Summary
These are used to hold down blinds in a camping trailer
Print Settings
Printer:
maker select plus
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
100%
Category: 3D Print Models
Premium & 3D Print models ready to be 3d printed. 3D Print Models and Free 3D Print Models are available for download in several formats including .STL, .3DM, .OBJ, .3DS, .DAE, .SKP, .BLEND, .DWG, .DXF, .STEP and much more. If you’re in search of high-quality 3D printed assets, we have a huge library of 3d print models for any of your needs. Also you can visit 3D Models and All 3D Models category.
-
Blind Holder 3D Print Model
-
Millennium Falcon RFID fob housing 3D Print Model
Summary
A housing for an RFID Fob, HID ProxiKey 3, I believe. -
super jeton porte liste des achats 3D Print Model
Summary
Jeton pour chariot type “Caddie” adapté pour les personnes souffrant d’arthrose et permettant d’accrocher la liste des achats.
Des rivets permettent de réunir les jetons pour faire une chaîne de cœurs. -
Manta the Flexy Ray 3D Print Model
Summary
Flex Manta
Print Settings
Printer:
I3 Mega
Rafts:
No
Supports:
No
Resolution:
0.1, 2 shells
Infill:
0%
Notes:
you may need the cooling tower to print the back fin -
Radial engine 3D Print Model
Summary
You will need:
1 metal shaft that is 4.5 mm thick that can be used for the propeller, Super glue and hobby paint if you want to paint the engine.
The card that is on the engine stand can be designed as you wish. For example, if you want to add text with facts about radial engines or put on an image on it.
Print Settings
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 V2
Rafts:
Doesn’t Matter
Supports:
Yes
Resolution:
Highest
Infill:
30% -
JM coil tattoo frame FINAL PRODUCT 3D Print Model
Summary
This is the final product of this design. USE HIGH DENSITY PLA or CARBON FIBER filament. Added bigger post wiring slot and thinner spring post and smaller frame thickness. Use 6-8 wrap coils. Designed as a liner machine. -
B9 Robot radar sensors (ears) 3D Print Model
Summary
This is my first upload to Thingiverse. These are the parabolic radar sensors, more commonly referred to as ears, on the sides of the radar platform of the B9 robot’s head. They are scaled for a full size B9 replica. The sensors are a bit thicker than aluminum sensors would be, approximately 1/16 of an inch thick, for added durability necessary for printing in plastic. They already have the holes for the motor posts and the set screws. Best printed in PLA on the fine setting with a layer thickness of 0.1mm. More files to follow. Enjoy! -
Rapier/dagger filler piece 3D Print Model
Summary
To be able to hold the blade to the guard/handle/pommel, a piece like this is needed. It has been tested and fits my dagger from dark wood armoury. Usually this piece is joined to guard, but this one has it without the guard so the guard can be added to designs.
However, it isn’t one size fits all, so consider printing just this piece out or finding some way to test it with the desired blade before trying to design guard with it. -
Burroughs B205 3D Print Model
Summary
Burroughs B205 computer console was the one seen in many Sci fi shows of the 60’s and 70’s. There’s ten of them alone in the opening scenes of launch control in the first episode of lost-in-space. And of course there were two on the Jupiter itself.
These STL files are based from documentation from www.angelfire.com/scifi/B205/
My intent was to 3D print one (34 percent size fits on my Lulzbot) and use an Arduino to drive patterns to LEDS. I got started on the project but haven’t finished as of this writing.
Enjoy the files, and relive your childhood!
Changes from the original
1) Since the original was made in sheet metal, I found it necessary to beef up the main body for 3D Printing.
2) I took some liberties with the back panel and how it fits in. Nicer than how it was on the original box.
Printing: You will need supports for the main body.
Print the body on it’s back with supports.
Print all other parts flat on the print-bed
https://youtu.be/s4_lZgSgayw -
Ender 3 PSU Cover from CREALITY 3D 3D Print Model
Summary
STL file from CREALITY 3D for the Ender 3 PSU.
They emailed me the file for a replacement PSU I will be getting. -
Desk Pencil-holder/ cup/ stand/ organiser 3D Print Model
Summary
Pencil holder to organise your desk!
Print Settings
Printer Brand:
Creality
Printer:
Ender 2
Rafts:
Yes
Supports:
No
Resolution:
0.15 mm
Infill:
25%
Notes:
Brim recommended -
Ultraligero reciclado 3D Print Model
Summary
Este es un diseño de un ultraligero, construido con restos de otros aviones.
