12 Chinese Zodiacs
Category: 3D Print Models
Premium & 3D Print models ready to be 3d printed. 3D Print Models and Free 3D Print Models are available for download in several formats including .STL, .3DM, .OBJ, .3DS, .DAE, .SKP, .BLEND, .DWG, .DXF, .STEP and much more. If you’re in search of high-quality 3D printed assets, we have a huge library of 3d print models for any of your needs. Also you can visit 3D Models and All 3D Models category.
-
Quick release for Raspberry Pi Case 3D Print Model
Summary
This is a quick release mount for the case https://www.thingiverse.com/thing:922740
Wanted to be able to quickly take my Pi out of my printing cabinet when I need it for another project.
Print with high infill to make the pegs stronger.
Post print: push each peg through a hole a few times to clean up any residue. This will make it easier to put all 4 pegs on at once (IE they won’t break when you try to remove).
This is set up with my printers tolerances so it may be a bad fit for your case. You can edit the peg sizes here: https://www.tinkercad.com/things/l91VsItmHf9-raspberrypi-quick-release -
voldemort wand small version (pendant) 3D Print Model
Summary
Size of this wand is
Z= 15mm
X= 28mm
Y= 106.803mm
You can use whatever you want.
Print Settings
Printer:
Anet A8 Rafts:
Doesn’t Matter Supports:
Yes Resolution:
.1mm Infill:
100% Notes:
Nozzle size 0.2mm diameter.
Printing speed 60mm/s -
Replacement Sunglass Frames 3D Print Model
Summary
I play volleyball and break a pair of glasses every season (which is why I buy cheap ones…), but this year it happened early in the season, and I decided that I was going to build my own replacement… after all the lenses were perfectly fine.
The frame (green plastic) is modeled after, and uses the the lenses from a pair of inexpensive Foster Grant “Slam Dunk” Polarized sunglasses. (Frame name was imprinted on on temple of the original frames).
I designed these replacement frames from scratch, and tweaked the design a lot to get the lenses to snap in and hold firm just right. I used the original temples (black plastic) and hinge screws.
Print Settings
Printer:
Anet A6 Rafts:
No Supports:
Yes Resolution:
Fine Infill:
60% Notes:
I used supports to the build plane only. -
Iphone 7 Case – Tiger Stripes Dual Exrusion 3D Print Model
Summary
Tiger striped pattern Iphone 7 case for dual extrusion machines.
Please make sure you align the bodies together before printing. (You can tell when the camera holes line up).
Print Settings
Printer Brand:
FlashForge Printer:
Creator Pro Rafts:
No Supports:
No Resolution:
.16 Infill:
20 -
Generic Office Cube Wall Hanger 3D Print Model
Summary
Used for hanging something on a cube wall. Was specifically created to hang a whiteboard on the cube wall, using the metal clips that came with the whiteboard.
Designed for a 50mm width cube wall.
Print Settings
Printer:
Tronxy X3 Rafts:
Yes Supports:
No Resolution:
.2 Infill:
0% Notes:
Used 2mm walls, with no infill.
How I Designed This
Designed in Fusion 360 -
Skull with diamonds 3D Print Model
This is a remix of my other skull http://cults3d.com/en/home/skull-gunnarf1986
-
Thwomp from Mario 3D Print Model
I made this Thwomp organiser for your desk top or if you want to size it up to be able to fit even more cool stuff in it. =]
-
4x4in label holder no lid 3D Print Model
Summary
the 4x4in label holder without lid, if you want to print them separately -
Tina Original Design 3D Print Model
Summary
Camper Christina created her own original design.
Print Settings
Printer Brand:
MakerBot Printer:
MakerBot Replicator+ Rafts:
Doesn’t Matter -
4×4 label holder lid 3D Print Model
Summary
the lid to go with the separate label holder. This set is smaller then the combined set. -
Kirby Whispy Woods Plant Pot 3D Print Model
Summary
Nintendo Kirby Whispy Woods Inspired Plant Pot.
This plant pot is inspired by Whispy Woods, the tree boss from Kirby.
This garden accessory is printed in Polywood and helped bring the character to life, it’s up to you to give them a bushy head of leaves that it so desperately needs!
You may need to scale him up a bit in which ever 3D print software you use is, as I made the design smaller than I intended to.
