***Note this is a digital file (STL printable file) only.
Category: 3D Print Models
Premium & 3D Print models ready to be 3d printed. 3D Print Models and Free 3D Print Models are available for download in several formats including .STL, .3DM, .OBJ, .3DS, .DAE, .SKP, .BLEND, .DWG, .DXF, .STEP and much more. If you’re in search of high-quality 3D printed assets, we have a huge library of 3d print models for any of your needs. Also you can visit 3D Models and All 3D Models category.
-
Hexagonal Succulent Planter 3D Print Model
Summary
Hollow hexagonal planter made with Hatchbox Wood PLA (see Post-Printing section for information on wood stain). After staining, fill with pebbles (I purchased a small bag of pebbles at the local craft store) and a small plant (I purchased a fake succulent plant on Amazon)
Print Settings
Printer Brand:
Prusa Printer:
Prusa Clone Rafts:
No Supports:
No Resolution:
0.2 Infill:
0-10%
Post-Printing
Staining Wood PLA
After printing in Hatchbox wood PLA, I used a “stain marker” to stain the planter (my particular stain marker is a dark walnut stain made by Rust-Oleum). Apply the stain marker in slow, uniform strokes (all strokes in the same direction and that direction should follow the layer lines). By slightly overlapping the strokes, it simulates wood grain and gives the wood a more realistic look. I do NOT sand the wood before staining, because in this particular application I think the layer lines enhance the wood look.
Note, the stain marker I used is 2-in-1 stain + finish (and it’s instant dry)… so it doesn’t rub off and can get wet. If you use a different kind of stain, you may want to finish it with a protective coat so the stain doesn’t rub onto your skin. -
Spiky plant pot 3D Print Model
Summary
This is a plant pot that all plants desire to have. With this pot you can have any plant grow to its fullest. -
Irregular Neopixel matrix 3D Print Model
Summary
Irregular Neopixel matrix constructed from lasercut 4mm MDF, 2mm perspex, paper and 60 pixels/m Neopixel strip. Parametric Openscad design.
Controlled by an Arduino Micro using the Adafruit Neomatrix / Neopixel libraries. -
Parametric Motor Retainer 3D Print Model
Summary
This parametric motor retainer uses the “Poor man’s openscad screw library” found here: https://www.thingiverse.com/thing:8796
The settings in the scad file are adapted to my printer, aside from the dimensions at the top, you may need to adjust the “fudge_factor” setting until you get an appropriate fit on your body tube and a well-functioning thread.
Use this at your own risk, if you do not have sufficient layer adhesion, this part will not retain your motor when the ejection charge goes off. Ensure that your printed part is sufficiently strong before using it in flight! If the threads are too loose, they can slip off the retainer ring, so be sure your thread clearance is tight enough as well. The clearance should be as tight as possible while the threads are still functional.
Note that not all adhesives work well with printed plastics! Be sure you have a strong bond between the retainer ring and the motor mount tube before you use it for flight.
Print Settings
Printer Brand:
SeeMeCNC Printer:
Rostock MAX v2 Rafts:
No Supports:
No Resolution:
0.2 Infill:
N/A Notes:
A resolution of 0.1 mm might produce nicer threads; experiment to find the smoothest working & strongest part your printer is able to produce. -
Game of Thrones Spinner 3D Print Model
The long night is coming and the dead come with it: Jon Snow
A tribute to Game of thrones fans. -
Tevo Tarantula Bed Level Knob WIDE 3D Print Model
Summary
Created this using TinkerCad, inspiration from the CR-10 bed level knob created by Valsrath. I was immediately spoiled by how easy it was to bed level once I had his knobs installed on my machine. Wanted the same experience for my Tevo, hadn’t yet seen anything like this, so I made my own. It’s a tight fit, intentionally, highly recommend removing the bed level nuts and then gently hammer them in place.
Designed this to use minimal amount of filament, but does appear to be plenty strong. I printed this on my CR-10. -
Quadbot 17 3D Print Model
Summary
This is Quadbot 17, a work-in-progress quadruped robot born out of a learning exercise in Autodesk Fusion 360.