Las alas creo recordar que eran de un Skywalker al igual que la cola. Las varillas de union que forman el cuerpo son de una antena de television que el aire derribo.
Vuela muy bien.
Os dejo un videohttps://youtu.be/Y3n0PWQeTG4 -
Queen Chess Piece 3D Print Model
Summary
Learning how to create and edit 3D piece to print with the class. -
BlackPill Case 3D Print Model
Summary
Minimal case for “Black Pill” STM32 based board.Overview and Background
Minimal design of case for “Black Pill” board only to cover PCB.
Lesson Plan and Activity
TBD: Holes for reset switch, pinouts -
JBL clip 3D Print Model
Summary
Is just a simple clip for JBL Go, to use in the car.
Print Settings
Printer:
Monoprice mini
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
100% -
Pitan Geared Extruder (thinner tighter gears remix) 3D Print Model
Summary
These are the remixed gears I used in my Pitan make (https://www.thingiverse.com/make:493744) that are 5mm thick and have very tight D shaft and Hex Bolt Head fit. I ended up using Nylon because the small gear D shaft warbled out when I used PLA. Also as I mentioned in my make, I bought the hardware in bulk so send me a message if you would be interested in a set that includes the nuts, bolts, screws, washer, bearings (a 623 and two 695s or 625s), mk8 gear, spring, 3 meters of Nylon filament (enough to print gears twice), metal bowden groove mount, and some ptfe tube. -
Clapping Gun 3D Print Model
Summary
This is a clapping gun. The pins can be any rod of size. The spring needs to fil with ample tension.
The STP file has design data -
raptor 3D Print Model
Summary
ian
Print Settings
Printer Brand:
XYZprinting
Printer:
da Vinci 1.0 Pro 3in1
Rafts:
Yes
Supports:
Yes -
f35 lightning 3D Print Model
Summary
ian
Print Settings
Printer Brand:
XYZprinting
Printer:
da Vinci 1.0 Pro 3in1
Rafts:
Doesn’t Matter
Supports:
Doesn’t Matter -
8 relay ethernet board 3D Print Model
Summary
Support mural pour la carte de 8 relais ethernet trouvable sur aliexpress
Post-Printing -
Card holders 3D Print Model
Summary
Realización de un sujeta cartas como ayuda técnica dejando las manos libres para personas con problemas de movilidad en las manos.
How I Designed This -
Hooye Metric Tap Case 3D Print Model
Summary
I bought a Hooye metric tap set off of Amazon and it needed a case.
For the three smallest taps, I made the case to fit the handles for small taps here:https://www.thingiverse.com/thing:1701162
Hopefully others will find it useful.
Amazon link for the tap set:https://www.amazon.com/gp/product/B071VKZ2DC/ref=oh_aui_detailpage_o06_s01?ie=UTF8&psc=1 -
Featherlight AXII Mount 3D Print Model
Summary
An AXII mount for your Featherlight!
This mount is designed for the Featherlight, with 5mm OD standoffs spaced 30.5mm apart, but will work on any frame with a similar configuration.
Get your Featherlight here: http://falconmultirotors.com/featherlight5.html
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Clone
Rafts:
No
Supports:
Yes
Resolution:
0.3mm
Infill:
100
Notes:
Print in TPU -
Ring with heart and stones 3D Model
The model can be used for production, for casting and machining.STL model is ready for prototyping on CNC and 3D PrintingHigh quality modelweight in gold 7,400 gramweight in gold silver 4,900 gram
-
Scimitar Knife Weapon 3D Model
Scimitar Knife Weapon 3D print modelI have 2 formats for it1-Stl/scale 1:1 with 4 parts ready to printingX: 5.2cmY: 42.6cmZ: 90cm2-OBJ/for import another sofwaresI hope you like it.and, if you have any questions or problems with model(change the scale, missing files or something else ) – you can ask me : blackstar.dvh@gmail.comThank you,
-
CR-10 Titan Aero Touch mi 3D Print Model
Summary
Voici une tête d’impression pour creality cr 10 avec titan aero et touch mi
Print Settings
Printer Brand:
Creality
Printer:
CR-10 Mini
Rafts:
Doesn’t Matter
Supports:
Doesn’t Matter
Resolution:
0.2
Infill:
20
Notes:
support pour le support ventilateur -
Witch/Wizard 3D Print Model
Summary
This is a model of a halfling witch. It would also work well with a wizard. I designed the original model in DesktopHero3D, and modified it using MeshMixer.
