Summary
This is an hook built to maintain an aluminium tube to use to install a curtain on a Gazebo series Niagara bought from Leroy merlin.
Please, print with ABS or PET-G and not with PLA. I published the sky file so that you can change and edit dimensions
This and other creation on www.buonevacanze.org
Category: 3D Print Models
Premium & 3D Print models ready to be 3d printed. 3D Print Models and Free 3D Print Models are available for download in several formats including .STL, .3DM, .OBJ, .3DS, .DAE, .SKP, .BLEND, .DWG, .DXF, .STEP and much more. If you’re in search of high-quality 3D printed assets, we have a huge library of 3d print models for any of your needs. Also you can visit 3D Models and All 3D Models category.
-
curtain hook for Niagara Gazebo (Leroy Merlin) 3D Print Model
-
Batman Helmet 3D Model
Batman is a fictional superhero appearing in American comic books published by DC Comics. The character was created by artist Bob Kane and writer Bill Finger, and first appeared in Detective Comics #27 (1939). Originally named the “Bat-Man”, the character is also referred to by such epithets as the Caped Crusader, the Dark Knight, and the World’s Greatest Detective.Formats of the model: OBJ,STL,FBX,
-
Batman Helmet and Deadpool Mask Mask Deadpool has four kinds of eyes Eyes replaceable 3D Model
Batman#1Width in centimeters:19Details_units_in:7,48Width in millimeters:190Height in millimeters:394Depth in millimeters:266Batman is a fictional superhero appearing in American comic books published by DC Comics. The character was created by artist Bob Kane and writer Bill Finger, and first appeared in Detective Comics #27 (1939). Originally named the “Bat-Man”, the character is also referred to by such epithets as the Caped Crusader, the Dark Knight, and the World’s Greatest Detective.Formats of the model: OBJ,STL,FBX,Deadpool#2Mask Deadpool has four kinds of eyes. Eyes replaceable.Width in centimeters:18Details_units_in:7,08Width in millimeters:180Height in millimeters:270Depth in millimeters:140Formats of the model: OBJ,STL,FBX,Deadpool (Wade Winston Wilson) is a fictional antihero appearing in American comic books published by Marvel Comics. Created by artist/writer Rob Liefeld and writer Fabian Nicieza, the character first appeared in The New Mutants #98 (cover-dated February 1991). Initially Deadpool was depicted as a supervillain when he made his first appearance in The New Mutants and later in issues of X-Force, but later evolved into his more recognizable antiheroic persona. Deadpool, whose real name is Wade Wilson, is a disfigured and mentally unstable mercenary with the superhuman ability of an accelerated healing factor and physical prowess. The character is known as the “Merc with a Mouth” because of his talkative nature and tendency to break the fourth wall, which is used by writers for humorous effect and running gags
-
EPIC FAIL FIAL fridge magnet 3D Print Model
Miserably failing magnet. Put it on your fridge, door, broken car, printer or your ex-boyfriend’s picture .. what NOT can you use it for?!
-
Cobra ring with ruby 3D Model
Cobra ring with ruby. The high quality of workmanship. Suitable for editing. Created in Zbrush.
-
Suspension skateboard 3D Model
Suspension skateboard. Size 23,15×4.9×4.4 The archive contains the files 3dm, obj, stl.
-
Direct drive extruder for Hypercube 3D Print Model
Summary
remixed to fit the hypercube mount, for the rest of the files use the original’s from the 3D 75 Geared Extruder
Print Settings
Printer:
Hypercube Rafts:
Doesn’t Matter Supports:
Yes -
fidget widget spinner 3D Print Model
Summary
print 1 with the ring, and 5 without
standard print settings -
Wankel motor 3D Print Model
New version of Wankel engine. A small stepper motor is used in the process. Modify the model for your engine.
video : https://youtu.be/4nAKNg1krkY -
Wc pictograma 3D Model
Pictogram of Wc’s corresponding to man, woman man / woman and deficient. It has 8mm of thickness (4mm base and 4mm relief), with 15 cm of height and 15 cm of width. Rounded corners. Simple dolls and direct interpretation.
