File format:3Ds,OBJ,STL.
Category: 3D Print Models
Premium & 3D Print models ready to be 3d printed. 3D Print Models and Free 3D Print Models are available for download in several formats including .STL, .3DM, .OBJ, .3DS, .DAE, .SKP, .BLEND, .DWG, .DXF, .STEP and much more. If you’re in search of high-quality 3D printed assets, we have a huge library of 3d print models for any of your needs. Also you can visit 3D Models and All 3D Models category.
-
Arms Robot 3D Model
Excellent robotic arm controlled by arduinoStepper motor nema 17Stepper motor 28BYJ48Bearing 608Bearing 625*** ONLY .STL FILES ***without arduino programming.
-
Communicator Belt Holster 3D Print Model
Summary
The Star Trek TOS communicator made by The Wand Company is a great prop replica. The only downside to it is you can’t put Velcro on the back and wear it like they did in the show. They were nice enough to give you a pouch to put it in, but that just provides some protection if you pocket carry it. I like to use mine to listen to podcasts while puttering around the house. The speaker is not super loud so putting it in a pocket also means I won’t be able to hear it.
I decided to create a holster that could be worn on the belt that would capture the feel of the way the communicator is meant to be worn. This holster leaves the front of the communicator unobstructed so I can get the maximum sound from the speaker.
To make the holster you will need 2 neodymium magnets ½” x 1/8” disc shaped. I used M12x18DI from Apex Magnets. Also, you will need some black peel and stick felt which you can get at any craft store.
You need to 3D print the main holster. I print mine with the flat side on the print bed and with support type set to everywhere and fill amount at 10% (cura). This provides support for the bottom lip that keeps the communicator from falling. You will probably have to do some filing to smooth down the areas where the supports printed. Once that is done, super glue the 2 magnets into the holes in the holster. Note: determine the proper polarity of the magnets first by sticking them to the back of the communicator and make sure you glue them in the right way. Once the glue is dry cut a piece of felt and place it over the back to hide the magnets and keep the communicator from getting scratched.
Next you need a belt clip. I did not feel the need to re-invent the wheel on this, as there are a number of belt clips available on Thingiverse. I used this one: https://www.thingiverse.com/thing:35940 Maybe you are a serious cosplayer and already have a uniform with pants that has Velcro on it. I guess you could skip the belt clip and put Velcro on the back to attach the holster directly to your pants.
There are a couple of things you could also do if you are so inclined. The only element missing now is the Velcro rip sound when you remove the communicator. You could put a small piece of Velcro on the communicator near the top, high enough so it won’t interfere with the recharging base. Then you would get the appropriate Velcro sound when you call for that emergency beam up.
Print Settings
Printer:
Maker Select
Supports:
Yes
Resolution:
0.1
Infill:
50%
Notes:
My support setting in Cura is set to 10% for this print. -
MPCNC chain mount 3D Print Model
Summary
USE Open_Cable_Chain to connecthttps://www.thingiverse.com/thing:611593 -
Legion scale Tie Fighter 3D Print Model
Summary
Legion scale (1:48) version of the Tie Interceptor version of the model by Astrofossil.
Please note that this is set up as non-derivative so I cannot add it as a remix but he has given his ok to publish. This is an remix of https://www.thingiverse.com/thing:2256033 -
Pegboard Socket Holders 3D Print Model
Summary
Tired of all your socket sets being in a box and not on your pegboard and easily available?
Yeah… me too.
For STANDARD PEGBOARD (25.4mm / 1inch BETWEEN HOLES + 6mm holes)
Takes 1/4inch sockets, 3/8ths inch sockets and 1/2inch sockets.
Angled upwards for ease of supporting heavy sockets and to prevent those suckers falling off…
Enjoy.
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Clone
Rafts:
Yes
Supports:
Yes
Resolution:
0.2 works fine for me.
Infill:
60% works fine for me.
Notes:
ALL my prints are in ABS because I only make actual working parts, not busts of Yoda…
My ABS was printed at 225degC with the bed at 45degC.
Raft typically takes out the imperfections in my print bed but print the ABS as you see fit and as works for you.
How I Designed This
Designed in Fusion360.
I find them very useful and easier to access than having them in a box have to root through every time I want to use them.
Fusion360 file included so you can see how the shape was created, which is often the best way to learn. -
Pi Zero Cam 3D Print Model
Summary
batteru : https://amzn.to/2HlLKfH
Charger : https://amzn.to/2vAn2qi
Print Settings
Printer:
D-Bot CoreXY
Rafts:
Doesn’t Matter
Supports:
Doesn’t Matter
Resolution:
0.2mm
Infill:
25% -
Galea Mens ring 3D Model
Designed to be cast in bronzeSize: int. diam.: 20mmget the real thing here: http://plasmeo3d.com/en/galea-mens-ring-in-bronze/
-
Nerf Barrel Attachment 3D Print Model
Summary
This is a custom 3D printable Nerf-compatible barrel attachment. It’s a 3-piece design so you can very easily customize the colors. All the parts need to be epoxied together. If anything doesn’t fit well, try scaling one or more of the parts by several percent to adjust the fitment. You’ll need to print my “locking ring” in addition to secure this to a Nerf Blaster (see below).
My hope is that people use this barrel attachment as an example of how to use my locking ring to make custom Nerf barrel attachments. All the hard stuff is in the locking ring which makes a custom barrel very easy to design & build. I hope to get people sharing more of their cool custom attachments to spread around the online community.
The “base” part needs to be printed with support, the “middle” and “top” parts do not need support.
In order to attach this to a Nerf blaster you’ll need to print a locking ring from here: https://www.thingiverse.com/thing:2910094
I’ve included the IGS files for most of the parts in case anyone wants to modify them, add features, etc so they can further customize this design. Just post anything you share as a remix so others can more easily find it.
This is my first Nerf-related donation to the free 3D printing pool. I have other cool designs I offer for sale on my Etsy Shop: https://www.etsy.com/shop/AM34Designs -
WilderRig-PopSinker 3D Print Model
Summary
It got it name because it act as a POPPER and can dive with a steady retrieve and hold its depth rising slowly. Like the Mini-Bite with the treble hook dressed it moves though thin weeds very well.
I print with a 2 part file stopping at the point I want to drop the BB’s in, but you can use the one file, pause the print, add your weight and continue that’s up to you.
It has a through hole to either add your wire or line and hook if that’s your preference. It has an air chamber in the top half and a belly chamber for up to 3 BB’s. Depending on the amount of infill and BB’s you use will determined how it sinks/floats.
I use different color PLA and a Sharpie maker to give it some life and as you can see in Pics it at-least fools the fish.
Good Luck and “GO GET SOME FISH!!!”
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
10 to 15%
Notes:
I go at least 4 to 5 top and bottom for durability with 2 to 3 shells. Eyes socket size I think are 8mm x8mm. -
Conair Hair Dryer Nozzle Adapter 3D Print Model
Summary
The nozzle for my Conair Infinity Pro hair dryer has 2 broken tabs. With only one holding tab and 3 other non-holding tabs left, the nozzle does not stay on to the dryer. This adapter fits snugly with the original nozzle and the hair dryer without having to glue it for me. It is printed with the ABS and recommended with other high temp filaments only. The print time for the 0.2 mm layer height, 30% infill will take about 30~60 min, depending on your speed settings.