This quadruped robot will use AX-12A Dynamixel servos (might be upgraded to the more powerful AX-18A). The legs currently have 20 DoF and there are an additional 2 DoF for the body. Servos and brackets are from the Robotis range, with some replaced by their metal counterparts available from Trossen Robotics. They will be painted to match the colour theme. The rest of the robot is designed with 3D printed parts in mind. The main framework of printed parts forming the body will be sandwiched between 1.6 mm thick custom plates.
The novel aspects of this quadruped are its articulated legs, which have higher DOF than usually found on small quadrupeds, and its articulated “spine”, which will help it in navigating uneven terrain.
A number of options are considered for the “head”, or main sensor pack: an XBOX Kinect v2 time-of-flight sensor, a Scanse Sweep LiDAR and an Intel RealSense depth-sensing camera.
Currently, a hardware test rig of one leg has been built, and the kinematics have been calculated and tested.
How I Designed This
Further information
For news and updates on progress of this robot, visit Cognitive Dissonance. -
Rain Gauge Mount 3D Print Model
Summary
This is a holder for a replaceable rain gauge tube, or odometer. See the photos for the glass replacement tube info. I buy mine at Menards up here in northern USA for about $5.
The holder is a simple plate that allows one to attach it to a railing like on a deck. The first one I made clips to my deck railing, but since most railings are different I created this simple flat one that can be screwed down to any flat surface. The holes are 3mm which works great for #4 sized stainless steel screws.
The calibration ring helps the gauge read correctly. The glass tube is flanged outwards at the top which allows extra water to roll into the tube. This results in readings that can be 30% larger than the actual rain fall. The calibration ring should fit snugly so that water can’t run into the gauge between the glass and the ring. I simply silicone it in place.
Be sure to mount the gauge in a place that has an open view of the sky and is not shadowed by buildings or trees. -
Bagel Slicer 3D Print Model
Summary
This item helps guide the knife through the bagel.
Print Settings
Notes:
I suggest using thick walls and high infill. -
Tronxy x3 Z leadscrew stabilizer bearing support 3D Print Model
Summary
I needed a stabilizer that would house a 16mm bearing, as that is all I had. So I designed these instead of using the 22mm 608z skate bearings. The bearing is a 16x5x8. Enjoy.
Print Settings
Printer:
Tronxy X3 Rafts:
No Supports:
Doesn’t Matter Resolution:
.2 ish Infill:
your liking -
Square micropave ring 3D Model
STL+3DMRING READY TO PROTOTIPATE AND REMOVE MOLD …. RELIABLE FOR PRODUCTION IN SERIES
-
Panel ring-001 3D Model
RING WITH 1MM GEMS READY TO PROTIPATE AND MOLD TO LEAD TO PRODUCTION IN SERIES.ALL SIZE IMPROVEMENT IS FOUND IN PREVIEW IMAGESSTL-OBJ AVAILABLE FORMATS
-
Trubbish 3D Print Model
I’ve thought this guy was cute for awhile, even if it’s “a bag of trash”. He seemed fairly simple to model, so I figured I could give it a whirl to bring it to life!
-
Comfort grips for the Xperia Z2 tablet 3D Print Model
I wanted something to make extended reading sessions with my tablet more pleasant. I don’t really expect there to be a lot of Z2 tablet owners specifically who’d be interested in this but if nothing else, maybe it’ll inspire someone 😉
-
12-Sided Tower Accessory – Bridge Connectors PLUS 3D Print Model
Summary
This is a set of connector walkways and brdige parts to connect 12-Sided Towers at a long distance than the first bridge. It is completely modular and the same heights as the floorsfor the building so it all buiulds off the original.
Enjoy! -
Spangrepen Clamping levers M6 3D Print Model
Summary
A M6 Clamping levers.
Printed in PLA 0.2.
Print layers perpendicular to the screw for more solidity. May be difficult to print
A M6 Clamping levers.
Imprimé en PLA 0.2.
Imprimer de facon a avoir les couches perpendiculaires a la vis pour plus de solidité. -
Holo Projector for R2D2 3D Print Model
Summary
This is the Holo Projector for R2D2. OpenScad Source Code included. -
Mazda 3 Shift Knob 3D Print Model
Summary
My shift knob in my 2007 Mazda 3 broke, so instead of just buying a new one I created my own simple one. The picture shown does not have the knob screwed on all the way, it does go all the way down to the boot.
I was worried about printing this upright and using support, but it worked just great. I have since printed it upright without support so it is whatever you want to do with your specific printer.
