Summary
Redesigned this to fit the Celestron NexStar 102 SLT
Category: 3D Print Models
Premium & 3D Print models ready to be 3d printed. 3D Print Models and Free 3D Print Models are available for download in several formats including .STL, .3DM, .OBJ, .3DS, .DAE, .SKP, .BLEND, .DWG, .DXF, .STEP and much more. If you’re in search of high-quality 3D printed assets, we have a huge library of 3d print models for any of your needs. Also you can visit 3D Models and All 3D Models category.
-
Bahtinov Mask – Celestron NexStar 102 SLT 3D Print Model
-
Azul Scoretrack Overlay – Board Game 3D Print Model
Summary
This is an overlay for the scoretrack in the board game Azul.
It lays over the scoretrack well, and the cube fits. Depending on the tolerance of your machine, the fit can be a bit tight. You can print it at 101 or 102% to have the cube fit better, but then it will not line up perfectly with the squares on the scoretrack.
[The scoretrack squares are slightly smaller than the cube size, making this a frustrating design.] -
M24 to M22 UK tap adaptor 3D Print Model
Summary
I needed a tap connector for an ebay special tap aerator, unfortunately the tap has a 24mm thread and the aerator a 22mm thread. -
Pendant hammer of Thor 3D Model
The model can be used for production, for casting and machining.STL model is ready for prototyping on CNC and 3D PrintingHigh quality modelweight in gold 20.00 gramweight in gold silver 13.400 gram
-
Carved rosettes decor 6 3D Model
STL 3D model – Carved rosettes decorThe model is ready for prototyping with CNC machining and 3D printing.
-
Carved rosettes decor 6 3D Model
STL 3D model – Carved rosettes decorThe model is ready for prototyping with CNC machining and 3D printing.
-
Carved rosettes decor 7 3D Model
STL 3D model – Carved rosettes decorThe model is ready for prototyping with CNC machining and 3D printing.
-
Carved rosettes decor 8 3D Model
STL 3D model – Carved rosettes decorThe model is ready for prototyping with CNC machining and 3D printing.
-
Carved rosettes decor 9 3D Model
STL 3D model – Carved rosettes decorThe model is ready for prototyping with CNC machining and 3D printing.
-
Carved rosettes decor 10 3D Model
STL 3D model – Carved rosettes decorThe model is ready for prototyping with CNC machining and 3D printing.
-
Carved rosettes decor 11 3D Model
STL 3D model – Carved rosettes decorThe model is ready for prototyping with CNC machining and 3D printing.
-
Adventure time Princess bubblegum crown 3D Model
Adventure time. Fionna crystal swordFor the crystal, use the blue glass stone for the aquarium and the foil from the chocolate.
-
Carved rosettes decor 12 3D Model
STL 3D model – Carved rosettes decorThe model is ready for prototyping with CNC machining and 3D printing.
-
Carved rosettes decor 13 3D Model
STL 3D model – Carved rosettes decorThe model is ready for prototyping with CNC machining and 3D printing.
-
Carved rosettes decor 14 3D Model
STL 3D model – Carved rosettes decorThe model is ready for prototyping with CNC machining and 3D printing.
-
Carved rosettes decor 15 3D Model
STL 3D model – Carved rosettes decorThe model is ready for prototyping with CNC machining and 3D printing.
-
Carved rosettes decor 16 3D Model
STL 3D model – Carved rosettes decorThe model is ready for prototyping with CNC machining and 3D printing.
-
Carved rosettes decor 17 3D Model
STL 3D model – Carved rosettes decorThe model is ready for prototyping with CNC machining and 3D printing.
-
Carved rosettes decor 18 3D Model
STL 3D model – Carved rosettes decorThe model is ready for prototyping with CNC machining and 3D printing.
-
Carved rosettes decor 19 3D Model
STL 3D model – Carved rosettes decorThe model is ready for prototyping with CNC machining and 3D printing.
-
Carved rosettes decor 20 3D Model
STL 3D model – Carved rosettes decorThe model is ready for prototyping with CNC machining and 3D printing.
-
Carved rosettes decor 21 3D Model
STL 3D model – Carved rosettes decorThe model is ready for prototyping with CNC machining and 3D printing.
