Download Free 3D Model Magnetic Drip Tray 3D Print Model

Summary
A drip tray with magnets for attaching to the side of a fridge/kegerator.
I tried to keep the inside edges smooth with fillets to make cleaning easier. One thing I had about the metal ones is cleaning the corners so I tried to eliminate that with this one.
I printed it with PETG so it could be cleaned with hot water and not distort like PLA would.
Magnets are: 12.7mm (0.5″) diameter 3.2mm (0.125″) thickness
Print Settings
Printer Brand:
Wanhao Printer:
Wanhao Duplicator i3 Plus Rafts:
Doesn’t Matter Supports:
No Resolution:
0.25mm Infill:
35% Notes:
PETG or ABS preferred
Post-Printing
Add the magnets
I attached them with a small bit of epoxy on the magnet. It is a pretty tight fit so you don’t need much.