The thread on it is M10x1.25, so even though I did this for a Mazda 3 it should fit any shifter that has that thread on it. It was a little hard to twist on, but I prefer that to ensure it won’t come off while driving.
I printed mine with a higher infill than I usually do (35%vs10%), this is because of the force that will be put on the center thread/core while shifting. I wanted give it a little more robustness while driving.
I hope at least one person finds this useful, it is my first upload to Thingiverse. Enjoy.
Print Settings
Printer Brand:
MakerBot Printer:
MakerBot Replicator Rafts:
Doesn’t Matter Supports:
Doesn’t Matter Resolution:
0.25 Infill:
20% + Notes:
Pretty easy print, shouldn’t be a problem. I did mine in ABS because that is what I have. -
2020 Corner Bracket w/nut stop 3D Print Model
Summary
This is a 2020 corner bracket that has a built in stop for square nuts, which makes alignment easier when using them.
Created this because I’m using 8x8mm square nuts for my current d-bot build, and got sick of having issues with lining them up with my corner brackets so I made these to help me out.
Print Settings
Printer:
Custom Rafts:
No Supports:
No Infill:
100 Notes:
Put the face of the bracket on the print bed, and no supports are needed. I print at 100% infill since I’m using PLA and wanted rigidity. -
Heart engagement ring 3D print model 3D Model
Two models.One with sidestones and one without.Eng007All my models are tested and produced.
-
Porte Telephone Crystals By Dantego (SAMSUNG, WIKO, IPHONE …) 3D Print Model
Here is a new door phone model. This one in the theme of Crystals.
It can accommodate a Samsung, Wiko, Iphone or any other phone / smartphone (or even a book if printed in a big enough size)
The support has a very solid base that avoids a possible reversal.
A size of 8.5 cm high may be sufficient for many phone models. Moreover, printing with phosphorescent filament can give an excellent rendering! -
Rea anchor and spinnaker for Sun Odyssey 32i 3D Print Model
Boat front pulley for anchor and spinnaker.
-
Multi-Color Toronto City Hall 3D Print Model
3D printing can create some highly accurate and beautiful architectural models. We decided to highlight one of our local landmarks here in our great city by modeling and printing a scale model of Toronto’s City Hall.
-
sleeping kitten 3D Print Model
3D printed “sleeping kitten -light-“.
This is also the lantern by covering the LED light.
An easy way is to put onto the flashlight of mobile phone (ex. iPhone). -
Punch Card 3D Print Model
Summary
Made this punch card. It says something specific for a retiree, so I uploaded the SketchUp file in case you want to change the message. -
Medical bottle cap and syringe support 3D Print Model
Summary
First Useful thing printed.
Liquid medic bottle cap with syringe support. This cap fit and screw on the bottle neck over rubber reducer adapter for syringe that fit in the bottle neck. You can keep the adapter in place and seal the bottle with this cap. Plus, you have a outer reduced diameter groove to snap the syringe support. Hence, not loosing the … syringe anymore… 😉
I dont know the model of the supplied bottle of my pharmacy store but probably a very common model in Canada and in the US.
Cap must be printed upside down off course!
Enjoy!
Print Settings
Printer:
Tevo Tarantula XL Rafts:
No Supports:
No Resolution:
0.2 Infill:
20% -
16x16mm to 20x20mm ESC/Flight Controller Adapter 3D Print Model
Summary
Used to mount a 16x16mm nano ESC or Flight controller on a frame that supports 20x20mm boards.
Best printed on ABS wtih 100% infill
For the 20x20mm holes, you will need to use thread using a M3x0.5 tap. For the 16×16, you can either thread using a M2x.04 tap or enlarge to use a M2 screw.
Print Settings
Printer Brand:
FlashForge Printer:
Creator Pro Rafts:
No Supports:
No Resolution:
.2mm Infill:
100 -
QAV210 grommet 3D Print Model
Summary
I didn’t feel like buying these so I made a model to replace the QAV210 quad copter frame grommet that holds the battery lead.