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
30%
Notes:
Rotate 90 degree and print with the tabs on top. Due to the hair dryer’s high temperature, it is recommended using only with the ABS and other high temperature filaments. -
MK3 style X-motor end for MK2(S) 3D Print Model
Summary
Added the mount for the endstop onto the MK3 X-motor end to fit MK2(S)
Use MK3 X-idler end in conjunction with this design.
Helps alleviate belt rubbing, twisting at the idler end AND easier belt tension adjustment.
You will need (4) 3x18mm for the trapezoidal nuts as the mounts are thicker. -
Winter Soldier Combat Mask 3D Print Model
Summary
This Thing is a break apart of the Winter Soldier mask by Jace1969 to fit on my print bed. I broke each part (mask and goggles) into half and then half again. -
Skull with swords on a shield 3D Model
A model of the cover or a keychain with a stylized skull and swords
-
Star Wars Legion Terrain – Lothal Merchant Crates (Rebels) 3D Print Model
Summary
Two different sized crates based on those seen on Lothal in the TV series Star Wars Rebels. Not entirely sure what they’re for, but they were in the market scenes on Lothal, hence the name “Lothal Merchant Crate”. Multiple crates can be combined to create a makeshift barricades or just for scenery, and the larger crate can be oriented vertically or horizontally to offer heavy cover to trooper units (I think).
The miniature used for scale IS NOT MINE, all credit for the trooper model goes to sablebadger, who remixed dutchmogul’s model to make it legion compatable.
Star Wars Legion – Scale Model Dummy (sablebadger): https://www.thingiverse.com/thing:2859230
Sgt. Scalesby, the Miniature Scaling Dummy (ducthmogul): https://www.thingiverse.com/thing:1465372
Comments are encouraged, and I ask that you please post your makes (in action on the tabletop if possible).
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
No
Resolution:
0.12mm
Infill:
10
Notes:
The design is optimized for a 0.40mm or 0.20mm nozzle, and 0.12mm layer height.
I also recommend using 4+ top layers to reduce gaps in the top surface. -
Filament Spool axis adapter 3D Print Model
Summary
Filament spool adapter for M8 type axis.
The part is optimized, it consume only 2m of 1.75 filament.
The adapters must be tight against the spool using the nuts and washers on the shaft. The axis rotates with the roller on the support.
The Solidworks file is provided to enable customization.
Print Settings
Printer:
ANET A8
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20%
Notes:
Consumed: 1910mm of 1.75 PLA
Print time: 20 min -
Compact 90 straight and cross for 15×15/OpenBeam/Makerbeam XL 3D Print Model
Summary
This is a compact 90 degree brace for Openbeam/Makerbeam XL 15×15 extrusion. There are two versions – one is a straight 90, the other is a very handy 90 degree rotated variant so you can do crossovers. The crossover version is pictured in the as-built photo.
A couple of things make this design different than the numerous other corner braces out there. This one has channel grooves to keep the part stable, which makes for a really nice, sturdy brace. I also did countersunk holes to make for a nice clean installation.
You do need to print this with supports but cleanup isn’t bad.
Print Settings
Printer Brand:
LulzBot
Printer:
Mini
Rafts:
No
Supports:
Yes
Resolution:
Any. I did 0.3mm
Infill:
20%
Notes:
Supports are required. Rotate the part so it sits flat. -
Wemos D1 Box (reminder Box) 3D Print Model
Summary
I made 2 fittings for screws for my Reminder box, made by Andreas.
Additionally i made a better fitting for the wemos D1, see photos.
Made with PETG – Filament from eSun: https://amzn.to/2wCj297
I am using this box for my BME 680 Sensor:Fhem: Air-Qualitysensor BME 680 – Temperatur – Luftfeuchte – Luftdruck über MQTT getestet
Print Settings
Printer Brand:
Ultimaker
Printer:
Ultimaker 2
Rafts:
Yes
Supports:
No
Resolution:
0.4
Infill:
100% -
Orge Head 3D Model
Orge HeadzBrush ZTL and STL file including all subtools.all parts has subdivision levels.can be used for 3D Printing and educational purposes.
-
Set from Three Solitaire Ring 3D print model 3D Model
Eight 3D print models engagement solitaire rings round.All rings size: 16.51mm.All models is ready for 3D Printing.Center stone:0.05 carat – 2.50 mm.0.10 carat – 3.00 mm.0.15 carat – 3.40 mm.
-
Solitaire rings Collection 3D print model 3D Model
Eight 3D print models engagement solitaire rings round.All rings size: 16.51mm.All models is ready for 3D Printing.Center stone:0.05 carat – 2.50 mm.0.10 carat – 3.00 mm.0.17 carat – 3.50 mm.0.25 carat – 4.00 mm.0.35 carat – 4.50 mm.You have questions? Write to me.
-
Classical Halo Ring 3D print model 3D Model
Classical Halo Ring 3D print modelRing size: 16.51mmModel is ready for 3D Printing.Center stone – Round 1,00carat – 6,50mm x 6,50mm.Side stones – 18 Round by 0,02carat 1,75mm x 1,75mm – 0,36 carat.Halo stones – 20 Round by 0,01 carat 1,25mm x 1,25mm – 0,2 carat.Total weight diamond – 1,56 carat.Weight of metal on photo.You have questions? Write to me.
-
Three Stone Ring 3D print model 3D Model
3D print model three stone ring.Ring size: 16.51mm.Model is ready for 3D Printing.Center stone – Emerald 1,75 carat 8mm x 6mm.Side stones – Two oval by 0,5 carat 6mm x 4mm.Total weight – 2,75 carat.Weight of metal on photo.You have questions? Write to me.
-
Engagement Pave Ring 3D print model 3D Model
3D print models engagement pave ring round.Rings size: 16.51mm.Model is ready for 3D Printing.Center stone: 0.5 carat – 5.00mm x 5.00mm.Side stones – 20 round by 0,01 carat 1,25mm x 1,25mm.Total weight of side stones – 0,2 carat.Total weight of stones – 0,7 carat.Weight of metal on photo.You have questions? Write to me.
-
Heart Pave Ring 3D print model 3D Model
3D print models heart pave ring heart.Rings size: 16.51mm.Model is ready for 3D Printing.Center stone: Heart 0.44 carat – 5.00mm x 5.00mm.Side stones – 20 round by 0,01 carat 1,25mm x 1,25mm.Total weight of side stones – 0,2 carat.Total weight of stones – 0,64 carat.Weight of metal on photo.You have questions? Write to me.
-
#1 Mom Cookie Cutter 3D Print Model
Summary
Make your mother happy with a sweet gift – a Mother’s Day cookie in her honor! Using regular sugar cookie dough, roll it out to about 1/2 inch, then use this cutter to cut out. Two similar designs. Enjoy!
Print Settings
Printer:
Monoprice Maker Select V2
Rafts:
Doesn’t Matter
Supports:
No
Infill:
20-30% is adequate
Notes:
Should use food-safe filament, and wash well and de-burr to remove any tiny loose filament. Remember that if you’re using regular PLA, hand wash in soapy water, not too hot, and do NOT wash in a dishwasher that uses hot water, heats water, or has a heated dry setting. I use MakerGeeks Raptor PLA and PETG for cookie cutters (can use ABS, but I don’t print with it at all). -
Lee Hardness Tester Peg Board Holder 3D Print Model
Summary
I customized https://www.thingiverse.com/thing:537516 to create a pegboard holder for the Lee Precision Hardness Tester.
