low poly panther with voronoi structure generated using voronator.com. Tried using Cura for 5 times using different settings for temperature, speed, retraction and support none of them worked. Simplify3D did the trick in first go! ( love it!) . Painted yellow acrylic paint, no sanding.
Used Meshmixer for orientation, that why the panther seems to be sleepy 🙂
Print Settings
Printer:
Monoprice Maker v2 Rafts:
Yes Supports:
Yes Infill:
0% Notes:
Keep an eye on the support for tail needs a little massaging after automatic support generation in Simplify3D.