I made this with NinjaFlex, but any TPU is recommended. -
DIAMOND RING GOLD 18K 3D Model
Artisan handcrafted jewelry with fashion design.Martirial: 18K Yellow Gold Plated or 18K White Gold Plated with diamond or gemstone.Ring size: 17.3 mmGemstone:DiamondMakes a wonderful gift for any occasion.Designed by Mr.TimEmail: mrtim0106@gmail.com
-
DIAMOND RING GOLD 18K 3D Model
Artisan handcrafted jewelry with fashion design.Martirial: 18K Yellow Gold Plated or 18K White Gold Plated with diamond or gemstone.Ring size: 17.3 mmGemstone:DiamondMakes a wonderful gift for any occasion.Designed by Mr.TimEmail: mrtim0106@gmail.com
-
DIAMOND RING GOLD 18K 3D Model
Artisan handcrafted jewelry with fashion design.Martirial: 18K Yellow Gold Plated or 18K White Gold Plated with diamond or gemstone.Ring size: 17.3 mmGemstone:DiamondMakes a wonderful gift for any occasion.Designed by Mr.TimEmail: mrtim0106@gmail.com
-
GOLD 18K DIAMOND RING 3D Model
Artisan handcrafted jewelry with fashion design.Martirial: 18K Yellow Gold Plated or 18K White Gold Plated with diamond or gemstone.Ring size: 17.3 mmGemstone:DiamondMakes a wonderful gift for any occasion.Designed by Mr.TimEmail: mrtim0106@gmail.com
-
GOLD 18K DIAMOND RING 3D Model
Artisan handcrafted jewelry with fashion design.Martirial: 18K Yellow Gold Plated or 18K White Gold Plated with diamond or gemstone.Ring size: 17.3 mmGemstone:DiamondMakes a wonderful gift for any occasion.Designed by Mr.TimEmail: mrtim0106@gmail.com
-
GOLD 18K DIAMOND RING 3D Model
Artisan handcrafted jewelry with fashion design.Martirial: 18K Yellow Gold Plated or 18K White Gold Plated with diamond or gemstone.Ring size: 17.3 mmGemstone:DiamondMakes a wonderful gift for any occasion.Designed by Mr.TimEmail: mrtim0106@gmail.com
-
GOLD 18K DIAMOND RING 3D Model
Artisan handcrafted jewelry with fashion design.Martirial: 18K Yellow Gold Plated or 18K White Gold Plated with diamond or gemstone.Ring size: 17.3 mmGemstone:DiamondMakes a wonderful gift for any occasion.Designed by Mr.TimEmail: mrtim0106@gmail.com
-
GOLD 18K DIAMOND RING 3D Model
Artisan handcrafted jewelry with fashion design.Martirial: 18K Yellow Gold Plated or 18K White Gold Plated with diamond or gemstone.Ring size: 17.3 mmGemstone:DiamondMakes a wonderful gift for any occasion.Designed by Mr.TimEmail: mrtim0106@gmail.com
-
Sapphire Diamond Gold 18K Big Ring 3D Model
Artisan handcrafted jewelry with fashion design.Martirial: 18K Yellow Gold Plated or 18K White Gold Plated with diamond or gemstone.Ring size: 17.3 mmGemstone:Diamond, SapphireMakes a wonderful gift for any occasion.Designed by Mr.TimEmail: mrtim0106@gmail.com
-
DIAMOND RING GOLD 18K 3D Model
Artisan handcrafted jewelry with fashion design.Martirial: 18K Yellow Gold Plated or 18K White Gold Plated with diamond or gemstone.Ring size: 17.3 mmGemstone:DiamondMakes a wonderful gift for any occasion.Designed by Mr.TimEmail: mrtim0106@gmail.com
-
DIAMOND RING GOLD 18K 3D Model
Artisan handcrafted jewelry with fashion design.Martirial: 18K Yellow Gold Plated or 18K White Gold Plated with diamond or gemstone.Ring size: 17.3 mmGemstone:DiamondMakes a wonderful gift for any occasion.Designed by Mr.TimEmail: mrtim0106@gmail.com
-
Butterfly knife trainning 3D Model
Butterfly knife for trainingwell-regulatedSecure and safelength open : 230 mmlength close : 139 mmwidth : 25 mmthickness : 12 mm
-
Love Spinner 3D Print Model
Summary
Designed as a Present for my Girlfriend.