Also included is a lens cap for the microscope.
The opening for the pressure die is sized for a Hornady Lock-N-Load die bushing, but it should work without the die bushing (though it will be loose).
If anybody is interested in the OpenSCAD files I will post them here.
Lee Precision Hardness Tester: https://amzn.to/2KWLRjT
Hornady Lock-N-Load Bushings:https://amzn.to/2HBnVRS (10)https://amzn.to/2qAi7Qe (3)https://amzn.to/2GZ7AcC (2)
Print Settings
Printer:
i3 “dolly” clone
Rafts:
Doesn’t Matter
Supports:
Doesn’t Matter
Resolution:
.2mm
Infill:
20%
Notes:
I usually print these successfully without supports, brim, or rafts. -
APC UPS Button Assembly 3D Print Model
Summary
This is a replacement off/on/test button for APC UPS units.
You need to print the STL which contains two parts. Install them into the front panel of the UPS back to back and reinstall the PCB. -
TronXY X3 Z Axis Motor 3D Print Model
Summary
the first time i built my printer, i hated how much unnecessary time i spent puting the Z motors.. everything was loose or not in perfect alignment. Then i found Lexa’s one and i loved it, except for one thing.. i had to screw the piece first and then the motor, which for me, was troublesome or unconfortable, so I created this piece which has the scew holes outside, so.. if you t-nut wasnt placed correctly you can fix it without too much trouble.
TL;DR; the screw holes are outside from the motor case so you can put the motor or the screws in whatever order you want.
YOU WILL NEED:
3x m4 screws (i used only the 2 from the original ones, one on top and one on the side)
3x m4 nuts (t-nut or else)
Print Settings
Printer:
Ttronxy x3
Rafts:
Doesn’t Matter
Supports:
No
Resolution:
0.2
Infill:
20%
Notes:
im so sorry, but the ideal print way is as in the first picture and, ideally, with a fan, since i kept modifying the file, i found it was better to just fix the position in the slicer rather than in Fusion 360 -
Sitting Bull 3D printable portrait sculpture 3D Model
Portrait sculpture of Thathanka Iyotake (Sitting Bull). He was Hunkpapa Lakota leader and medicine man. He lead Native American confederation army in victory against US army at Battle of the Little Bighorn.Included in pack:-OBJ files of Sitting Bull. One with feathers and one without feathers. In case you don’t want feathers for any reason.-Stl files of Sitting Bull. One hollow with 1.1 mm shell and 10 mm hole at the bottom of the stand. Bout STL files are 120 mm height.Browse my store to see more of my work.I’m freelance digital sculptor and happily accept custom work. If you like my work, and would love to have custom work made for you, feel free to contact me.
-
Set of masks of Spider-Man Deadpool Deathstroke Black Panther RUINER Red Hood 3D Model
Set of masks of Spider-Man, Deadpool, Deathstroke.Black Panther, RUINER, Red Hood for 3D printing. 7 in 1By buying this product you save $ 15File format:3Ds,OBJ,STL,FBX.1) Deadpool Mask 3D print modelModel information:Deadpool Mask, has interchangeable eyes with facial expressions.File format: OBJ,STL,FBX.Deadpool (Wade Winston Wilson) is a fictional character appearing in American comic books published by Marvel Comics. Created by writer Fabian Nicieza and artist/writer Rob Liefeld, the character first appeared in The New Mutants #98 (cover-dated February 1991). Initially Deadpool was depicted as a supervillain when he made his first appearance in The New Mutants and later in issues of X-Force, but later evolved into his more recognizable antiheroic persona. Deadpool, whose real name is Wade Wilson, is a disfigured and deeply disturbed mercenary and assassin with the superhuman ability of an accelerated healing factor and physical prowess. The character is known as the “Merc with a Mouth” because of his tendency to joke constantly, including his proclivity for breaking the fourth wall, a literary device used by the writers for humorous effect and running gags.2) Black Panther Helmet v1 3D print modelFile format:3Ds,OBJ,STL.Black Panther is a fictional superhero appearing in American comic books published by Marvel Comics. The character was created by writer-editor Stan Lee and writer-artist Jack Kirby, first appearing in Fantastic Four #52 (cover-dated July 1966) in the Silver Age of Comic Books. Black Panther’s real name is T’Challa, king and protector of the fictional African nation of Wakanda. Along with possessing enhanced abilities achieved through ancient Wakandan rituals of drinking the heart shaped herb, T’Challa also relies on his proficiency in science, rigorous physical training, hand-to-hand combat skills, and access to wealth and advanced technology to combat his enemies.Black Panther is the first superhero of African descent in mainstream American comics, having debuted years before early African American superheroes such as Marvel Comics’ the Falcon (1969), Luke Cage (1972) and Blade (1973), or DC Comics’ John Stewart in the role of Green Lantern (1971). In one comic book storyline, the Black Panther mantle is handled by Kasper Cole, a multiracial New York City police officer. Beginning as an impersonator, Cole would later take on the moniker of White Tiger and become an ally to T’Challa. The role of Black Panther and leadership of Wakanda is also given to T’Challa’s sister Shuri for a time when he is left recovering from critical injuries.Black Panther has made numerous appearances in various television shows, animated films and video games. The character is portrayed in live action by Chadwick Boseman in the 2016 film Captain America: Civil War, and the 2018 film Black Panther, set in the Marvel Cinematic Universe. In 2011, Black Panther was ranked 51st overall on IGN’s “Top 100 Comic Books Heroes” list.3)Spider-Man Mask v1 3D print modelSpider-Man Mask v1The mask has removable eyesFile format: 3Ds,OBJ,STL.Spider-Man is a fictional superhero appearing in American comic books published by Marvel Comics. The character was created by writer-editor Stan Lee and writer-artist Steve Ditko, and first appeared in the anthology comic book Amazing Fantasy #15 (August 1962) in the Silver Age of Comic Books. The character is conceived as an orphan within the Marvel Universe named Peter Parker being raised by his Aunt May and Uncle Ben in New York City after his parents Richard and Mary Parker were killed in a plane crash. Lee and Ditko depicted the character as having to deal with the normal struggles of adolescence and financial issues with a large array of supporting characters such as J. Jonah Jameson, Daily Bugle editor and smear campaigner of Spider-Man and classmates such as Flash Thompson, Harry Osborn and romantic interests, Gwen Stacy and Mary Jane Watson. His origin story depicts him as being bitten by a radioactive spider and thus acquiring spider-related power and abilities, such as the ability to cling to most surfaces, shoot spider-webs using wrist-mounted devices of his own invention, which he calls “web-shooters”, and react to danger quickly with his “spider-sense”, enabling him