Download Free 3D Model Windows 10 Themed Start Button 3D Print Model

Summary
A simple angled windows 10 themed logo, which looks like the start menu button. I used pla hatchbox blue and black filament. Printed on my Monoprice Maker Select v2 at 215 c for extruder and 60 c on heated bed.
I was able to stick the four blue window panels to go in the holes at an angle; however, if you force the pieces in too much you may get them stuck in the plate (at no angle, just a boring flat look 😛 ). How I inserted the window panels: The right sides of the four window panels are angled towards you.
Modeled in Solidworks
Print Settings
Printer:
Monoprice Maker Select V2 Rafts:
No Supports:
No Resolution:
I’d recommend at least .20 for the detail, but you probably won’t need any lower res Infill:
Doesn’t Matter Notes:
The prints do not need to be particularly strong, just make sure your bed is level as possible to avoid warping on especially the back plate.
Keep in mind of your shell thickness for this one. The blue panels has a noticeable “pattern” by the borders. of the panels. If you want the pattern to be as wide as mine is, go with a shell thickness of 2.5 mm. It adds a little bit of shadow detail, which I like.