Download Free 3D Model Geometric Lithops Plant Pot 3D Print Model

Summary
As Lithops/Living Stones are a type of succulent that require very good drainage, this pot is designed with gaps in sides to allow the water to escape. They are also taller than wide to allow space for the tap roots.
The slots down the side are 1.5mm wide so to ensure the mix doesn’t fall through its a good idea to sift out anything smaller than this size. My soil sifter design has a 1.5mm option to do this: https://www.thingiverse.com/thing:2853130
I tend to print these pots with infill for the base but 0% infill above so there will be no infill showing.
I will be printing more at different sizes so will upload more when i make them.
Print Settings
Printer:
Anet AM8
Rafts:
No
Supports:
No
Resolution:
0.2mm

How to Print Different Infills on same model in Cura
After adding the model you want to print into cura, add a basic solid stl, such as a 10mm cube.
Scale the cube to cover the area you want to have a different infill to the rest of the model.
On the left click Per Model settings, then select Modify setting for overlap with other models.
Then you can select settings that are modified within this area, just select infill density, in the example below i used 15% for the base and the rest of the model was printed with 0% infill as per the general settings.
I thought i would put this instruction online somewhere as i took some time looking up how to do this!