to combat his many superpowered foes, such as Doctor Octopus, Green Goblin and Venom. Also within the origin story, Spider-Man originally uses this power for stardom, but after letting a burglar escape who is responsible for shooting his uncle, he learns to use his power responsibly.4)Spider-Man Mask v2 3D print modelSpider-Man Mask v2The mask has removable eyesFile format: 3Ds,OBJ,STL.Spider-Man is a fictional superhero appearing in American comic books published by Marvel Comics. The character was created by writer-editor Stan Lee and writer-artist Steve Ditko, and first appeared in the anthology comic book Amazing Fantasy #15 (August 1962) in the Silver Age of Comic Books. The character is conceived as an orphan within the Marvel Universe named Peter Parker being raised by his Aunt May and Uncle Ben in New York City after his parents Richard and Mary Parker were killed in a plane crash. Lee and Ditko depicted the character as having to deal with the normal struggles of adolescence and financial issues with a large array of supporting characters such as J. Jonah Jameson, Daily Bugle editor and smear campaigner of Spider-Man and classmates such as Flash Thompson, Harry Osborn and romantic interests, Gwen Stacy and Mary Jane Watson. His origin story depicts him as being bitten by a radioactive spider and thus acquiring spider-related power and abilities, such as the ability to cling to most surfaces, shoot spider-webs using wrist-mounted devices of his own invention, which he calls “web-shooters”, and react to danger quickly with his “spider-sense”, enabling him to combat his many superpowered foes, such as Doctor Octopus, Green Goblin and Venom. Also within the origin story, Spider-Man originally uses this power for stardom, but after letting a burglar escape who is responsible for shooting his uncle, he learns to use his power responsibly.5)Deathstroke Helmet for printing on a 3d printerFile format: STL,OBJ,3Ds,FBX.Deathstroke (Slade Joseph Wilson) is a fictional supervillain appearing in American comic books published by DC Comics. Created by Marv Wolfman and George Pérez, the character first appeared in The New Teen Titans #2 (December 1980). Deathstroke has been ranked as the 24th Greatest Villain of All Time by Wizard magazine and as the 32nd Greatest Comic Book Villain of All Time by IGN.Deathstroke is a mercenary and assassin who serves as the archenemy of the Teen Titans, though writers have developed him over the years as an adversary of other superheroes in the DC Universe as well, such as Batman and Green Arrow. The character has been substantially adapted from the comics into multiple forms of media, including several Batman-related projects and the Teen Titans animated series. He has been portrayed in live-action by Manu Bennett on The CW’s television series Arrow, and by Joe Manganiello in the DC Extended Universe, beginning with a cameo in the 2017 film Justice League.6)Red Hood Helmet 3D print modelRed Hood Helmet printing 3D modelFormat file: 3Ds,OBJ,STL.The Red Hood is an alias used by multiple fictional characters and a criminal organization appearing in American comic books published by DC Comics. Jason Tdod is the most widely known version of the incarnation, and he assumes the Red Hood identity in the main DC Comics continuity.7)Helmet RUINER 3D print modelHelmet RUINER for 3D printing.File format: 3Ds,OBJ,STL.Ruiner is a shooter game played from an overhead perspective. The game takes place in 2091 and is set in a cyberpunk metropolis known as Rengkok. The player takes control of a silent, masked protagonist who attempts to rescue their kidnapped brother from a failing conglomerate, known as Heaven, that controls Rengkok.
-
3D Printable Building 11 Free 3D Model
Hi!Here we got awesome 3D printable model of building.Yes simple, but realistic looking.You can use it in:-Architectural projects-Science purposes-Educational projects-Just for funEvery model has:-Optimized decimated topology-Slightly curvrd edges
-
3D Printable Building 12 Free 3D Model
Hi!Here we got awesome 3D printable model of building.Yes simple, but realistic looking.You can use it in:-Architectural projects-Science purposes-Educational projects-Just for fun
-
3D Printable Building 13 Free 3D Model
Hi!Here we got awesome 3D printable model of building.Yes simple, but realistic looking.You can use it in:-Architectural projects-Science purposes-Educational projects-Just for funEvery model has:-Optimized decimated topology-Slightly curvrd edges
-
3D Printable Building 14 Free 3D Model
Hi!Here we got awesome 3D printable model of building.Yes simple, but realistic looking.You can use it in:-Architectural projects-Science purposes-Educational projects-Just for funEvery model has:-Optimized decimated topology-Slightly curvrd edges
-
Cool Zombie 3D Model
zBrush ZTL and STL file including all subtools.all parts has subdivision levels.can be used for 3D Printing and educational purposes.
-
HTC VIVE – TPCAST CABLE CLIP FRONT 3D Print Model
Summary
I wanted to arrange all front cables used by TPCAST on my vive. Now they are all alligned and do fit perfectedly. Also no further risk of connection lost.
Print Settings
Printer:
Anycubic I3 Mega
Rafts:
No
Supports:
No
Resolution:
0.2
Notes:
PLA, ~ 8 minutes print time -
Tripple Succ 3D Print Model
Summary
This is my first succulent planter that I’ve made. Not sure why the model is on it’s side, but just rotate it in your slicer.
The modele is really big so I recommend scaling it down to ~50% but YMMV. Mine pictured above was at 30% and I’d say that’s too small.
I tried to implement a base and water holes for healthier plants. I also added a circular riser so it can actually drain.
Feel free to remix or whatever.
Happy printing!
Print Settings
Printer Brand:
MK3
Printer:
Prusa i3
Rafts:
No
Supports:
No
Resolution:
1.5
Infill:
15
Notes:
Infill doesn’t need to be high. Scale down the model, you will see how large it is if you actually try to print. If you do print, post a pic and what scale/resolution you printed at! -
Valance Clip 3D Print Model
Summary
This is a valance clip I made to replace one we broke adjusting the blinds. -
Exercise Gym Bra and Panties hook 3D Print Model
Summary
As far back as I can remember, every girlfriend I’ve ever had has had the habit of hanging their bras and panties on my exercise equipment. When I complained about it, they would always say something like “Well, you never use it!”.
Anyway, so I got this idea: Why not make a bra and panties hook that looks like exercise equipment? I mean it just seems like women would naturally gravitate towards using it for that express purpose.
Print Settings
Printer Brand:
Robo 3D
Printer:
C2 R2
Rafts:
No
Supports:
Yes
Resolution:
Fast (0.2mm)
Infill:
15%
Notes:
This thing needs a lot of support material so you might want to set your support density to 5 to 10% for easier clean-up.
Post-Printing
Mounting on the wall
Just hang it on the wall using the mounting hole in the back.
How I Designed This
Credit goes to….