Printing
I’ve had a few prints using an Ultimaker 3 Extended, which were fairly successful, but I’ve recently tried on a FormLabs form 2 and the detail is incredible.
Attributions
backer71 (Muscled Arm Left)
backer71 (Muscled Arm Right)
Xenon472 (Basic hood)
backer71 (Male Head)
DeltaFoxtrotZulu (Platform Hex)
The licenses for the individual assets used are:
Muscled Arm Left (Creative Commons – Attribution)
left hand closed (Creative Commons – Public Domain Dedication)
thick neck (Creative Commons – Public Domain Dedication)
Muscled Arm Right (Creative Commons – Attribution)
Simple Tunic (Creative Commons – Public Domain Dedication)
right hand closed (Creative Commons – Public Domain Dedication)
Basic hood (Creative Commons – Attribution)
Male Short Pants (Creative Commons – Public Domain Dedication)
Male Head (Creative Commons – Attribution)
Male Sandals (Creative Commons – Public Domain Dedication)
gnarled staff (Creative Commons – Public Domain Dedication)
male body (Creative Commons – Public Domain Dedication)
Platform Hex (Creative Commons – Attribution – Share Alike)
cloak cape (Creative Commons – Public Domain Dedication)
cloak cape (Creative Commons – Public Domain Dedication) -
Touchscreen Bracer iPhone 5 Concept for Prosthetic Arm 3D Print Model
Summary
I wanted to make an easy touchscreen holder for kids (and adults) to easily have a phone accessible and thought a bracer/gauntlet would be the way to go.
I am still learning CAD so this is very rough, did I mention very rough concept? lol
How I Designed This
Design Tool
Tinkercad -
Art 1 3D Print Model
Summary
Just another piece of intricate interactive art
Print Settings
Printer Brand:
XYZprinting
Printer:
da Vinci miniMaker
Rafts:
Yes
Supports:
Yes
Resolution:
100%
Infill:
75%
Notes:
print with exactly 75% nail for best results and use a 0.4mm nozzle -
The official mascot of the FIFA World Cup 2018 3D Model
The official mascot of the FIFA World Cup 20183D printAutosupport
-
Active Transport Protein 3D Print Model
Summary
Although not actual size, this active transport model is the perfect tool for teachers to demonstrate to students how molecules are moved against their concentration gradients through a membrane and into a cell. This product represents the process of an active transport protein diffusing molecules from their low concentration to their high concentration.
The whole model consists of two concentration placement holders (one representing the cytoplasm inside the cell and the other representing the extracellular matrix outside the cell), two extensions of the membrane, a protein plate on which the protein halves rotate, two protein halves that are equipped with engravings that can bind to certain molecules, two plugs to secure the protein into place with the plate, an ATP than can break off into an ADP and a single phosphate, and, as well as, several pieces of two different type of molecules. -
Sheet Screen Garter 3D Print Model
Summary
I was looking for some way of stretching a sheet to make a screen for a yard drive-in. Nothing came up so I thought I’d try something.
This hasn’t been tested in the yard yet but seems to hold a towel I tested it with. I’ll likely tweak it once I give it a go.
Created in AutoCAD because that’s what I’m familiar with.
Print Settings
Printer:
DIY HyperCube
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
50% -
Electric Saint Helmet Goggle Clip 3D Print Model
Summary
Goggle clip for the Electric Saint helmet. Mine required some filing, but after that it clipped right on. -
SE-14R trigger 3D Print Model
Summary
I tried to build the SE-14r blaster from rogue one as saved in the source material, but i broke the trigger and object titled (lower) by trying to fit them together. So i decided to open up 3D Builder and simply merge the two.
Print Settings
Printer:
Anycubic I3 Mega
Rafts:
Yes
Supports:
Doesn’t Matter
Infill:
25% -
3″ Pool Chlorinatior with Tourist Duck Lid 3D Print Model
Summary
I needed a chlorinator for use with 3″ tablets, but Tixhyl’s version is designed for the smaller (1″?) tablets. I liked the design, though, so… why reinvent the wheel? Simply rescaling the existing model wouldn’t work, though, because that would have changed the size and shape of the holes. So… I loaded Sketchup and redrew the design from scratch, with the adjusted dimensions.
