Download Free 3D Model Asriel Dreemurr (Undertale) 3D Print Model

Summary
This is adult Asriel Dreemurr from Undertale, made by request from my girlfriend who loves the game.
Asriel just slides in the base (which is reversible, there is the Delta Rune or Flowey, you choose). It holds well, but if you want you can of course add a small dab of glue to hold it in place.
To print Asriel, you will need white and black filaments. Load the STL file in S3D (or Cura, but I don’t use it so I don’t know what the steps are) and go to the “advanced” tab. There, check “Stop printing at” and write 2mm. Save the Gcode as “Asriel 01.gcode” or whatever name you like 🙂
This is for the first part.
For the second part, you just have to uncheck “stop printing at” and check “start printing at” and indicate 2mm again. Save the gcode as “Asriel 02.gcode”.
Load some white filament in your printer and print “Asriel 01”. When it is finished, do not let the printer cool down and DO NOT move the bed at all, load black filament on your printer (don’t forget to purge the wite that is left in the hotend) and print “Asriel 02”. It will print directly on top of the white if you’ve followed the instructions correctly.
In this world, it’s print, or be printed!
Share your makes 🙂
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
Doesn’t Matter
Supports:
No
Infill:
100%