(I have a ceramic bearing in there, and its spinning very nice) -
10mm Punch and Die set spacer 3D Print Model
Summary
This is a spacer for a 10mm die set. Used to create a floating die for compaction in both downward and upward directions. -
S800 Reptile 2G4 VTX Cover 3D Print Model
Summary
Just a quick mod of my VTX cover to incorporate the 2.4 VTX I’m planning on adding in rev 2. Shows off the VTX nicely and give access to all the dip switches. I plan on using hot glue or similar to mount the VTX, currently not sure how hot it will get for the hot glue but hopefully should be fine. -
HS1177 or Micro FPV Cam Mount – 30.5 mm spacing 5mm standoff 3D Print Model
Summary
This mount will work for either an hs1177 or a micro fpv cam -
D-BOT – ALUMINUM CORNERS – MGN12H 3D Print Model
Summary
Do not print at this time. Still working on files.
Decided to redo the C-Bot/D-Bot files as I wanted to sturdy the frame with aluminum corner pieces. This allows room for the aluminum pieces to hold the frame together while the motor and idler ends are attached to the frame, hopefully keeping the printed pieces from strain. It gets to 120 degrees where I’m at and I planned on moving this around from time to time, so I wanted to build it as sturdy as possible. At the moment, all pieces are cut from misumi with the standard D-Bot build dimensions and a 2020 piece instead of a 2040 for the x gantry. -
Wooden carved board for backgammon THE GODS OF SEAS POSEIDON 3D Model
this Board is for backgammon can also be used as decorative panels for interior decoration. Ready to cut by CNC router machine
-
Wooden carved board for backgammon THE GODS OF THE SEAS Aphrodite 3D Model
this Board is for backgammon can also be used as decorative panels for interior decoration. ready to cut by CNC router machine
-
Decorating plate “DEDSEC” 3D Print Model
This decorating plate with “DEDSEC” write on it, is a realy simple 3D model to test your printing machine and improve yourself.
-
Automatic barrier 3D Print Model
Here is the realization of a model of parking barrier functioning with an ARDUINO UNO card, a connection GROVE and the possibility to be ordered by a smartphone or a tablet via Bluetooth with a very small budget.
-
GOLD RING 18K EMERALD 3D Model
Artisan handcrafted jewelry with fashion design.Martirial: 18K Yellow Gold Plated with diamond or gemstone.Ring size: 17.3 mmGemstone:EmeraldMakes a wonderful gift for any occasion.Designed by Mr.Tim
-
GOLD RING 18K RUBY 3D Model
Artisan handcrafted jewelry with fashion design.Martirial: 18K Yellow Gold Plated with diamond or gemstone.Ring size: 17.3 mmGemstone:RubyMakes a wonderful gift for any occasion.Designed by Mr.Tim
-
DIAMOND GOLD 18K RING 3D Model
Artisan handcrafted jewelry with fashion design.Martirial: 18K Yellow Gold Plated or 18K White Gold Plated with diamond or gemstone.Ring size: 17.3 mmGemstone:DiamondMakes a wonderful gift for any occasion.Designed by Mr.TimEmail: mrtim0106@gmail.com
-
DIAMOND GOLD 18K RING 3D Model
Artisan handcrafted jewelry with fashion design.Martirial: 18K Yellow Gold Plated or 18K White Gold Plated with diamond or gemstone.Ring size: 17.3 mmGemstone:DiamondMakes a wonderful gift for any occasion.Designed by Mr.TimEmail: mrtim0106@gmail.com
-
GOLD 18K DIAMOND RING 3D Model
Artisan handcrafted jewelry with fashion design.Martirial: 18K Yellow Gold Plated or 18K White Gold Plated with diamond or gemstone.Ring size: 17.3 mmGemstone:DiamondMakes a wonderful gift for any occasion.Designed by Mr.TimEmail: mrtim0106@gmail.com
-
DIAMOND RING WHITE GOLD 18K 3D Model
Artisan handcrafted jewelry with fashion design.Martirial: 18K White Gold Plated with diamond or gemstone.Ring size: 17.3 mmGemstone:DiamondMakes a wonderful gift for any occasion.Designed by Mr.TimEmail: mrtim0106@gmail.com
-
DIAMOND GOLD 18K RING 3D Model
Artisan handcrafted jewelry with fashion design.Martirial: 18K Yellow Gold Plated or 18K White Gold Plated with diamond or gemstone.Ring size: 17.3 mmGemstone:DiamondMakes a wonderful gift for any occasion.Designed by Mr.TimEmail: mrtim0106@gmail.com
-
GOLD 18K DIAMOND RING 3D Model
Artisan handcrafted jewelry with fashion design.Martirial: 18K Yellow Gold Plated or 18K White Gold Plated with diamond or gemstone.Ring size: 17.3 mmGemstone:DiamondMakes a wonderful gift for any occasion.Designed by Mr.TimEmail: mrtim0106@gmail.com
-
Lego Battle Droid Leg – Replacement 3D Print Model
Summary
For all those who have lost or broken your battle droid leg(s). I give you a replacement design. This fits a standard Lego Battle Droid torso. You can also use it to start making your own version of Roger Freemaker.