Print Settings
Printer Brand:
Ultimaker Printer:
Ultimaker 2 Extended Rafts:
No Supports:
Yes Resolution:
0.2 Infill:
8-10%
How I Designed This
Designed using Fusion 360 -
Threaded Shark Container 3D Print Model
Summary
Container for holding shark teeth (or whatever else you want) in honor of #sharkweek!
Designed in OpenSCAD with the use of @parkinbot’s threading.scad library. -
PS4 Controller Holder 3D Print Model
A neat Creature type PS4 Controller Holder. Call it the alien PS4 Controller Holder
-
Twisted Vase 3D Print Model
Hello!
This is a vase I created using a shape generator in Tinkercad! Here’s a video on how these were designed! Enjoy! -
kea Brio railroad crossing 3D Print Model
Yet another ikea/brio railroad crossing. it is modular to simplify printing.
Use m3 bolts/nuts to connect parts and for axis.
Wanted to make it durable and easy to repaire/replace parts. -
Wrench M3 M4 & M5 3D Print Model
For all the people who need a wrench for small metric nuts. 🙂
-
Male Orc with Shield and Hand Ax 3D Print Model
Summary
Male Orc with shield and ax. Positioned in Blender then scaled and edited onto the base using MeshMixer. -
BT 880 “Mickey” Supertank 3D Print Model
Summary
Representing the first of the new generation super tanks, the “Mickey” BT 880 was widely used and replaced previous vehicles in most tank formations of the Federation. The vehicle is powered by a massive Smith and Westor nuclear generator at the back left, and separate generators at the back of the turret. This supertank, although slower than previous smaller vehicles was very well protected by shields and heavy Carbon armour.
The main armament was a double 244mm Nuclear Slug Cannons, as well as two 142mm nuke cannons. This larger guns could fire at extreme range (up to 5000km) and was provided with a dedicated rangefinder on the turret roof. The size of the vehicle meant that up to 50 nuclear rounds could be carried, as well as hundreds of other rounds. HE and AT dart rounds were also carried, and a common tactic against similarly shielded vehicles would be to ripple fire the 142mm guns and then the 244mm guns. The smaller nuke rounds would reduce the shielding, and the second 244mm Nuclear round round destroy anything. Against un-shielded targets a single nuke round would normally be enough, although in many situations a HE or AT round would be preferable especially if friendlies were nearby and to reduce collateral damage to civilians and infrastructure. -
Folgertech FT5 Cooler 3D Print Model
Summary
Needed a cooler for the FT5 with stock extruder assembly, but using 713maker ultralight extruder mount. -
Bigmouth Bubbler Lid Clamp 3D Print Model
Summary
The Bigmouth Bubbler plastic carboy has issues with the lid pushing out under certain circumstances. This is my solution for the issue. The main ring clamps under the collar and the arms clip over the lid to hold it down and secure. I printer it it of PETG and used stainless 4mm hardware to assemble. This way I don’t fear dunking it in sanitizer if needed.
Print Settings
Printer:
Prusa MK2 Original Rafts:
No Supports:
No Resolution:
.20 Infill:
30 Notes:
Clean holes and use 4mm stainless hardware. -
Rubber Band SlingShot for Kids 3D Print Model
A neat little Rubberband Slingshot. You can make shots using paper piece. Works superb. Kids love it.
-
Spinning Filament Holder 3D Print Model
Created this for my Geetech MeCreator 2 Desktop 3D Printer. Holds lots of filament and moves and spins very free. No load on Extruder filament feeder motor. no tangles. Easy use.
-
Fastening clip 3D Print Model
Production of a staple for fixing the vehicle beams
in abs with foot fixing hole diameter 6 mm or without fixing foot. -
Hamangia Couple 3D Print Model
Based on the ancient sculptures from the Hamangia Culture, around 5000 BC. https://en.wikipedia.org/wiki/Hamangia_culture
-
Anet A8 Fan short nozzle with optimized air flow 3D Print Model
Summary
I use a shorter nozzle so i need another fan. The fan have an opitmized air flow.