I got the exercise gym model here:
https://free3d.com/3d-model/big-gym-1571.html
The wall mount I got here:
https://www.thingiverse.com/thing:387890
Thanks Geoffro
I put them all together with TinkerCAD -
Set of masks of Spider-Man Deadpool Deathstroke Black Panther RUINER Red Hood 3D Model
Set of masks of Spider-Man,Deadpool,Deathstroke,Black Panther, RUINER, Red Hood for printing on a 3d printer. (7 in 1)When you purchase this kit, you save $ 15File format:3Ds,OBJ,STL,FBX.Deadpool Mask 3D print modelModel information:Deadpool Mask, has interchangeable eyes with facial expressions.File format: OBJ,STL,FBX.Deadpool (Wade Winston Wilson) is a fictional character appearing in American comic books published by Marvel Comics. Created by writer Fabian Nicieza and artist/writer Rob Liefeld, the character first appeared in The New Mutants #98 (cover-dated February 1991). Initially Deadpool was depicted as a supervillain when he made his first appearance in The New Mutants and later in issues of X-Force, but later evolved into his more recognizable antiheroic persona. Deadpool, whose real name is Wade Wilson, is a disfigured and deeply disturbed mercenary and assassin with the superhuman ability of an accelerated healing factor and physical prowess. The character is known as the “Merc with a Mouth” because of his tendency to joke constantly, including his proclivity for breaking the fourth wall, a literary device used by the writers for humorous effect and running gags.Spider-Man Mask v1 3D print modelSpider-Man Mask v1The mask has removable eyesFile format: 3Ds,OBJ,STL.Spider-Man is a fictional superhero appearing in American comic books published by Marvel Comics. The character was created by writer-editor Stan Lee and writer-artist Steve Ditko, and first appeared in the anthology comic book Amazing Fantasy #15 (August 1962) in the Silver Age of Comic Books. The character is conceived as an orphan within the Marvel Universe named Peter Parker being raised by his Aunt May and Uncle Ben in New York City after his parents Richard and Mary Parker were killed in a plane crash. Lee and Ditko depicted the character as having to deal with the normal struggles of adolescence and financial issues with a large array of supporting characters such as J. Jonah Jameson, Daily Bugle editor and smear campaigner of Spider-Man and classmates such as Flash Thompson, Harry Osborn and romantic interests, Gwen Stacy and Mary Jane Watson. His origin story depicts him as being bitten by a radioactive spider and thus acquiring spider-related power and abilities, such as the ability to cling to most surfaces, shoot spider-webs using wrist-mounted devices of his own invention, which he calls “web-shooters”, and react to danger quickly with his “spider-sense”, enabling him to combat his many superpowered foes, such as Doctor Octopus, Green Goblin and Venom. Also within the origin story, Spider-Man originally uses this power for stardom, but after letting a burglar escape who is responsible for shooting his uncle, he learns to use his power responsibly.Spider-Man Mask v2 3D print modelSpider-Man Mask v2The mask has removable eyesFile format: 3Ds,OBJ,STL.Deathstroke Helmet for printing on a 3d printerFile format: STL,OBJ,3Ds,FBX.Deathstroke (Slade Joseph Wilson) is a fictional supervillain appearing in American comic books published by DC Comics. Created by Marv Wolfman and George Pérez, the character first appeared in The New Teen Titans #2 (December 1980). Deathstroke has been ranked as the 24th Greatest Villain of All Time by Wizard magazine and as the 32nd Greatest Comic Book Villain of All Time by IGN.Deathstroke is a mercenary and assassin who serves as the archenemy of the Teen Titans, though writers have developed him over the years as an adversary of other superheroes in the DC Universe as well, such as Batman and Green Arrow. The character has been substantially adapted from the comics into multiple forms of media, including several Batman-related projects and the Teen Titans animated series. He has been portrayed in live-action by Manu Bennett on The CW’s television series Arrow, and by Joe Manganiello in the DC Extended Universe, beginning with a cameo in the 2017 film Justice League.Helmet RUINER 3D print modelHelmet RUINER for 3D printing.File format: 3Ds,OBJ,STL.Ruiner is a shooter game played from an overhead perspective. The game takes place in 2091 and is set in a cyberpunk metropolis known as Rengkok. The player takes control of a silent, masked protagonist who attempts to rescue their kidnapped brother from a failing conglomerate, known as Heaven, that controls Rengkok.Black Panther Helmet v1 3D print modelFile format:3Ds,OBJ,STL.Black Panther is a fictional superhero appearing in American comic books published by Marvel Comics. The character was created by writer-editor Stan Lee and writer-artist Jack Kirby, first appearing in Fantastic Four #52 (cover-dated July 1966) in the Silver Age of Comic Books. Black Panther’s real name is T’Challa, king and protector of the fictional African nation of Wakanda. Along with possessing enhanced abilities achieved through ancient Wakandan rituals of drinking the heart shaped herb, T’Challa also relies on his proficiency in science, rigorous physical training, hand-to-hand combat skills, and access to wealth and advanced technology to combat his enemies.Black Panther is the first superhero of African descent in mainstream American comics, having debuted years before early African American superheroes such as Marvel Comics’ the Falcon (1969), Luke Cage (1972) and Blade (1973), or DC Comics’ John Stewart in the role of Green Lantern (1971). In one comic book storyline, the Black Panther mantle is handled by Kasper Cole, a multiracial New York City police officer. Beginning as an impersonator, Cole would later take on the moniker of White Tiger and become an ally to T’Challa. The role of Black Panther and leadership of Wakanda is also given to T’Challa’s sister Shuri for a time when he is left recovering from critical injuries.Black Panther has made numerous appearances in various television shows, animated films and video games. The character is portrayed in live action by Chadwick Boseman in the 2016 film Captain America: Civil War, and the 2018 film Black Panther, set in the Marvel Cinematic Universe. In 2011, Black Panther was ranked 51st overall on IGN’s “Top 100 Comic Books Heroes” list.Red Hood Helmet 3D print modelRed Hood Helmet printing 3D modelFormat file: 3Ds,OBJ,STL.The Red Hood is an alias used by multiple fictional characters and a criminal organization appearing in American comic books published by DC Comics. Jason Tdod is the most widely known version of the incarnation, and he assumes the Red Hood identity in the main DC Comics continuity.
-
Esqueleto 3D Print Model
Summary
Esqueleto miniatura, ideal llavero, espejo del auto, etc.
Print Settings
Printer Brand:
RepRap
Printer:
Prusa I3 Rework
Rafts:
No
Supports:
No -
Spinosaurus Emerging from Sea 3D Print Model
Summary
The large Spinosaur dinosaur emerges from the sea after eating his share of fish and looking for other prey. His left claws are just starting to show.
Spinosaurus was among the largest of all known carnivorous dinosaurs, nearly as large as or even larger than Tyrannosaurus or the less familiar Giganotosaurus. Scientists believe it lived on land and in the sea eating both aquatic and terrestrial prey. Best known for his sail fins and arms similar to the Tyrannosaurus with sharp claws.
Piece is designed to be placed in a sea campaign as if emerging to attack or discover your players.
The sea surrounding the dinosaur can be found here for printing.https://www.thingiverse.com/thing:2902642
Print Settings
Printer Brand:
PowerSpec
Printer:
PowerSpec 3D Pro
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
15% -
2 Vape Pen Holder 3D Print Model
Summary
When 1 vape just is not enough. Mix flavors get baked! 3 pen holder coming soon. -
SLIK 618-330 Tripod Plate – Parametric 3D Print Model
Summary
I designed this plate for my SLIK PRO 340DX Tripod with a SLIK SH-705E 3-way head.
The part number is: SLIK 618-330
Print Settings
Printer Brand:
3D Systems
Printer:
Cube 3
Rafts:
No
Supports:
Yes -
Parametric 4-post mounting plate for symmetrical circuit boards 3D Print Model
Summary
I’ve made enough 1-off designs for specific boards to motivate me into designing a fully parametric mounting plate. The included .stl file is for a Raspberry Pi with 6mm magnets as the mounting method, but you could use screws or glue just as well. The .f3d file can quickly generate similar mounting plates for other symmetrical 4-mounting-point circuit boards.
