Skull-driptip for vape
Tag: Drip
-
Magnetic Drip Tray 3D Print Model
Summary
A drip tray with magnets for attaching to the side of a fridge/kegerator.
I tried to keep the inside edges smooth with fillets to make cleaning easier. One thing I had about the metal ones is cleaning the corners so I tried to eliminate that with this one.
I printed it with PETG so it could be cleaned with hot water and not distort like PLA would.
Magnets are: 12.7mm (0.5″) diameter 3.2mm (0.125″) thickness
Print Settings
Printer Brand:
Wanhao Printer:
Wanhao Duplicator i3 Plus Rafts:
Doesn’t Matter Supports:
No Resolution:
0.25mm Infill:
35% Notes:
PETG or ABS preferred
Post-Printing
Add the magnets
I attached them with a small bit of epoxy on the magnet. It is a pretty tight fit so you don’t need much. -
M.Terk Drip Tip 3D Print Model
Summary
I designed this drip tip to work with my M.Terk RDA on a Vaping American Made Rig Mod v3. It fits loosely without the oring, comfortably snug with an oring. The internal shape is tapered/conical to add a bit of restriction to the flow of air (strictly preference).
A single oring is used to help keep it tight/snug. What size works best may vary depending on print quality.
Print Settings
Printer Brand:
Prusa Printer:
Prusa Mk2 Rafts:
No Supports:
No Resolution:
0.15 mm Infill:
20% Notes:
Insert Dimensions: 11mm DIA x 6mm
Mouthpiece Dimensions: 14mm DIA x 12mm
Oring Dimensions: 7/16″ DIA x 1/16″ thickness (~11mm DIA x ~1.7mm thickness)
Print orientation was upside-down (mouthpiece on build plate, insert to the sky). I printed with no supports, but do as you like/require.
Total print time: ~24 minutes
Nozzle/Extruder Temperature: 210°C
Bed Temperature: 55°C
Material: PLA (Any material would likely work. Print settings may need to be adjusted accordingly)
Post-Printing
Finishing
Flashing trimmed from the build plate layer. Light sanding with 220 grit sandpaper to make a smoother “friendly” edge on the mouthpiece opening.