-
Carved rosettes decor 22 3D Model
STL 3D model – Carved rosettes decorThe model is ready for prototyping with CNC machining and 3D printing.
-
Carved rosettes decor 23 3D Model
STL 3D model – Carved rosettes decorThe model is ready for prototyping with CNC machining and 3D printing.
-
Carved rosettes decor 24 3D Model
STL 3D model – Carved rosettes decorThe model is ready for prototyping with CNC machining and 3D printing.
-
Carved rosettes decor 25 3D Model
STL 3D model – Carved rosettes decorThe model is ready for prototyping with CNC machining and 3D printing.
-
Carved rosettes decor 26 3D Model
STL 3D model – Carved rosettes decorThe model is ready for prototyping with CNC machining and 3D printing.
-
Carved rosettes decor 27 3D Model
STL 3D model – Carved rosettes decorThe model is ready for prototyping with CNC machining and 3D printing.
-
Carved rosettes decor 28 3D Model
STL 3D model – Carved rosettes decorThe model is ready for prototyping with CNC machining and 3D printing.
-
Carved rosettes decor 29 3D Model
STL 3D model – Carved rosettes decorThe model is ready for prototyping with CNC machining and 3D printing.
-
Carved rosettes decor 30 3D Model
STL 3D model – Carved rosettes decorThe model is ready for prototyping with CNC machining and 3D printing.
-
Carved rosettes decor 31 3D Model
STL 3D model – Carved rosettes decorThe model is ready for prototyping with CNC machining and 3D printing.
-
Adventure time Fionna crystal sword 3D Model
in fionnasword6.stl angle was small roundet, for bets printing, after use knife.
-
Modular (Vape Juice) Bottle Holders 3D Print Model
Summary
Modular organizers for standard 60mL and 30mL bottles. Designed for vape juice bottles.
With 0.3mm layer height and 10% infill, I was able to print each one in under an hour; they are designed to use a small amount of filament while at the same time being stable enough to hold the bottles and snap together.
I included a “blankModule” so that this design can be modified to organize other items.
There is a smaller and a larger holder for 30mL bottles, the larger one fits the glass bottles, while the smaller one fits the plastic dropper bottles. -
GreenEllipsis OpenSCAD Collection 3D Print Model
Summary
The first in a collection of OpenSCAD modules I’ve developed on the way to making things. Posted here in the hope you might find them useful. -
LED Flat Plate for V-Slot Rail D-Bot 3D Print Model
Summary
Just made these to hold my LED strip (2 rows, one above the other) And they snap into the V-Rail.
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.3
Infill:
100%
Notes:
Nothing special, suggest a skirt to prevent the drooling of the little nubs. But up to the individual. -
Rocket Blasting Off 3D Print Model
Summary
Could use some additional supports on the rocket or perhaps change the angle of the print for better quality. Just a cartoon rocket blasting off. Made it for my son, inspired by those Rocket Mortgage commercials.
Print Settings
Printer:
MP Mini Delta
Rafts:
No
Supports:
Yes
Resolution:
150
Infill:
20 -
flowerpot “STRATOCONIK” 3D Print Model
Summary
I wanted to create series of flowerpot for spring, and here is: flowerpot “STRATOCONIK” -
Delta arm dampener 56mm pitch 3D Print Model
Summary
This dampener is what I use as the rods I use have 56mm pitch (center to center distance on the rods) and 7mm diameter.
Others I found were much too short. I have made sure the model is sliced correctly on S3D as well as Cura etc. I have also reinforced the center arc sides a little as that seems to be where the stress can cause failures on dampeners. Also made the snapping on and off easier by rounding the inner edges of the rod grips.
I advise using PETG or ABS as PLA just isn’t great for this type of attachment.