-
VL53L0X Rage Sensor Enclosure / Box 3D Print Model
Summary
This is a enclosure for a VL53L0X Laser Sensor. I needed it for a Project where I have to mount it on a corner on a Wall, so i also designed a cable tunnel for it.
Printing without support with 0.2 is fine. Better works with 0.1
SketchUp File is free for download. However, this was 2 Days of work, so please be fair.
Have Fun 🙂
Konstantin Pfeiffer
Print Settings
Printer Brand:
Prusa Printer:
Prusa Clone Rafts:
No Supports:
No Resolution:
0.2 Infill:
50 -
Chain piece 3D Print Model
Summary
to use as flexible cable guide, to protect cables to moving parts. -
roman helmet 3D Print Model
Summary
The roman helmet was designed as props for a Xmas drama.
You can attach the feather on your own.
The crest part is detachable by design because there could be different forms of feather depending on the roles: captain, centurion, or average soldier.
Print Settings
Printer:
ATOM 2.5EX Rafts:
Doesn’t Matter Supports:
Yes Resolution:
0.2mm Infill:
10%
Post-PrintingPrepare the axles of 1.6mm and 0.8mm in diameter for joining parts. Transform the paperclips into the axles used by chickpieces.
Join the rear-shell and the neck-guard
Join the front-shell and rear-shell parts.
Join the front-crest and rear-rest. Attach the crest on the helmet with the glue or string (for detachable in the future)
Attach the chickpieces to the helmet with the axles made from the paperclips
-
Sailor spinner 3D Print Model
Summary
The “unconventional” spinner series continues. This time I was inspired by the rudder of the old galleons, which we have seen many times in pirate films.
To reduce the thickness, I used eight 6MA nuts, 10 mm. hexagon, and the bearing is, as usual, the standard skateboard 608, 22 mm in diameter. As always, it is not necessary any glue to hold everything together.
I downloaded two versions: one called “Timone_centrale”, which is much more like a rudder, but needs supports, a bit of post print jobs, and a pretty accurate printer; and a “Timone_centrale_easy” that does not need supports and It prints easily.
The lids and the bearing caps are suitable for both models.
Print Settings
Printer Brand:
FlashForge Printer:
Creator Pro Rafts:
No Supports:
No Resolution:
0,1 Infill:
50% -
Anet A8 Micro SD extend cord holder 3D Print Model
Summary
A simple but effective micro SD extension holder.
Print Settings
Printer:
Anet A8 Rafts:
Doesn’t Matter Supports:
Yes Resolution:
0.2mm Infill:
20% Notes:
Hotend temp : 190 °C
Hotbed temp : 45 °C
Material : PLA (orange)Overview and Background
I’ve designed a very simple holder for a micro sd extension I bought on ebay. It was one like this : http://www.ebay.com/itm/TF-Micro-SD-To-SD-Card-Extension-Cable-Adapter-Flexible-Extender-For-Car-GPS-YG-/112084033724?hash=item1a18baa0bc:g:fTEAAOSwZVlXmDqZ
I know the design is ugly, but at least it works.
Skills Learned
Modeling -
Wc symbol 3D Model
Bathroom symbols (male, female, handicapped, Male / Female). Prepared for 3d printing. Exported to Stl format. And Obj.All objects have a height of 12 cm. All four models have exported five thicknesses (34mm, 6mm, 10mm and 15mm).The man model has 328 vertices, 648 triangles and Width 43,36mmThe woman model has 328 vertices, 648 triangles and Width 52,79mmThe defective model has 728 vertices, 1436 triangles and Width 114,22mmThe male / female model has 345 vertices, 682 triangles and Width 101,84cmmmAltogether with the four models and the respective thicknesses it has 6860 vertices and 13544 triangles.
-
Wc pictogram 3D Model
Pictogram of Wc’s corresponding to man, woman man / woman and deficient. It has 4mm of thickness, with 15 cm of height and 15 cm of width. Rounded corners. Simple dolls and direct interpretation.
-
Uniq ring 3D Model
The ring size is 7(Usa)All information about this ring is mention on the pictures
-
Support for remote controls (TV – Box – etc …) 3D Print Model
1st realization.
Support for 3 remote controls (TV – Box – etc …).