Made on the M3D micro with ABS-R
Print Settings
Printer:
M3D Micro Rafts:
Yes Supports:
No Resolution:
150 Notes:
Works good with ABS-R -
Articulated and Parted MWO Catapult 3D Print Model
Summary
i am bad at summary and english…
Note 1) Smaller revoloute Joints that did’t given specific Pin Model use 1.75mm Fillaments as pin.
Note 2) Revolute Axiess given 0.05mm toleance and other assmble joints given no tolerance in design so you will need some accuracy fit part together.
Note 3) you may need glue to weld part together which it will need when weld smaller parts on body
Note 4) Some joints and attach points may need put some a bit of tissue for comensate tolerance in order to keep tension on joints.
Note 6) if you want change scale i recommand you load Introduction STL on your editer whatever you use and edit then extract one by one if possible
Note 7) this modification work may completed but it will stay in ‘This Thing is a Work-In-Progress’ untill anyone proven this can be printed well in other printers especially Reprep which i afriad it may can not printed well with my supports.
Print Settings
Printer:
Cubicon Style (3DP-210F) Rafts:
Doesn’t Matter Supports:
Doesn’t Matter Resolution:
i recommend 0.1mm Layers height Infill:
10~15% Notes:
you will need to be good at get accurate Dimension of work of your printer as put male and female part together in 0.05mm toleance or no toleance on attach points
How I Designed This
I liked Mech and ship angled nicely such as UNSC ship , Catapult Mech, Raven Mech and i also interest in developing and covert models into articulated one so i work on this as fun. -
Vanishing Coin Accessory 3D Print Model
Summary
This is an accessory for the Magic Makers Vanishing Coin Trick. This is a replacement for the plastic ring that comes with the set.
The trick is cool. And can be bought here https://www.amazon.com/Magic-Makers-Vanishing-Coin-Ultimate/dp/B00TYP4QKC. However my plastic ring broke, making the trick worthless. I didn’t want to pay another $30 for a silly stepped plastic ring when I have a 3D printer, thus I give you a five cent replacement. Good as new or even better than the original!
Print Settings
Printer:
M3D Micro Rafts:
Doesn’t Matter Supports:
No Resolution:
any -
Eisenhower Dollar Coin Holder 3D Print Model
Summary
Remix of Dollar Coin Holder, scaled for Eisenhower Dollar Coins -
GOLD RING 18K SHAPPHIRE 3D Model
Artisan handcrafted jewelry with fashion design.Martirial: 18K Yellow Gold Plated with diamond or gemstone.Ring size: 17.3 mmGemstone:SapphireMakes a wonderful gift for any occasion.Designed by Mr.Tim
-
GOLD RING 18K RUBY 3D Model
Artisan handcrafted jewelry with fashion design.Martirial: 18K Yellow Gold Plated with diamond or gemstone.Ring size: 17.3 mmGemstone:RubyMakes a wonderful gift for any occasion.Designed by Mr.Tim
-
Sami2 3D Model
ring size : 58ring weight (18k gold) : ~ 10gr8 marquise (4*2*1.1)38 marquise (5*2.5*1.4)
-
Lotus 56B Turbine Formula 1 3D Print Model
This is a scale model of the beautiful Lotus 56B Turbine Formula 1 racing car. The model is in 1/24 scale and has been designed to be printed with a 0.4 nozzle and 0.15 layer height. You could also scale it up or down to get other scales, if you are going for smaller scale i would recommend 0.3 nozzle and 0.1 layer height to get the details of the model.