Not being satisfied with that, though, I thought this needed a lid, and nothing looks better floating in the pool than a rubber duck. Unfortunately, I am not too good at organic modeling yet, so I borrowed 3DprinterOS’s totally awesome Tourist Duck. I did the merge for this in Blender, just because blender imports, and works with, existing STLs a lot easier than does Sketchup.
After printing, I painted the colored portions of the duck with Plaid Folk Art Multi-Surface acrylic paints.
Another Sketchup Model – Debunking the Myth that Sketchup is Useless in 3D Printing
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Supports:
Yes
Resolution:
0.2 – 0.3
Infill:
5-10%
Notes:
This needs to be able to float, so it is best to print the chlorinator with about 5% infill to make it as light as possible. The lid needs supports enabled and can be printed with between 5-10% infill. I printed every thing at 0.3mm layer height, simply because I wasn’t too concerned about overall appearance, but of course 0.2mm for the lid would look much better. As for supports, I used Cura’s “tree supports” just because they looked like hands holding the duck’s head. Of course, for large flat areas, like the underside of the lid, “tree supports” are not ideal, unless maybe you turn on “support interface” as well. If I did it again, I’d stick with standard support settings.
For the lid, I printed the lower half in white and then switched to yellow as soon as the duck portion started. At the 0.3mm layer height I used, this was at layer 111, but your mileage may vary, so you may want to double check that layer view before deciding where to swap colors. -
Halo Pear Sapphire Ring 3D Model
Halo Pear Sapphire Ring 3D print modelRing size: 6 (16.51mm).Model is ready for 3D Printing.Center stone – Pear cut sapphire 1,2 – 9,00mm x 6,00mm.Side stones – 10 Round by 0,0175carat 1,6mm x 1,6mm – 0,175 carat.Halo stones – 21 Round by 0,009 carat 1,2mm x 1,2mm – 0,189 carat.Total weight diamond – 0,364 carat.Weight of metal on photo.You have questions? Write to me.
-
Set from Ten Solitaire Ring 3D Model
Ten 3D print models engagement solitaire rings round.All rings size: 6 3/4 (17.12mm).All models is ready for 3D Printing.Center stone:0.10 carat – 3.00 mm.0.17 carat – 3.50 mm.0.20 carat – 3.80 mm.0.25 carat – 4.00 mm.0.30 carat – 4.35 mm.0.35 carat – 4.50 mm.0.50 carat – 5.15 mm.0.70 carat – 5.80 mm.1.00 carat – 6.40 mm.1.50 carat – 7.45 mm.Weight of metal on photo.You have questions? Write to me.
-
Halo Pear Tanzanite Ring 3D Model
Halo Pear Tanzanite Ring 3D print modelRing size: 6 (16.51mm).Model is ready for 3D Printing.Center stone – Pear cut tanzanite – 9,00mm x 6,00mm.Halo stones – 16 Round by 0,0175carat 1,6mm x 1,6mm – 0,28 carat.Weight of metal on photo.You have questions? Write to me.
-
3D Printable Mjolnir (Thor’s Hammer) 3D Print Model
Summary
This is a miniature printable version of the Mjolnir. It is very, very, tiny. -
Hygropeter (ThermoPro TP-50) mount for Filament storage box 3D Print Model
Summary
Mount for one of the most common Thermo- / Hygrometers on Amazon.
Mounting holes mad for M5.
Battery compartment still accessible after mounting.
ThermoPro TP50 on Amazon: https://amzn.to/2s1PSuA
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
Yes
Resolution:
2mm
Infill:
20% -
Despacito 3D Print Model
Summary
Yespacito
Hold it up to a light source for a good meme. Haven’t tried printing yet so send a pic if y’all have.
Print Settings
Printer Brand:
Wanhao
Printer:
Duplicator 6
Rafts:
Doesn’t Matter
Supports:
No
Resolution:
Any resolution, but smaller layer height will give better detail on the Boi.
Infill:
50%-100%
Notes:
despacito
Post-Printing
despacito
despacito
How I Designed This
despacito
despacitoDespacito
despacito
despacito -
Stylish gold ring 3D Model
The model can be used for production, for casting and machining.STL model is ready for prototyping on CNC and 3D PrintingHigh quality modelweight in gold 22,700 gramweight in gold silver 15,300 gram
-
Double Extruder Helmet for OpenRC F1 car 3D Print Model
Summary
This is a modified version of the Helmet for OpenRC F1 car by tahustvedt for two color printing.