Print Settings
Printer:
Anet A8 Supports:
Yes Resolution:
0,1mm Infill:
25 % -
Great Wall Hover H5 Four-drive Switch Cover 3D Print Model
Summary
Great Wall Hover H5 （Great Wall X200/X240） Four-drive Switch Cover,2H/4H/4L Switch Cover -
Mouse Pookah Space Pirate (28mm/Heroic scale) 3D Print Model
Summary
This character is from our tabletop roleplaying game, Wayfarer: Things Beyond Wonder.
We’ve set up a Patreon page for anyone who’s interested in helping to fund us so we can keep making free and open sourced games like Pocket-Tactics, Discord, and others, not to mention the growing catalog of gaming miniatures that you can use for whatever you want! (Psst… we take requests and commissions…)
Enjoy! -
Matek PDB XT60 cover protection 3D Print Model
Summary
Protection anti sock for electric conections and make more easy unplug the connector
Protección para que no de la corriente con las conexiones al desconectar. Mucho mas sencillo desconectar la batería de un dron.
Print Settings
Printer:
p3Steel Rafts:
Doesn’t Matter Supports:
Yes Resolution:
0.2mm -
Golf cup 3D Print Model
Use this at your house to practice putting! The cup has been optimized such that a good shot will not roll around and come back down the ramp. A bonus shot is to land the ball in the small cutout in the center of the cup.
-
Thames Dolphin Lamp Standard 3D Print Model
Thames Dolphin lamp standard’s history goes back to the 19th century. We scanned one of the creatures by taking as many pictures as we could from all possible angles. As we couldn’t cover all the angles, we’ve done some fixing in Autodesk ReMake and sculpting in Meshmixer. It printed very well and it didn’t need many supports. After a huge amount of time spent patching and fixing, we have a lovely replica of the Dolphin Standard.
-
Garden of Innocents Logo Plate 3D Print Model
Summary
Garden of Innocents (GOI) is a non-profit charity that provides a dignified memorial and burial for children who remains have been abandoned or not been claimed by any family.
Information about the Garden of Innocents can be found here, http://www.gardenofinnocence.org/
As part of an ongoing project, I am designing a 3D printable urn to donate to Garden of Innocents. I challenge other 3D printers and designers to print and design their own urns to donate to GOI.
This log plate is designed to be printed flat, with the option to change colors for each layer to produce a multicolored GOI logo that you can attach to any urn you make. You can also take this logo plate and place it into the print, or attach any other way you wish.
GOI relief logo1.stl and GOI relief 2.stl are different versions you can use in your project.
Print Settings
Printer Brand:
LulzBot Printer:
TAZ 5 Rafts:
Doesn’t Matter Supports:
No Resolution:
0.2 – 0.5 Infill:
5 – 10 % Notes:
Print in 4 colors. The first layer should be light blue, 2d gold / yellow, 3d dark blue, 4th white or black.
Each layer is 2 mm thick, so you can slice or add g code to pause and change filaments -
Okami Amaterasu – Thicker tail for printing 3D Print Model
Summary
This is a remix of Amaterasu by kijai. The only thing I did was make the point where the tail connects to the body a bit thicker, since it was very prone to breaking on the one I printed. There are also fewer triangles on this model, because the original file was really massive and nearly crashed Meshmixer. -
1x2x2 Heart Cube 3D Print Model
Summary
I made this as a simple test for a 19mm-cubie 1x2x2 design, intended for use in future projects. It can hardly be considered a puzzle, since it has something like 3-4 possible positions. The heart extensions were designed and printed after being inspired by the transparent red filament used to print the base “puzzle”.
Like many of my designs, this “puzzle” is designed to be assembled without hardware. However, I haven’t gotten my peg design quite right yet, so the rim of the peg needs to be trimmed down a bit with some wire cutters in order to fit in the hole. It turns alright straight off the printer, but a little spritz of silicon lube does wonders.
As it is, this is more of a cute fidget toy than a proper twisty puzzle. If I could size it down some more, it would make a nice keychain or bag charm for any twisty puzzle enthusiast.
PARTS LIST:
1x Anchor.stl
1x Ball.stl
3x Edge.stl
1x Heart.stl
Print Settings
Printer Brand:
Up! Printer:
Up Mini Rafts:
Doesn’t Matter Supports:
Yes Notes:
Anchor.stl and Ball.stl should be printed at slightly higher infill, because 3D printers sometimes have trouble dealing with spheres. If you are using a perforated bed (standard on the Up Mini 2) rafts are recommended to avoid a bumpy bottom texture.