The idea came from a need for the house. Today, with all the electronic devices at our disposal, I had to create a support not for 2 but for 3 remotes !!! -
Wings 3D Model
High poly wings.File contains one mesh object.Measure units are meters.Both wings in position like in presentation has width about 12 cm from right to left.Thickness of one feather is about 1.5 mm.One wing is one manifold mesh.Native format is .blendPresentation consists from cycles renders and screenshots.Files have different titles that means:Wings-high-res (Faces count: 1861176)Wings-middle-res (Faces count: 930588)Wings-low-res (Faces count: 65140)
-
Linkin Park suspension 3D Model
Linkin Park – American rock band from Agoura Hills, California. Formed in 1996, the band rose to international fame with their debut album Hybrid Theory (2000), which was certified Diamond by the RIAA in 2005 and multi-Platinum in several other countries. Their following studio album Meteora continued the band’s success, topping the Billboard 200 album chart in 2003, and was followed by extensive touring and charity work around the world.Formats of the model: OBJ,STL,3Ds.
-
Twisted Hexagon Vase 3D Print Model
Summary
Print this vase in vase mode, I used Slic3r to slice this model and used hatchbox PLA.
Print Settings
Printer Brand:
Prusa Printer:
Prusa Mk2 Rafts:
No Supports:
No Resolution:
.2 mm Infill:
0% Notes:
Print in Vase Mode -
K40 Air and Laser holder 3D Print Model
Summary
Simple clamp for the the K40 laser to hold a laser cross and air nozzle in adjustable brackets. On this model it is for an inflator needle with aquarium tubing for air delivery. The tube will slide into the slot in the
the holder. Use 3:1 adhesive heat shrink to attach the nozzle to the tubing before mounting in the holder. The laser holder is sized for an 8.8mm diameter laser dot or cross.
You will need (3) M3x 12-14mm screws and matching nuts to fit the brackets.
The mounting holes may need clean up work depending on the material used. The clamp is meant to slide up as far as possible when mounting.
Print Settings
Printer:
A8 custom Rafts:
No Supports:
No Resolution:
0.2-0.4 Infill:
65% -
Rippled Vase 3D Print Model
Summary
This is a cool vase that I designed in Fusion 360. I printed it with a .2 mm resolution and in vase mode. I sliced this file with Slic3r and used hatchbox PLA. Happy Printing!
Print Settings
Printer Brand:
Prusa Printer:
Prusa Mk2 Rafts:
No Supports:
No Resolution:
.2 mm Infill:
0% Notes:
Print in Vase mode. -
Toy phone using tactile &Push buttons 3D Print Model
Summary
I remixed the original design to implement tactile buttons and mini push buttons , that way she gets the clicking sound. The buttons are a REALLY tight fit. I had to press them in with the butt end of a screwdriver. But all in all, I accomplished what I wanted. All original design credit goes towards the original creator.
These are the exact ones I used:
Mini push buttons: https://www.amazon.com/gp/product/B008MU0CHQ/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Tactile buttons: https://www.amazon.com/gp/product/B00W0YUV1W/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Print Settings
Rafts:
No Supports:
No Resolution:
.2 Infill:
30-100 Notes:
Do the top and Bottom shells in 30% infill
Do the buttons 100% infill.
If you break a button getting it in, you’ll need a soldering iron to melt the plastic around it to get it out. hat’s what I had to do.
When you download the files, youll notice 6 buttons are smaller, as in, they hare about 1mm shorter, or something similar. those buttons are designed to be used on top of the “push” type button, not the tactile ones. The tactile ones get the thicker buttons.
TACTILE: Star, Heart,Trapezoid, Hexagon, Basket, Flower
PUSH TYPE: Gear, Screw, Square, Circle, Triangle, Diamond -
Warhammer40k/other unit move plate 3D Print Model
Summary
A movement plate for warhammer 40k or other 1in figures.
Work in progress, not yet tried printing myself. Estimate 0,2 should be ok to print with. -
Clip box 3D Print Model
Box with back clip and opening cover.
2 chamfers (front and right side) for easier opening of cover by finger. -
Replacement Pedal For Todlers Tricycle 3D Print Model
I designed a replacement pedal for my kiddos tricycle.
It made a nice training for Fusion 360. -
Toy Roller Compactor 3D Print Model
I haven’s seen a similar toy around so I started a Fusion 360 practice project.