Print Settings
Printer:
Flyingbear P905x
Rafts:
No
Supports:
No
Resolution:
0.15
Infill:
20% -
Amcrest NVR Fan Mount 3D Print Model
Summary
This is a fan mount for an Amcrest NVR unit NV4432E. Amcrest unit ships with only one fan and one bracket. Stock fan is loud. now you can install two quieter fans. Only a 10mm wide fan will fit on the one side. Fans are 60mmx60mmx10mm or 15mm -
Pattern Weight from Washers 3D Print Model
Summary
I had some steel fender washers (inner diameter 0.25″, outer diameter 1.25″) and wanted to use them as weights for sewing patterns, so I whipped up this design in Fusion360 to make a little holder for them. Each holder fits 4 of washers I have. Be warned: It’s a tight fit and you’re unlikely to get your washers back without destroying the print.
I designed this to be printed at 0.2mm layer height and 0.5mm extrusion width.
Print Settings
Printer:
Creality Ender2
Rafts:
No
Supports:
No
Resolution:
0.2mm -
leepard ring with supports 3D Print Model
Summary
It is a ring with supports built already.
We are a factory produce non-casting and casting resins for various DLP LCD SLA 3D printers.
If you need resin material,contact us to get some any time:
[email protected]
wechat:1922988190
skype: +86 15216873412
Print Settings
Printer:
Jamghe DLP printer
Rafts:
No
Supports:
Yes
Notes:
slice 0.05mm,exposure time 2.8s/layer,material: Jamghe casting resin green color.
Post-Printing -
Simple USB Lampcase 3D Print Model
Summary
Designed for:
USBExtention Tube with Usb 2 bulb with M3 screw hole.
You can force the M3 screw into the printed hole( depending on the printer you might want to modify the hole)
Also please excuse the crappy photo quality 😛
Example of LED and USB Tube:
(Disclaimer: I do not receive royalty from these shops, nor am I making recommendation, just examples, anything similar will work)
LEDLamp: https://detail.tmall.com/item.htm?spm=a1z10.5-b-s.w4011-16538328951.66.5b42bf29cMTpOu&id=41300986048&rn=056775a5208ecb09f06e30ce695eae64&abbucket=17&skuId=3206025586110
USB Ext Tube: https://detail.tmall.com/item.htm?spm=a230r.1.14.55.2cab40be5mAAXJ&id=41286248566&ns=1&abbucket=15
Print Settings
Printer:
LM110
Rafts:
Doesn’t Matter
Supports:
No
Resolution:
0.2
Infill:
30% -
Asriel Dreemurr (Undertale) 3D Print Model
Summary
This is adult Asriel Dreemurr from Undertale, made by request from my girlfriend who loves the game.
Asriel just slides in the base (which is reversible, there is the Delta Rune or Flowey, you choose). It holds well, but if you want you can of course add a small dab of glue to hold it in place.
To print Asriel, you will need white and black filaments. Load the STL file in S3D (or Cura, but I don’t use it so I don’t know what the steps are) and go to the “advanced” tab. There, check “Stop printing at” and write 2mm. Save the Gcode as “Asriel 01.gcode” or whatever name you like 🙂
This is for the first part.
For the second part, you just have to uncheck “stop printing at” and check “start printing at” and indicate 2mm again. Save the gcode as “Asriel 02.gcode”.
Load some white filament in your printer and print “Asriel 01”. When it is finished, do not let the printer cool down and DO NOT move the bed at all, load black filament on your printer (don’t forget to purge the wite that is left in the hotend) and print “Asriel 02”. It will print directly on top of the white if you’ve followed the instructions correctly.
In this world, it’s print, or be printed!
Share your makes 🙂
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
Doesn’t Matter
Supports:
No
Infill:
100% -
camera stabilizer 3D Print Model
Summary
BOM (name : qty)
M6 8.8 any length : 1
M3 20mm : 20
M3 nut: 20
optional 625zz bearing elsewise print the dummy -
AM8 Duel Mosfets Mount (Or other 2040 Extrusion Frame 3D printers) 3D Print Model
Summary
This is a duel mosfet mount for a am8 frame. Do to the the size of cheap eBay mosfet you might have to drill the holes out very little. This will work with any 2040 Frame printer. -
Prusa MK3 3030 Extrusion Mounted Pi Camera 3D Print Model
Summary
I liked the ball joint flexibility of MoonDoggy’s pi cam design but didn’t want to attach it to the x-axis. So I modded jltx’s hard feet design to attach a ball joint and modded the original camera case to allow the cable to come out from the bottom.