At this moment, the rim of the peg needs to be trimmed down with a knife/cutter until it can fit into the hole. I will probably fix this design flaw in the future, though it is not a top priority.
Jamming a folded strip of paper into the notch of the peg helps it stay in a lot tighter. Recommended to prevent popping. -
Anet A8 Side Filament Guide V2 3D Print Model
Summary
Slots onto the corner of an Anet A8 and guides filament coming in from the side.
Will work with any T joint that is 8mm thick.
If you print one off, click “I Made One” above and show me!
This is the second version of this filament guide, you can view the previous version here: https://www.thingiverse.com/thing:2076358
Improvements:
Smaller size
Improved filament insertion slot
Reduced volume
Print Settings
Printer:
Anet A8 Rafts:
Doesn’t Matter Supports:
No Infill:
20%-100% recommended -
Toothbrush Travel Case 3D Print Model
Summary
Friction-fit standard size toothbrush travel case. Fits toothbrushes smaller than ~19cm long. A 2mm hole has been added to the top to allow some airflow.
Print Settings
Printer:
UP Mini 2 Rafts:
No Supports:
Yes Resolution:
0.3 Infill:
13% Notes:
I used UP PLA. With 0.3, some banding on the curved end occurs, but looks great otherwise. Print both sides with the end up. Supports are needed for the inner and outer ridges on the friction-fit parts, but should not be necessary for the ends.
How I Designed This
Designed in Tinkercad. -
Maximilian-Evil Genius 3D Model
Maximilian-Evil Genius 3D print modelGreat 3d printable Maximilian Model form the Evil Genius Game
-
EARRINGS POINT OF EXCLAMATION 3D Print Model
I present to you one of my creations a pair of earrings in the form of exclamation point
-
Custom logo stamp 3D Print Model
With this stamp you can very easily make custom t-shirts or other textiles with your own logo, writings etc …
-
Jubei-Evil Genius 3D Model
Jubei-Evil Genius 3D print modelGreat 3d printable Jubei Model form the Evil Genius Game
-
Toolbox ( for Screws ) 3D Print Model
Summary
Toolbox for my Screws and other small things ( L x B x H, 120mm x 100mm x 90mm )
How I Designed This
China 60W CO2 Laser, Speed 15mm/s, Laserpower 65%, 4mm poplar plywood -
Cluster Charge | Rainbow 6 Siege 3D Print Model
Summary
This is a model of Fuze’s Cluster Charge from Rainbow Six Siege. Unfortunately I can’t print it yet because my 3D printer isn’t working, but once I fix it I will post a picture of the object printed and painted. Remember to give this a like and comment if you want to see anymore Rainbow Six Siege gadgets. -
Boar figurine 3D Model
Boar figurine 3D print modelHigh poly figure of boar.Meters was used as measure units, it is 8 cm from tail to snout.File contains one mesh object. Poly count : 319648Model is printable, checked with addon for blender ‘3D Printing Toolbox’ and with shapeways.Presentation consists mainly from screenshots.Available formats is .blend, .fbx, .stl, .obj, .3ds.Native format is .blend.
-
Dremel Router Attachment 3D Print Model
Summary
This is a remix of another design in which I added slopes to 90° edges to improve strength, added bolt recesses for better functionality, added measurement marks, and did some overall trimming to reduce material that did not contribute to strength. I printed this in true silver Hatchbox PLA. I personally have a Dremel 4000, but from what I have read, this will work on any Dremel with the same threading.
I would say a raft is essential to prevent lifting
x2 1/4″ bolts (4 in)
x6 1/4″ nuts
Print Settings
Printer Brand:
Prusa Printer:
Prusa Mk2 Rafts:
Yes Supports:
Yes Resolution:
.2 Infill:
15% Notes:
Raft is essential to prevent lifting. -
AM8 Tablet Holder 3D Print Model
Summary
This is a tablet holder for the AM8. With Octoprint, you can replace your printer’s screen with a dedicated cheap/old tablet. This was designed with the Kindle Fire in mind, but it should work with many different tablets.