This roller is inspired by Bomag machine which was on duty in our street while road renovation took place. -
Sarah and duck (DUCK) 3D Print Model
Model and print just for fun, model in MODE and 3DS Max, Printed in Makerbot replicator
-
RING STAYLE 3D Model
The ring size is 7(USA)All information about this ring is mention on the picture
-
Wedding Band 3D Model
The ring size is 7 (Usa)All informations about the ring mention on the pictures
-
Ver Carriage 2020 3D Print Model
Summary
I AM NOT ORIGINAL CREATOR! PLEASE PRAISE ORIGINAL CREATOR! SORRY FOR ALL CAPS! 😉 -
Drilcase Lock 3D Print Model
Summary
The lockclips on Bosch cases happen to break after years of use. Therefore I needed a replacement lock for the case of the Bosch SDS Drill. The lock could be used for other things too of course.
Print Settings
Printer Brand:
Prusa Printer:
Prusa Clone Rafts:
No Supports:
Yes Resolution:
0.28mm Infill:
40% Notes:
Supports is only needed for the block when you want to print it in one piece. Read the steps for more information about printing the block without supports.
How I Designed This
Design
I designed this in OnShape but created a sketch with pencil on paper first. Dimensions are based on what I thought should work out.Parts and steps
Pins
To assemble this lock you need to make pins out of 3mm screws, just saw the top off and make a small incision on one side of the pin to be able to screw them into the parts.
Needed for one lock is a four 3mm screws cut-off to a length of two times 6mm and two times 10mm. Blocks
The blocks can be sliced from 7mm for printing without support material. After printing cleanup both parts of the block and apply a tiny bit of glue before assembling. Holes
Drill the holes to 3mm. You need four screws, rings and nuts to mount this onto the case. See the pictures for the endresult.
Make a small incision into the thread-screwThe parts assembled and attached to the case
Move the top over the block
Press the clip down and the lock is shut!
Happy drilling!
-
2016 Suzuki GSX-RR 1:8 Racing RC MotoGP Version 2 3D Print Model
Summary
This is a brand new motorcycle. It builds upon the knowledge gained with my previous bikes, but where those were a proof of concept, this is the final product.
This 1/8 size Racing Motorcycle is far more advanced and has been completely redesigned with knowledge gained from actual RC motorcycle designers and racing enthusiasts whose invaluable input was incorporated into the design. This is not meant to be a good 3d printed RC motorcycle, but a serious new RC Motorcycle variant that people can build, design and race at the track.
Version 2:
Completely redesigned from Version 1, Slimmer Body, Narrower chassis, Center of gravity has been moved back and towards the center of the bike, rear gyro, three piece front rim, and electronics are stored on chassis.
Built and Engineered by:
Brett Turnage
bti3dlabs.com
@3dprintracetech
Assembly Manual: https://drive.google.com/open?id=0By6c8kTN8KnBR2dsVHhZU1k3TUE
Parts List: included in download folder
Instructables build: https://www.instructables.com/id/2016-Suzuki-GSX-RR-18-Racing-RC-MotoGP-Version-2/ -
LOXX Belt Clip Connector 3D Print Model
Summary
A strong and safe attachment solution to keep things attached to your person. This belt look design interfaces with LOXX connectors to allow quick connect and disconnect of everyday carry or larger items such as cameras or belt pouches (eg Leatherman sheath)
See more info here: http://www.makealittlemore.com/2017/07/06/experimenting-with-loxx-fasteners/
The connectors can be bought here: http://www.loxx.shop/en/new/loxx-starter-set-nickel/a-676/
They even supply key chains with a hole for the connector pre-made: http://www.loxx.shop/en/neu/loxx-lifestyle-lederpatch-loxx-blau/a-685/
Print Settings
Printer Brand:
Prusa Printer:
Prusa Mk2 Rafts:
No Supports:
No Resolution:
0.15 Infill:
100% Notes:
make it as strong ass possible!! maybe use ABS. -
Fossil Q stand rotated 3D Print Model
Summary
Simply the same object, rotated by 90-12.556, which seems like it’s the right amount (don’t worry, I didn’t trial and error this number).
