Download Free 3D Model Vandal/Desert Fox Steering Knuckle 3D Print Model

Summary
I bought a Hobbyking Desert Fox buggy for my son… and then a Quanum Vandal for myself,
While out doing donuts in the snow my son struck something and broke the lower control arm and steering knuckle. The parts are backordered and experience tells me that they may be months off…. so I decided to design my own replacement part.
This part should fit the Desert Fox and Vandal… as well as a few other makes/models (VTX)
Print Settings
Printer:
Malyan M150 Rafts:
No Supports:
Yes Resolution:
0.1mm Infill:
Solid (100%) Notes:
I printed this part with the upper control arm boss on the bottom.
My M150 had trouble printing the supports for the sides of the boss, but I let it run and it came out as a usable part.
The PLA is holding up so far.
Post-Printing
I drilled out the control-arm pin hole to suit the pin and the other three holes I drilled and tapped to 3×0.5 to suit the existing bolts.
How I Designed This
I designed this part in AutoCAD 2007.
Tried to stay as close to the original part as possible.