To install first attach the base and bit to the extrusion securely as indicated on the hard feet design. This can be anywhere you like on the printer extrusions. Next insert the ball link into the base and twist it slightly, it should be a tight fit as I had to use pliers. The rest is the same instructions as the cam design. You can use the original camera back on the new camera front. I hid the cam ribbon cable under the printer for tidiness. -
Fish8840 transistor tester box 3D Print Model
Summary
Yet another box for the fish8840 transistor tester.
This one uses M3 x 27 mm bolts to hold everything together, and includes a large box for a battery. I designed the box to hold this rechargeable battery
I’ve included the FreeCAD design file – have fun remixing!
This is my first design that I’ve published to thingiverse – I’d appreciate feedback. Thanks. -
Footballer 02 Footstrike 07 Stl 3D Model
Footballer 02 Footstrike 07 STL 3D print model3d printable model of the footballer similar to Ronaldo player.Model has near 180mm height.2 Millions 3mf checked for errors and repared.10 Millions obj included and can be used to add some details.See details in netfabb analisys preview picture.Not for macro renders
-
Phoropter Near Card Holder 3D Print Model
Summary
This item was created to provide a stable near card position on a standard phoropter near rod. Printing in two pieces allows for rotation around the pivot. The frame was designed to fit the OSU College of Optometry Near Cards, which can be purchased from the OSU College of Optometry (https://optometry.osu.edu/sites/default/files/PDFs/IMC_Materials_List_20170928.pdf). The design allows for multiple card insertion with visibility from each side as the card is rotated. Elimination of a standard phoropter attachment clip provides increased stability. -
Binder strap stopper (2Hole Pitch80mm) 3D Print Model
Summary
Use this with Binder strap 2 hole type.
Print Settings
Printer:
Anet A8
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
100%
Notes:
ABS is used.
Suitable for Binder Strap (2 holes, 80mm pitch)
Post-Printing -
Cr-10 Hot End Model 3D Print Model
Summary
Just a mock up of the CR-10 Hot end
Using it to design a carriage for my custom printer using my spare cr-10 hot end -
Raggio Lungo Heavy Duty Booties 3D Print Model
Summary
PROTECT THAT SEXY RAGGIO BOTTOM PLATE! These are an even heavier version of the Veloce Heavy Duty Booties, with larger front bumper area and dual landing skids underneath. The outside edge and tip of these booties is a thick shock absorber. There’s a slight channel for your motor wires, and a lip to hold a ziptie around them and the bootie. See photos.
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Clone
Rafts:
Doesn’t Matter
Supports:
Yes
Resolution:
0.3mm
Infill:
Any
Notes:
See photos for recommended orientation and support locations. -
Deathstroke Helmet v2 3D Model
Deathstroke Helmet for printing on a 3d printerFile format: STL,OBJ,3Ds.Deathstroke (Slade Joseph Wilson) is a fictional supervillain appearing in American comic books published by DC Comics. Created by Marv Wolfman and George Pérez, the character first appeared in The New Teen Titans #2 (December 1980). Deathstroke has been ranked as the 24th Greatest Villain of All Time by Wizard magazine and as the 32nd Greatest Comic Book Villain of All Time by IGN.Deathstroke is a mercenary and assassin who serves as the archenemy of the Teen Titans, though writers have developed him over the years as an adversary of other superheroes in the DC Universe as well, such as Batman and Green Arrow. The character has been substantially adapted from the comics into multiple forms of media, including several Batman-related projects and the Teen Titans animated series. He has been portrayed in live-action by Manu Bennett on The CW’s television series Arrow, and by Joe Manganiello in the DC Extended Universe, beginning with a cameo in the 2017 film Justice League.
-
Venetial Blind Angle Cord Clip 3D Print Model
Summary
This is a clip that the venetian blind angle adjusting cords connect to. These clips are up in top and slid and clip into place on a ‘D’ shaped rod. When the clips rotate the cord wraps around these clips causing the blinds angle to change.
I printed this on a stock CR-10, horizontally with clip side up.
