Download 3D Model PMM-13 with Holster and round 3D Model

Today I present to you a scene with a Makarov pistol modernized, a patron with an expansive bullet and a holster. I used PBR materials 2048×2048 Base color,AO,Metalic(Specular),Roughness(Bump) and Normal maps.Brief information:9-mm Makarov pistol modernized PMM (GRAU-56-A-125M) is a Russian pistol developed in the early 1990s under the theme of R & D “Grach”. Took part in the contest for a new army pistol under the designation “Grach-3”.70% of the details of the PMM pistol are interchangeable with the PM pistol.At the gun the frame is strengthened and the weight of the bolt is increased. The chamber PMM is equipped with spiral grooves, which allows to use for shooting high-pulse cartridges 9 × 18 mm PMM. During the shot, the pressure of the powder gases presses the walls of the sleeve into three grooves on the walls of the chamber, holding the sleeve in the chamber until the bullet flies out of the barrel and the pressure decreases, after which the sleeve is extracted and ejected. The maximum pressure in the barrel of the gun barrel with the new cartridge increased by 15%, which slightly increased the return.at PMM-8 standard shop from the Makarov pistol with a single-row arrangement of cartridges;at PMM-12, the store at the base is double-row, passing into a single-rowed neck. This scheme allowed to do without changing the design of the frame and the shutter.The magazine cover slightly protrudes forward, which gives the palm rest and can somewhat accelerate the recharge. The shape of the handle is changed to a more comfortable one, which improves the targeting and shooting conditions on the right hand side. On the back end of the handle is a notch for more reliable retention. The change in the retention organs can significantly improve the accuracy of the pistol shooting.Sighting devices of open type – a fly and a crescent with a slot.