Slic3r can’t rotate by a non-integer amount, so making this flat is key for probably many slicers.
Werewolf_fr, feel free to suck in this stl file into your design, and I’ll delete this version. -
Wc symbol 3D Model
Bathroom symbols (male, female, handicapped, Male / Female). Prepared for 3d printing. Exported to Stl format. And Obj.All objects have a height of 12 cm. All four models have exported five thicknesses (3mm, 6mm, 10mm, 15mm and 20mm).The man model has 220 vertices, 432 triangles and Width 43,36mmThe woman model has 220 vertices, 432 triangles and Width 52,79mmThe defective model has 230 vertices, 452 triangles and Width 114,22mmThe male / female model has 488 vertices, 956 triangles and Width 101,84cmmmAltogether with the four models and the respective thicknesses it has 5790 vertices and 11360 triangles.
-
Flower Like Fidget With M10 Nuts 3D Print Model
For the spinner is required standard skate 608 bearing (inner di 8 mm, outer di 22 mm, width 7mm) and 5 M10 nuts.
-
Printable Helicone 3D Print Model
Summary
Helicone is an interactive sculpture by John Edmark (more info). You can buy one on Amazon. By rotating the shaft, the arms can settle into a helix, or a pinecone shape that uses (half of) the Golden Angle to fill out the space completely.
I saw a few videos of it in action and decided I wanted to try to make one. I found a few models online, but they all relied on externally visible notches for stops, which the Helicone does not exhibit. After I came up with my solution, I saw a “making of” video with some screen shots of the laser pattern which indicates that it uses a very similar mechanism.
A video of it working.
You can use the Customizer to change various dimensions and petal shape. If you download the OpenSCAD file, you can also adjust the number of slices and experiment with different functions to change the helix angle and 3D outline.
Post-Printing
Print out two of each slice. The slice number is embossed on the underside of one petal to help keep them organized when you drop them. To assemble, thread all the slices and top and bottom caps onto a 3/16″ dowel, working them around until they spin freely. Glue the bottom cap to the rod (I used a dot of superglue; be careful not to glue any other parts to the rod). You can also glue to the top cap into position if you want to prevent the parts flying off the top. -
45° angle transition pieces 3D Print Model
Summary
A couple different 45° angle transition pieces. I’d figure they’d have their uses. -
Inmoov Original parts all together 3D Print Model
Summary
Just converted 3d Inmoov V1 SketchUp by Mindless Back to Stl so I could easily swap in derivatives to see how they would fit and work. however not all the parts separated properly and as such I marked it as thing in Progress.
****NOTE THIS IS NOT A 3D PRINTABLE MODEL IN ITS CURRENT STATE I JUST CONVERTED IT BACK TO STL TO WORK ON IT IN 3D BUILDER AND BLENDER
All files created by Gael from the inmoov project here www.inmoov.fr
**square block was also found in files by Mindless and added simply for the reason of posting to thingiverse feel free to print it if you wish 🙂 -
FatShark 18650 battery end caps 3D Print Model
Summary
End caps to turn two 18650 batteries (like the famous NCR18650B from Panasonic) into a fatshark-compatible battery that stays in the strap like the original with these “ears” (I don’t know a better word for it) sticking out on both sides of the goggles’ strap.
A parameter in the scad file changes between both caps for your convenience.
I know, in the screenshot I use the “wrong” connector (XT60 instead of barrel) but that is due to a mod of my goggles. -
Anet A8 Remix of Extruder Fan Mod V2 by hadoko 3D Print Model
Summary
I added a slot on the bottom of the front of the front mount, and a tab on the half moon shape fan nozzle to hold it in place.