Print Settings
Printer:
creality cr-10
Rafts:
Doesn’t Matter
Supports:
No
Resolution:
.16
Infill:
25%
Notes:
MakerGeeks pro-HTPLA, 235C.
Post-Printing
The example print uses CA glue to secure 6mm magnets as the mounting method. -
Two fingers 9mm bullet belt ring 3D Model
size: 60 x 2get the real thing here: http://plasmeo3d.com/en/two-finger-ring-9mm-bullet-belt-in-brass/
-
ITEM-THING W/ HOLES 3D Print Model
Summary
ITEM-THING W/ HOLES
Print Settings
Printer:
MP SELECT MINI
Rafts:
Doesn’t Matter
Supports:
Yes
Resolution:
0.001
Infill:
NOHow I Designed This
IDK PLUS AUTOCAD -
customisable miniature base plate 3D Print Model
Summary
customisable miniature base.
option to include an indentation as well as a slot.
parameters to print multiple copies too. -
Kayak Bungee cord clip 3D Print Model
Summary
This is a model similar to the bungee clips (not sure what they are really called, feel free to correct me) that come on my sundolphin kayak.
Included models with and without supports. -
Zootrope du 19ième siècle – Activité éducative 3D Print Model
Summary
Le zootrope est l’un des premiers instruments d’animation. Il a ravi les enfants et les adultes à la fin du 19e siècle. La présente activité permettra aux élèves de construire leur propre zootrope et de créer leur propre bande d’images pour zootrope.Overview and Background
Objectifs d’apprentissage
Cette activité permettra aux élèves de :
i) Apprendre comment un zootrope crée une impression de mouvement au moyen d’une série d’images fixes;
ii) Donner libre cours à leur imagination afin de créer une bande pour zootrope.
Informations supplémentaires
Le zootrope est l’un des premiers instruments d’animation. Inventé en 1834 par William George Horner, il a d’abord été appelé « daedalum » ou « roue du diable ». Il n’est devenu vraiment populaire que vers 1867, lorsque William F. Lincoln, aux États Unis, et Milton Bradley, en Angleterre, l’ont redécouvert et fait breveter. C’est Lincoln qui l’a nommé « zootrope » ou « roue de la vie ». L’invention d’appareils d’animation plus perfectionnés, comme le praxinoscope, et l’avènement du cinéma et de la télévision ont entraîné un important déclin de l’intérêt pour le zootrope. Aujourd’hui, on trouve rarement des zootropes dans les foyers, bien que certains artistes et animateurs-graphistes continuent d’en utiliser.
Remarque : L’image 3D originale de l’artefact porte le nom « zootrope-artefact.stl ». Le zootrope est conçu pour être visualisé dans un environnement virtuel au moyen d’un logiciel. Vous pouvez tenter de l’imprimer. Toutefois, nous ne pouvons garantir la qualité de l’impression. Nous avons modifié le modèle afin de le rendre plus facile à utiliser (« zootrope-base-modifié.stl » et « zootrope-support-modifié.stl »). Vous utiliserez ces fichiers dans cette activité.
Pour un complément d’information et des autres activités éducatives sur les zootropes, visitez le sitehttps://ingeniumcanada.org/ingenium/musees/educatif/zootrope-3D.php
Vous trouverez nos conditions d’utilisation à l’adresse https://ingeniumcanada.org/ingenium/doc/content/cstmc/CSTMC%20terms%20of%20use%203D%20FR.pdf
Lesson Plan and Activity
Bande d’images pour zootrope
Pour cette activité vous utiliserez les modèles que vous pouvez trouver sur cette page. Le modèle que vous choisirez dépend de l’âge des élèves. Dans le cas des élèves les plus jeunes, vous pouvez utiliser le modèle de bande avec images, sur lequel les élèves n’ont qu’à ajouter la bouche à un visage. Nous avons inclus un exemple de ce qui peut être dessiné. Dans le cas des élèves les plus âgés, vous pouvez utiliser le modèle de bande vierge sur lequel les élèves peuvent dessiner les images qu’ils veulent.
1) Demandez aux élèves de planifier ce qu’ils veulent dessiner dans chacune des sections de la bande. Il peut être utile de leur faire esquisser les idées qu’ils ont en tête sur du papier brouillon avant de faire des dessins sur la bande. Vous pouvez leur donner les conseils généraux suivants :
i. Optez pour la simplicité.
ii. Commencez et terminez la bande avec des dessins semblables, pour que la séquence d’images soit continue lorsque le zootrope tournera (c’est ce qu’on appelle une « animation en boucle »).
2) En suivant les lignes pointillées, découpez le modèle de bande vierge ou avec le
modèle de bande avec images.
3) Demandez aux élèves de dessiner la séquence d’images qu’ils ont planifiée sur leur bande d’image. Si vous utilisez le modèle de bande vierge, laissez environ 1,2 cm d’espace au bas pour que la base ne perturbe pas l’animation.
4) Pour utiliser ces nouvelles bandes, les élèves vont devoir fabriquer un zootrope en suivant les instructions ci-dessous.
Fabrication d’un zootrope
Pour cette activité, les noms suivants seront utilisés (Image 1 dans l’écran de visionnement).
Fabrication du tambour
1) En suivant les lignes pointillées du modèle, découpez l’un des tambours de zootrope. Si votre imprimante ne permet pas d’impression bord à bord, prolongez le haut et le bas du tambour pour que les bords du papier soient les bords du tambour (comme on le voit dans le document en format PDF).
2) Formez un cylindre en fixant un côté du tambour à l’autre côté. Pour obtenir le meilleur résultat possible, faites chevaucher les bords sur environ 2 mm.
Fabrication des bandes d’images
1) Transformez la bande en cylindre en fixant une extrémité à l’autre extrémité. La section en gris à une extrémité d’une bande peut chevaucher l’autre extrémité. Si votre imprimante ne peut faire d’impression bord à bord, utilisez la marge du papier pour remplacer la section en gris.
Fabrication du zootrope
1) Placez le stylo dans le support. Assurez-vous que le stylo pointe vers le haut et que la pointe dépasse d’au moins 4 cm le sommet du support (Image 2 dans l’écran de visionnement).
2) Insérez le bas du tambour dans les rainures aux extrémités des bras de la base (Image 3 dans l’écran de visionnement).
3) Placez la bande cylindrique à l’intérieur du tambour. Pour obtenir de meilleurs résultats, assurez-vous que chaque image se trouve directement en face d’une fente du tambour (Image 4 dans l’écran de visionnement).
4) Insérez l’ensemble formé de la base, du tambour et de la bande sur le support avec stylo.
5) Le zootrope est prêt à être utilisé (Image 5 dans l’écran de visionnement).
L’animation que le zootrope produit repose sur la « persistance de la
vision ». Ce phénomène est le suivant : quand on cesse de regarder un objet, le cerveau en conserve l’image pendant environ 1/30 de seconde. Lorsqu’on regarde une image à travers les fentes d’un zootrope, le cerveau retient cette image jusqu’à l’apparition de l’image suivante, ce qui donne l’impression que la première image se « déplace » jusqu’à l’image suivante. Les fentes sont importantes, car elles limitent le temps d’observation de chaque image. Sans elles, les images en rotation deviendraient floues.