Print Settings
Printer:
Anet AM8 Rafts:
No Supports:
No -
Hunter Knife Handle Scales 3D Print Model
Summary
Let me open with a thank you to WinterHawk904 for his great Destiny knife model.
These are handle scales that would go on the sides of the handle to fill out the grip and protect the hand from kinetic shock and kinetic transfer down the steel of the blade and full length tang. They’re used a lot in knives of today, and seeing as how the knife hasn’t changed terribly much in function over all of recorded history, I set out to make some handle scales for this far future knife because it needed them (550 cord only goes so far!)
As an aside, I also made these handle scales because I split my knife into two pieces for printing…in about the middle of the handle (using Autodesk MeshMixer). This is about the right size for a 300×300 build plate. As noted by some other makers the cross section of the blade is too small (even for this HUGE knife) to just glue the ends together and be done with it.
Without there being much material to play with in the knife’s cross section (to create more complex joints) I opted for an outside approach to increase the gluing surface area…which meant handle scales. I tried to keep them consistent with the look, lines, and ‘appointment’ of the Hunter knife and I think I have!
Make sure you line up the front (lower) part of the handle scales with the natural line of the blade bevel – the rest should fall into place well.
Last but not least – I’m totally new to the world of 3D printing and 3D design. This is my first project to ‘give back’ to the community writ large for some really helpful, friendly people that have made 3D printing accessible and enjoyable! Thanks everyone!
Print Settings
Printer:
Creality CR 10 Rafts:
No Supports:
No Resolution:
.2 Infill:
30% Notes:
This is essentially a structural piece for those of you that split your blade in the middle of the handle like I did. So over-engineer it and make it tough! Used tetrahedral infill pattern in Cura for strongk-ness. -
CZS 3D Printer eccentricSpacer wrench 偏心塊板手 3D Print Model
Summary
CZS 3D Printer eccentricSpacer wrench 偏心塊板手 -
VirtualTryOn.fr – Glasses 3D printing – Low Paulie 3D Print Model
Here is a completely printable spectacle frame, made available by https://VirtualTryOn.fr, a web solution that allows opticians to customize frames so that they fit perfectly with the faces of their customers.
-
Folgertech 2020 i3 2004 Discount LCD Display Left Arm Mountable 3D Print Model
Summary
A remix of two other types of mounts. The best display front I have found plus a heavily modified arm to support it from the left side of my i3. Note the pictures provided where it uses two M5’s to mount it quite securely. Also note that the m3x30’s used to mount the screen use two sets of nuts, the first gives almost the perfect clearance for the soldered joints on the back and the latter hold it to the arm.
Print Settings
Printer Brand:
Prusa Printer:
Prusa Clone Rafts:
No Supports:
No Resolution:
300um Infill:
20% with 3 outer layers from 400um nozzle -
TRX-4 Parts 3D Print Model
Summary
Consolidated post of all my TRX-4 Designs. Development thread is http://www.rccrawler.com/forum/traxxas-trx-4/587308-trx-4-development-thread.html#post5729889 -
Nissan Altima Brake Pedal Bumper 3D Print Model
Summary
I Made this in tinkercad to fit a 97 Nissan Altima brake pedal bumper, The replacements are $10 a piece for a rubber version, I printed in pla and is working just fine. -
Bettery Box for Electric skateboard 3D Print Model
Summary
Just a simple box designed to fit on the booton of a curved bottom skateboard and home 2 3s 4500 maH batteries. I’m uploading the solidworks file so you can change the curve to your need -
African Elephant Head – Low Poly 3D Print Model
Summary
Low poly version of a African Elephant’s head, for the low poly lovers and for everyone else.
If you would like to see more of my stuff, you can check my Instragram page here : https://www.instagram.com/ricardo.jfa/
Or my artstation here:https://www.artstation.com/artist/ricardo-jfa
How I Designed This
This one I sculpted in Zbrush a few months ago when I was doing daily sculpts everyday.
I did several animal heads, with this one being the first. -
Cake Forms 3D Model
Template shapes for cakes (heart, split heart, flower and star) with 2 cm high. The heart and the broken heart are 10 cm wide and long, the flower was 10 cm wide and 9.5 cm long and the star was 14.5 cm wide and 13.5 cm long.