Print Settings
Printer:
Anet A8 Rafts:
No Supports:
Yes Resolution:
.2 Infill:
10 Notes:
Check out his original mod for instructions. Hardest part is drilling to flush mount the screws.https://www.thingiverse.com/thing:2290361
I added my logo to the front of mine, but the files uploaded I removed it. -
Knight of Egypt 3D Model
Model of a figure of the Knight of the chess set “Princess of Egypt”. There are six figures in the set.I will be very glad to your message about the result of 3D printing.I really love to create chess. Please write which topics of chess sets are of interest to you.Sincerely,Zorum
-
Rook of Egypt 3D Model
Model of a figure of the Rook of the chess set “Princess of Egypt”. There are six figures in the set.I will be very glad to your message about the result of 3D printing.I really love to create chess. Please write which topics of chess sets are of interest to you.Sincerely,Zorum
-
Warrior of Egypt 3D Model
Model of a figure of the Pawn of the chess set “Princess of Egypt”. There are six figures in the set.I will be very glad to your message about the result of 3D printing.I really love to create chess. Please write which topics of chess sets are of interest to you.Sincerely,Zorum
-
Multi-Color Sushi 3D Print Model
Grab a pair of chopsticks (preferably printed with woodfill), mix some wasabi with soy sauce, warm up a bottle of sake, and enjoy a nice evening with this 3D printed, multi-color sushi.
-
Multi-Color Flexible Pliers 3D Print Model
Printed in one piece by Palette+, these flexible pliers were printed with PLA and TPU and shows the functional design possibilities.
-
Duplo Compatible Car Base 2 x 4 3D Print Model
When I printed this nice Jeep https://cults3d.com/en/game/jeep-lego-duplo-brick
I was missing the base for it. -
Multi-Color Winterfell Game of Thrones 3D Print Model
Re-take House Stark by printing this multi-color remix of ice876’s Winterfell model. The model is designed based on the opening sequence of Game of Thrones.
-
Summer Smith gun from Rick and Morty cartoon 3D Print Model
Summer Smith (C-132) gun. Model has a lot of free space inside to add LEDs.
-
Princess of Egypt 3D Model
Model of a figure of the Queen of the chess set “Princess of Egypt”. There are six figures in the set.I will be very glad to your message about the result of 3D printing.I really love to create chess. Please write which topics of chess sets are of interest to you.Sincerely,Zorum
-
Prince of Egypt 3D Model
Model of a figure of the King of the chess set “Princess of Egypt”. There are six figures in the set.I will be very glad to your message about the result of 3D printing.I really love to create chess. Please write which topics of chess sets are of interest to you.Sincerely,Zorum
-
Priest of Egypt 3D Model
Model of a figure of the Bishop of the chess set “Princess of Egypt”. There are six figures in the set.I will be very glad to your message about the result of 3D printing.I really love to create chess. Please write which topics of chess sets are of interest to you.Sincerely,Zorum
-
Small rolling pin stand 3D Print Model
Summary
My wife has a decorative wood rolling pin (who knew such a thing existed?) and wanted a small stand for it. Print two (one for each end) and place under the handle. I suppose it could be used for other things that are able to fit in the 1 inch cutout.
Print Settings
Printer Brand:
Prusa Printer:
Prusa Mk2 Rafts:
No Supports:
Yes Resolution:
.15-.20 Infill:
20% Notes:
Printed with wood filament, but could use anything, obviously. -
Prusa MK2 Haribo 3030 Y Belt Tensioner 3D Print Model
Summary
Adjustable Y Belt Tensioner for the Prusa MK2 Haribo 3030 Edition, I am sure that it will work for other 3030 setups as well. It uses an M2 screw with an M3 square nut that comes with the Prusa kits.
This is based on the original design on Github so I am not sure who to give credit to for the original design.
I place custom supports in the space where the square nut will sit using S3D, not sure if you can print without supports it give it a try.
Print Settings
Printer:
Prusa MK2 Rafts:
No Supports:
Yes Resolution:
.20 – .30 Infill:
20% -
HPD F1 Lexan Body version 3D Print Model
Summary
This is a version of the HPD F1 to use a Lexan Body. Also the front and middle is redesigned. The front is stronger and middle part takes the battery 90 deg rotated.
It is compatible with the rear cradle but there is also a cradle that you build from several parts included, it is not as strong but easier to change individual parts and less waste of plastic when things break. The rear cradle is compatible with the original HPD version but there is also a wide version for this wider body and side_stabs are 2 different versions depending on combinations.
The car was designed to be printed in Nylon like 910 that is slightly rigid. But my prototype I made with prima value PLA did not break so it is very strong with PLA apart from the wings.