.1 layer height
100% infill
Support evrywhere
Brim
30 mm/sec
PETG for clip flexibilty
245c Noz
70c Bed
I have included the STL and the SCAD in case you need to modify for your application. -
Tubular clamp 3D Print Model
Summary
My friend needed a clamp to fix a bird feeder support. I made this with multiple cylinders and used VincentD’s hex library to make the holes for the #8 nuts.
Print Settings
Printer:
Anet A6
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
40% -
tunguska 3D Print Model
Summary
2k22 Tunguska
SA-19 Grison
https://en.wikipedia.org/wiki/2K22_Tunguska -
Mad Hatter Base 3D Print Model
Summary
Not a True Remix… but might be usefull for someone.
Following an idea from user @ wabah58, I just did a quick clean up, with 3DBuilder, of the Yogy bear base placeholders, the file is also from ReddadSteve (https://www.thingiverse.com/thing:2470853)
So its a simple Yogi Base without holes that you can scale at will!
Im printing it right now with 200% scaling on X and Y and left at 100% Scale on Z so it has the same height of the yogi base. At this size I will have space for a few more shrooms… -
Flower Ring 3D Model
High Poly Ring.Measure units are meters, size is 20 mm . Model is print ready.Mesh is manifold, has no bad contiguous edges.Available formats: .blend, .fbx, .stl, .obj, .dae, .3dsMesh concists of 897204 triangular faces.For .3ds format there is only 60112 faces
-
Coil Spring Pen Holder 3D Print Model
Summary
I recreated a coil spring pen holder I had came across. Just getting the file out for now, will edit all this stuff when I get a little more time. -
CR-10 Spool Holder 3D Print Model
Summary
I wanted a better spool holder, but didn’t want to completely do away with the stock bracket. This is essentially a sleeve bearing designed to fit over the stock 32mm pipe. It prints in four pieces (you need two dividers) and uses 32x 4.5mm steel BB’s. It can hold any filament spool with a center hole of 54mm or larger.
Print as upright cylinders, no supports. I recommend a brim as it’s not a ton of surface area to stick down. -
Triforce Smartphone Stand Revised 3D Print Model
Summary
This is a minor remix of Rem3_1415926’s Triforce Smartphone Stand. It replaces the inward-sloping shelf with a level shelf and lip — this may hold your phone better.
Thanks, Rem3, for the attractive design! -
Crown 3D Print Model
Summary
Simple crown, printable without support.
I did not like any crown, i could find, so i desing my own.
Designed as a part of treasure, for child’s game/treasure hunt. There is an chalice in same design.
Enjoy. -
Stepper motor mount for FLSun QQ 3D Print Model
Summary
This is for folks who prefer shorter bowden tube & easier to load filament when the printer is position in a confined area. I use a little “bluetak” to make it less likely to slide along the side rail. -
Cube 18graney 3D Model
value on the faces you need to write the marker the relief spoils the geometry and the cube will be unstable
-
Shield of Kratos – Guardian Shield – God of War 2018 3D Model
Shield of Kratos – Guardian Shield – God of War 2018 3D print modelThe Guardian Shield of Kratos in God of war 2018 – RealisticI have 3 formats for this model1/ STL- For Scale 1:6 Version : Have 6 parts – ready to printing (include 1 part is Shield merged all parts )size 1:6+X : 1.5 cm+Y: 12 cm+Z: 10 cm- For Scale 1:1 Version: Have 12 parts – ready to printing (include 1 part is Shield merged all parts )size 1:1+X : 9.2 cm+Y: 74 cm+Z: 51 cm2/ZTL – for Zbrush: Have 2 files (You can resize the size you want)3/OBJ – for import to another sofwaresSo, For customers who have purchased the Weapon Kratos – Leviathan AXE(https://3dexport.com/3dmodel-weapon-kratos-leviathan-axe-god-of-war-2018-193452.htm) – I will discount this product for them.and if you want get both(Shield & AXE kratos) I can fix the price for you. You can contact to my personal email: blackstar.dvh@gmail.comI hope you like it.and, if you have any question or problem with model(change the scale, missing files of something else ) – you can ask meThank you,
-
3D Printable Rabbit model 3D Model
High quality 3D-Printable model of RabbitWill be a good decoration for an any placeArchive includes:-Awesome 3D-Printable model of Rabbit – 1-Optimized decimated topology-Slightly curved edges
-
3D Printable Cow Model 3D Model
High quality 3D-Printable model of CowWill be a good decoration for an any placeArchive includes:-Awesome 3D-Printable model of Cow – 1-Optimized decimated topology-Slightly curved edges