Materials Needed
1 – Ensemble tridimensionnel de parties du zootrope (« zootrope-base-modifié.stl » et « zootrope-support-modifié.stl »)
1 – Modèle imprimé de tambour de zootrope^
1 – Ciseaux
1 – Imprimé d’un modèle de bande vierge ou d’un modèle de bande avec images^
1 – Ruban adhésif
1 – Stylo (les stylos BIC ® fonctionnent bien)
Crayons, craies de cire (ou autres fournitures pour dessiner)
^ Remarque : Imprimez le modèle de tambour sur un carton de format tabloïd (279 mm x 432 mm ou 11 po x 17 po). Imprimez les autres modèles sur une feuille de format tabloïd. N’imprimez pas à l’échelle du papier : assurez-vous que l’impression est à une échelle de 100 %. Si possible, faites en sorte que les modèles soient imprimées bord à bord. -
Footballer 02 PowerStand 01 STL 3D Model
Footballer 02 PowerStand 01 STL 3D print model3d printable model of the footballer similar to Ronaldo player.Model has near 180mm height.2 Millions 3mf checked for errors and repared.10 Millions obj included and can be used to add some details.See details in netfabb analisys preview picture.Not for macro renders
-
3D Printable Generic Buildings Pack 3D Model
Pack of 10 3D Printable buildingsArchive icludes:Awesome Printable model(s) – 10-High Quality 3D Printable model-Slightly Curved Edges-Decimated Topology
-
Generic City Building 10 3D Model
Archive icludes:Awesome Printable model(s) – 1-High Quality 3D Printable model-Slightly Curved Edges-Decimated Topology
-
Generic City Building 10 3D Model
Archive icludes:Awesome Printable model(s) – 1-High Quality 3D Printable model-Slightly Curved Edges-Decimated Topology
-
Generic City Building 09 3D Model
Archive icludes:Awesome Printable model(s) – 1-High Quality 3D Printable model-Slightly Curved Edges-Decimated Topology
-
Generic City Building 08 3D Model
Archive icludes:Awesome Printable model(s) – 1-High Quality 3D Printable model-Slightly Curved Edges-Decimated Topology
-
Witcher Female 3D Model
Female Witcher SculptzBrush ZTL file including all subtools.all parts has subdivision levels.You want to use 3D Printing and Educational purposes.
-
15W Stereo Amplifier Case 3D Print Model
Summary
This is a case to a 15W audio amplifier board that can be found on eBay, AliExpress, … such as https://www.aliexpress.com/store/product/Hot-Sale-1pc-TDA7297-Version-B-2-15W-Digital-For-Audio-Amplifier-Board-Dual-Channel-AC/1959068_32666077241.html?spm=2114.12010615.0.0.7a894502EdjFEn . I use this amplifier for an Asus Tinker Board.
You will also need a mini toggle switch, a barrel power jack and a 1/8″ stereo jack and some 22 gauge wire. The hole for the power jack is 8.25 mm. The hole for the audio jack is 6.25 mm.
The board is held in the case with one 8 mm, M3 screw on the front. Since the screws in the back are difficult to reach, using 20 mm, M3 screws help. Then with tweezers, it is possible to put the nut on top of the screw. The heads of the screws are on the bottom of the case. -
Ikea Trådfri Motion Sensor Corner Mount 3D Print Model
Summary
Ikea Trådfri Motion Sensor Corner Mount
This is a simple wall edge/corner mount for the Ikea Trådfri Motion sensor.
I recommend using double-sided adhesive tape for mounting on the wall as well as attaching the motion sensor plate.
There’s two versions – a regular version and a version with a 5° skew in case you want to hang it at an angle. -
Marblevator, Mechanisms 3D Print Model
Summary
“Marblevator, Mechanisms” is the latest in my Marblevator series of marble machines. My fascination with gears, mechanisms, marble machines and history formed my inspiration for this model.
A video of Marblevator, Mechanisms in action is here: https://www.youtube.com/watch?v=bl2-R0jftvw.
The model incorporates two antique mechanisms; a “Peaucellier–Lipkin” straight line mechanism (vintage 1864), and a “Whitworth” quick return mechanism (vintage 1800’s) that, when combined as they are in this design, provide a straight line slow ascent, and a straight line rapid descent. In this model, these combined functions are use to slowly raise a bucket containing a marble (an 8mm ball bearing) to the top of a short, built in, track, dump the marble onto the track, rapidly lower the bucket to pick up the marble at the bottom of the track, and then repeat the process.
I’ve included a sketch illustrating the method I used to compute the bar lengths for the straight line mechanism. If you have any questions about the illustration leave a comment and I’ll do my best to answer.
As usual, I probably forgot a file or two or who knows what else, so if you have any questions, please do not hesitate to ask as I do make mistakes in plenty.
Designed using Autodesk Fusion 360, sliced using Cura 3.3.1 and printed in PLA on both an Ultimaker 2+ Extended and an Ultimaker 3 Extended.How I Printed and Assembled Marblevator, Mechanisms.
Purchase, Print and Prepare the Parts.
Marblevator, Mechanisms requires a 300 rpm gear motor (33x12mm 300RPM Metal Mini DC 6V Gearbox Gearwheel Motor Mini Reduce Speed Geared Electric Motor), a 1.5 vdc power supply, and an 8mm (3/8″) ball bearing.
I printed “Bucket.stl” with .1mm layer height and 100% infill. I printed the remaining parts at .15mm layer height with 15% infill. I printed two “Bolt, 4.2mm shoulder.stl”, four “Bolt, 8.4mm shoulder.stl”, four “Arm, DB.stl” and one each of the remaining parts.
Prior to starting assembly, test fit and trim, file, sand, etc. all parts as necessary for smooth movement of moving surfaces, and tight fit for non moving surfaces. Depending on the colors you chose and your printer settings, more or less trimming, filing and/or sanding may be required. Carefully file all edges that contacted the build plate to make absolutely sure that all build plate “ooze” is removed and that all edges are smooth. I used small jewelers files and plenty of patience to perform this step.
Marblevator, Mechanisms uses threaded assembly, thus a tap and die set ((M4 by 0.7, M6 by 1) may be required for thread cleaning.
Assemble the Upper Arm (Arm CD).Position the first “Arm, DB.stl” onto “Arm, CD.stl” as shown.
Position the second “Arm, DB.stl” onto the first as shown.
Secure the three arms together with the first “Bolt, 8.4mm shoulder.stl” as shown.
This is the upper arm assembly.
Assemble the Lower Arm (Arm CE).
Position the third “Arm, DB.stl” onto “Arm, CE.stl” as shown.
Position the fourth “Arm, DB.stl” onto the third as shown.
Secure the three arms together with the second “Bolt, 8.4mm shoulder.stl”.
This is the lower arm assembly.
Assemble the Mechanisms.
Position the upper and lower arms together as shown, then position “Bucket.stl” into position as shown and secure the bucket and arms together using the third “Bolt, 8.4mm shoulder.stl”
Secure the remaining two arms together by positioning “Arm, Wheel.stl” as shown then secure the arms together using the fourth “Bolt, 8.4mm shoulder.stl as shown.
This is the mechanism assembly.
Attach the Mechanism Assembly to the Base.
Position the mechanism assembly on “Base.stl” as shown.
Position “Wheel, Geared (64 teeth).stl” as shown.