The Front wing can use lexan wings or you can bolt on the printed from HPD, fastening points are not ideal but nothing some electrical tape can’t fix 😉 I strongly recommend to print the front wing in Nylon or something with similar flex. Rear wing I have used Bridge Nylon and it flex good and never breaks.
If you want to go cheap or cant find springs, I have used the spring from a ball pen and cut it to shorter length for front. And for rear you can ignore the side springs completely if you just want to go racing and print the plastic main rear spring that is included.
All parts is made in OpenSCAD and source is at github: https://github.com/condac/hpdf1_lexan
Print Settings
Printer:
Home made RepRap style Rafts:
No Supports:
No Resolution:
0.15 or similar Infill:
100% Notes:
All parts are designed to print in 100% infill for strength. -
Heavy Ogr 3D Model
Heavy Ogr 3D print modelModel format*obj *stl *maxFantasy heavy ogr in 28mm ready for printingBattle ogres, are devoid of the main swamp ogres imperfection – they are disciplined and clever against their race typical representatives. It’s no wonder -it is impossible not to discover how to interact with your co-warriors after passing through hundreds of battles, therefore this type of ogre is entrusted to get a sturdy armor and weapons, because of the well-known fact, that heavy ogre never hits anyone from his army.
-
Lannister map marker 3D Print Model
Summary
My reproduction of the House Lannister map marker as seen in A Game of Thrones. -
standard size 12 gauge airsoft shotgun shell 3D Print Model
Summary
This is to help you if you need to create something around a PPS airsoft shotgun shell. These are the standard in the industry. The size are perfect.
No really goal to print this…it’s more for meshmixing -
Mad max sawed off airsoft shotgun shell 3D Print Model
Summary
This it the standard shell that comme with the Mad Max double barrel sawed off shotgun. It includes a 7mm hole. There are no really point to print this one. It’s just for modeling. Size are exact. -
AM8 Lowered Y Tensioner Block 3D Print Model
Summary
This is a Y Tensioner block mod that lowers the tensioner by about 5MM. This was created in response to some people having belt aligment issues because there belt holder considerably lowers the belt position. This also strengthens the Y tensioner so that it can easily be printed horizontal without supports.
Note, I have not tested this. I do not need it for my printer. This is for people that do need it. Let me know if it needs to be changed. -
Lion – Lion’s foot for tables 3D Print Model
A classic element from the rococo style, revisited as a modern accent: the lion’s foot. Lion is an accessory that you can use to personalise coffee table and make it look original.
Lion is designed to fit perfectly to the well-known small IKEA Lack table, but you can fit it to any other type of table simply by drilling holes and fixing the feet with screws. -
Mobile Phone Stand 3D Print Model
As Game of Thrones season 7 is about to start in few days. We have made this stand as a tribute to Jon Snow and Game of Thrones.
-
MOUSE FIGURE 3D Print Model
I present to you different mouse figurines for decorated your interior, ideal for a child room 8 in all
-
Martini Glass 3D Print Model
Summary
This is a cool martini glass design I created! A great way to make this usable is to print it nice and big and spray it with clear spray paint to seal it. I don’t advise drinking out of it unless you know the clear coat you used is food safe. Enjoy! -
Tattu 450mah 4s 75c Lipo Armor 3D Print Model
Summary
Lipo Armor for Tattu 450mah 4s 75c Battery Pack -
Skateboard rear light 3D Print Model
Summary
Rear light for my Mindless Daily Grande.
Utilizes:
2x10cm red LED strip,
1×18650 battery,
1xTP4056 charger,
1xMT3608 step up,
1xbi-stable 8mm button.
Assembly is intuitive, as is soldering,
Will require four 2mm longer M5 bolts to connect with trucks.
Still work in early beta stage.
Print Settings
Printer:
TEVO Tarantula Rafts:
Doesn’t Matter Supports:
Yes Resolution:
0.2 Infill:
20% (still testing) -
Pen Pillow 3D Print Model
What do you do when you’ve been writing or drawing for hours?
You throw your pen and take a break, but … have you ever thought about what your pen suffers? -
Fidget Spinner 3D Print Model
Summary
This is my first attempt at drafting in 123 design.
Print Settings
Printer Brand:
Prusa Printer:
Prusa Mk2 Rafts:
No Supports:
No Notes:
Currently having trouble with first layers.
