Download Free 3D Model Kite Foil 3D Print Model

Summary
A hydrofoil allows kitesurfing in very low wind conditions. Unfortunately, they are quite expensive.Therefore, I decided to build my own.
I used for both wings an Eppler 817 profile
The wing area is about 600cm2 / 200cm2
The mast is a Manta 2 aluminium mast
buyed here: https://www.mantafoils.com/e-shop/Manta-aluminum-mast-production-scrap-p59642799
For the fuselange i choosed a 20×20 stainless steel square tube
The 3D-Printed wings were covered with gfk, the mast-box is also laminated with gfk.
The Board is a North freestyle fish 5`2″
The laminated wings are very stiff. The mast to board connection with the 3d mast adapter is not as stiff as i wished. Perhaps a laminated mast base plate is the better choice.