Secure “Arm, Wheel Geared.stl” to the base with the first “Bolt, 4.2mm shoulder.stl”.
Secure “Wheel, Geared (64 teeth).stl” using “Axle, Wheel Geared.stl”. The axle will travel through the center hole in the geared wheel, through the free hole in the lower arm assembly, throughout the free hole in the upper arm assembly, then into the threads in the base.
Attach the Mechanisms to Wheel, Geared (64 Teeth).stl.
Position “Arm, Wheel.stl” as shown then secure it to “Wheel, Geared (64 teeth).stl” using the second “Bolt, 4.2mm shoulder.stl”.
At this point, “Wheel, Geared (64 teeth.stl)” should easily rotate and the mechanism should work smoothly. If any binding occurs, make sure the arms are positioned properly and the bolts are not over tightened.
Attach the Gate.
Position “Gate.stl” onto the base assembly as shown, then secure it in place with “Axle, Gate.stl”.
Final Assembly.
Press “Gear, Spur (8 teeth).stl” onto the motor shaft as shown, then slide the assembly into the base until “Gear, Spur (8 teeth).stl” aligns with the teeth on “Wheel, Geared (64 teeth).stl”
Apply 1.5vdc to the motor such that “Wheel, Geared (64 teeth).stl” rotates counter-clockwise when viewed from the front.
That’s how I printed and assembled “Marblevator, Mechanisms”!
Hope you enjoy it!
-
BUTToN GEAR FOREVER 3D Print Model
Summary
BUTToN GEAR FOREVER is here!
Like past years there is a functional version and a decorative version. Both have the four hole or the two slots design available. Each style is available for download individually or as a complete collection.
Thermally calibrated filament will help with maintaining the crispness of the fine detail and eliminate any under or over extrusion. One of these two calibration methods below is highly recommended.
https://www.thingiverse.com/thing:1037301https://www.thingiverse.com/thing:2502677
A good part cooling fan helps as well.
Enjoy!
Print Settings
Printer:
Rigidbot 2 (RB2) and RB3
Rafts:
No
Supports:
No
Resolution:
0.05mm
Infill:
24%
Notes:
Can be printed with 0.1mm layers or 0.05 mm layers. These were printed with a 0.4mm nozzle. A 0.3 or 0.2 will also work well.
Post-Printing
Stringing cleanup
The engraved version is prone to getting little strings across the engraved letters if retraction is not well tuned. Tune retraction for small close distance features. What strings you may still get can be cleaned up nice with a hobby knife. -
Generic City Building 07 3D Model
Archive icludes:Awesome Printable model(s) – 1-High Quality 3D Printable model-Slightly Curved Edges-Decimated Topology
-
Boot 3D Model
High Poly Boot.Measure units are meters, size is about 2 cm in length. Model is print ready.You can get second one with miroring this left one in your software.Mesh is manifold, has no bad contiguous edges.Available formats: .blend, .fbx, .stl, .obj, .dae, .3dsFaces count: 63360
-
ebike handle bar voltage mount 22mm & 1/2 inch 3D Print Model
Summary
magnet dia. is 13mm , voltage mount need support ,print as is and glue it later
Print Settings
Printer:
Hypercube
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
50 -
esc cover with rx antenna tube 3D Print Model
Summary
Imported existing esc cover into fusion 360, converted to a BRep and added an antennna tube for my rx antennas.
Fusion 360 source at: https://a360.co/2HUtSfT
Orient the stl in your slicer to position the antenna tube at a 45 degree angle to the horizontal, and print with supports in TPU. Use mirror in your slicer to print for the arm on the opposite side. -
Sonic 3 Planter 3D Print Model
Summary
Inspired by Augustin Flowalistik’s work with some of his gaming planters – this is one made with some 16 bit love for the Sega side of the console wars. Featuring the classic silhouettes of Sonic, Tails and Knuckles, and a fourth side featuring the 7 chaos emeralds. The top is adorn with rings all the way around.
Designed in Rhino, this comes in both single and dual extrusion varieties, and theres options for drainage or no drainage hole versions. -
Balkonhalter Sonnenschirm 3D Print Model
Summary
Hallo. dies iat ein Halter für den Sonnenschirm auf dem Balkon! Der Rohr vom Sonnenschirm sollte einen Durchmesser 32mm haben! Die Balkonaufnahme beträgt 42mm.
Print Settings
Printer Brand:
TEVO
Printer:
Tornado
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20 -
League of Legends 3D Print Model
Summary
This is a LoL Logo not designed by me.
I’ve added a little triangle holder at the bottom which fits with a master base as a support stand.
Currently there is only one base stand but there will be more coming soon.
Print Settings
Printer:
prusa i3 aluminum
Rafts:
Doesn’t Matter
Supports:
Yes
Resolution:
best with 0.15
Infill:
15+%
Notes:
Support is recommended due to the fact that it has a little triangle holder at the bottom and that doesn’t fit with the other part if printed without support -
Generic City Building 06 3D Model
Archive icludes:Awesome Printable model(s) – 1-High Quality 3D Printable model-Slightly Curved Edges-Decimated Topology
-
Generic City Building 04 3D Model
Archive icludes:Awesome Printable model(s) – 1-High Quality 3D Printable model-Slightly Curved Edges-Decimated Topology-No Support needed
-
Generic City Building 05 3D Model
Archive icludes:Awesome Printable model(s) – 1-High Quality 3D Printable model-Slightly Curved Edges-Decimated Topology-No Support needed
-
Barbra Ella1 – Bimbo Series Model 3 – by SPARX Free 3D Model
New Photos added of printed Item .I have added 2 sets of LED’s to my text looks cool. .The third of a series of “Female- Bimbo” (no offense to female members just Bimbo fits!) alternatives to known characters.This is a reasonable easy printable so if you follow the instructional PDFThere is full details of my inspirations, design tools used etc. in the enclosed instructions.pdf, I strongly advise downloading this to get the best possible print.Recently I have been asked “why this is not printing? “ Or “This is full of holes when printed?” Etc. .. please do not scale down or adjust my recommended settings for infill etc. . . as you can see from the pictures this prints very well and I believe you will be pleased with the result when completed.The picture of the development of the torso and bottom plate to get holes fixed and thickness for warping. These are a few of the many prints while developing the files to ensure they are completely printable before release.127hrs concept and modelling, 41hrs printing including 3 torso’s 3 legs to adjust the files to ensure prints correctly . .All of my models are only released when they can print! so please do not remix or “fix” faults in this model then republish! If there is a fault then let me know . . message me I will answer and fix problem. . apart from that print make enjoyI SHARE MY WORK FOR OTHERS TO ENJOY. . .COMING SOONAnother Barbarella figure with removable clothes! may put this up here for free . .see picsPrint SettingsPrinter:Da Vinci AIONotes:See PDF for clear instructions and settings
-
Footballer 02 Footstrike 05 STL 3D Model
Footballer 02 Footstrike 05 STL 3D print model3d printable model of the footballer similar to Ronaldo player.Model has near 180mm height.2 Millions 3mf checked for errors and repared.10 Millions obj included and can be used to add some details.See details in netfabb analisys preview picture.Not for macro renders
-
Figurine 3D Model
The figurine is made in the style of necronomicon.Included in each folder(archive) contains::- FBX files- Obj- 3ds max (2016-2015-2014)