-
Cake formes 3D Model
Template shapes for cakes (shooting star, 6-point star, sun and moon) 2 cm high. The shooting star is 10.5 cm wide and 5 cm long, the 6-pointed star is 10 cm wide and 8.9 long, the sun was 9.5 cm wide and 9.5 cm long and The moon was 7 cm wide and 10.5 cm long.
-
Cake forms 3D Model
Model shapes for cakes (bell, cloud, waves, mushroom) with 2 cm high. The bell is 10.5 cm wide and 5 cm long, the waves are 8.2 cm wide and 7.8 in length, the cloud is 7.6 cm wide and 7.9 cm long and the mushroom Is 8.2 cm wide and 8.4 cm long.
-
Hose clip 9 mm 3D Print Model
Achievements of 2 ABS staples to hold the 9 mm car fuel pipes in gauge and proximities
-
GoPro – Helmet Extensor 3D Print Model
Summary
GoPro – Helmet Extensor
Nozzle size – 0.3 mm
Layer height – 0.1 mm
Shell thickness – 0.6 mm
Fill Density – 60%
Bottom/Top thickness – 0.2 mm
Nozzle temp – 240°C (Material: ABS)
Bed temp – 83°C
Speed.
Travel – 150 mm/s
Bottom layer – 40 mm/s
Infill – 65 mm/s
Top/bottom – 40 mm/s
Outer shell – 40 mm/s
Inner shell – 55 mm/s
Support type – Everywhere
Estimated Time – 6 hs
Print Settings
Printer Brand:
Prusa Printer:
Prusa Steel Rafts:
No Supports:
Yes Resolution:
0.1 Infill:
60 -
Headphone Stand – Easy Print 3D Print Model
Summary
Inspired by the cool looking Makerbot Headphone Stand, I have designed this version from the ground up.
It is “waaaay” easier to print and get looking good IMHO.
A little more agressive looking, with more resolved overhangs for better results.
Have fun, enjoy ; )
01-0.3 Resolution (0.2 Good compromise, 0.15 looks excellent)
No supports required
Infill > 10% (15% min recommended)
PLA – Works very well
ABS – Haven’t tried : (
2-3 Shells
3 Bottom Layers
3-4 Top Layers -
Simple Easy Slip-On Organizer 3D Print Model
Summary
This is a slip-on storage bin that does require pinning and gluing together. Pins are provided. The slip-on support is setup for a “1-by” board (3/4″ width). I use it to store my clippers and filament clips so they are readily available.
Print Settings
Printer Brand:
MakerBot Printer:
MakerBot Replicator+ Rafts:
Doesn’t Matter Supports:
No Resolution:
200 microns Infill:
10% Notes:
I use a raft but I am sure the 3D Print Masters will not need one. The STL is set so it will print without supports and it is compact on the build plate. -
Linear Chain – Wire Tabs 3D Print Model
Summary
My Filament kept getting caught on the zip ties… this is my solution! -
Scotch scraper (office gadjet useful work) 3D Print Model
Scotch scraper (office gadjet useful work)
-
Anet A8 Y-Axis belt tensioner with Ø3mm and Ø5mm hole Zahnriemenspanner Umlenkung Y-Achse 3D Print Model
Summary
Neue Umlenkung für den Anet A8, zum Spannen des Zahnriemens, für Zahnriemenscheiben mit Ø5mm Bohrung oder Ø3mm Bohrung. Das zweite Teil muss gespiegelt gedruckt werden.
Attention: The second part must be printed mirrored. -
GR-12L SUMD 20mm x 20mm mount 3D Print Model
Summary
This is a 20mm x 20mm mount for the Graupner GR-12L SUMD receiver. The receiver, when removed from the shrink wrap, slides into the mount, allowing it to be installed at the top of the flight control stack.
Print Settings
Printer:
Monoprice Select Mini Rafts:
No Supports:
No Infill:
50
How I Designed This
Onshape -
Kawaii Flower pot 3D Print Model
Summary
kawaii flower pot moving legs, its a funny decoration 🙂
Print Settings
Printer:
Prusa Mendel i3 Rafts:
No Supports:
No Resolution:
0.2 Infill:
20 Notes:
i made it in PLA and other in ABS
0.8 shell thickness
How I Designed This
Kawaii Flower pot
I made it at solid works