Print Settings
Printer:
Anycubic Kossel
Rafts:
No
Supports:
No
Resolution:
0.1 – 0.2 (I prefer 0.15)
Infill:
100% -
lincoln plaque 3D Print Model
Summary
Lincoln plaque
Print Settings
Printer:
anet a8
Rafts:
No
Supports:
Doesn’t Matter
Resolution:
0.2
Infill:
20 -
replacement moonroof / sunroof switch for lincoln ls 3D Print Model
Summary
mine was missing so I made this.. -
Vacuum Impeller Housing 3D Print Model
Summary
Needed a small vacuum to clean up my work area after all the messes that accrue. Rather than spend $30 on a small shop vac, I figured it could be an interesting opportunity to see how sturdy of a print I could make while testing out how accurate I could print threads generated in Fusion 360. I went to a local goodwill and bought a corded dust buster for $3, a seal-able ammo can from harbor freight, and a couple other components. In all it cost around $10. I used extra filament which is why the assembly is three colors. overall it works a hell of a lot better than the original used vacuum, but I would’ve maybe chosen a more powerful impeller motor if I were starting over. -
MKS SBASE 1.3 BOX include Dual Mosfet, Four TL-Smoother, and FAN 120mm and Bracket to Alumunium Profile 3D Print Model
Summary
This is MKS Sbase case the dimension is 200x160x63 need a larger printer to do that.
Support for dual mosfet and four TL Smoother
Cooling by 120 mm Fan
add three hole on center to mount to alumunium profile vertically
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Clone
Rafts:
No
Supports:
No
Infill:
20 -
Key Chain, Happy Chinese New Year, Happiness, Spring Festival, 福, 春 3D Print Model
Summary
Key Chain Spinner, Happiness & Spring, 福, 春
To observe the Chinese New Year or Spring Festival, people in China like hanging well-wishing Chinese characters or poetic couplets on their door frames, cars, or other places. The spinner here has Happiness (福) on one side and Spring ( 春) on the side. It is about 45mm in diameter. It might be an interesting 3D design project for those interested. May the little thing bring you peace and happiness!
Print Settings
Rafts:
No
Supports:
No
Resolution:
.1 to .2mm
Infill:
5-20% -
Spcmaker 95 shark fin antenna mount/brace 3D Print Model
Summary
I whipped up this antenna mount for the spcmaker 95. Helps with turtle mode. Also keeps fpv antenna out of the props.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2S
Rafts:
No
Supports:
No
Infill:
Solid -
Emoji Headphone Wrap 3D Print Model
Summary
Weird headphone wrap designed to look like an emoji with earbuds -
Syanna Buckle Set – The Witcher 3D Print Model
Summary
About The Model
Here we have a pair of buckles for Sylvia Anna’s (Syanna’s) outfit in the Witcher 3: Wild Hunt.
They are used as follows:
Large buckle – upper waist – 55mm strap.
Small buckle – lower waist – 25mm strap
Obviously being plastic these have a limit on their weight bearing compared to metal, so I suggest a hidden secondary support on the belts, This being said, the largest one has been tested bearing up to 30kg of weight (in PLA at 100% infill) and passed not breaking, so are more resilient than expected.
Support Me
Though I provide this print for free, if you’d like to shout me a coffee or support my work (Patreon’s will get future files earlier than everyone else) – all of which helps me create more of these free models – you can do so on the following links:
Ko-fi: https://ko-fi.com/valentinecostumes
Patreon: https://patreon.com/valentinecostumes
Commissions
If you’re interesting in commissioning other buckles from the Witcher series, or any other file, feel free to contact me on here.
Socials
You can follow me and my work on the following sites:
Instagram
Facebook
Twitter -
Falcata Sword for casting 3D Print Model
Summary
I was looking for a suitable sword for casting in aluminium and found this:https://www.thingiverse.com/thing:1715548
I split it in half, added pegs and removed connectors as they were wildly off.
You can see me casting it here:
-
CR-10 / Tronxy Mittens Cooler 3D Print Model
Summary
Let’s keep it cool!
My take on a better cooler for the CR-10 Tronxy X1/3 type hotend. The stock CR-10 set up can cool the heater block too much if you don’t have it wrapped. The parts doesn’t cool all sides well. My Tronxy X3 didn’t have a parts cooler and the heater block couldn’t get temps over 205C.
I tried a couple other popular coolers but did not fit my original parts blower or just not that efficient.
So the Mittens Cooler evolved. Printed in PETG, it weighs 12 grams. Has a bit fo a twist for a little vortex of air.
Needs a few things: a 5015 blower/fan, a few screws, a bit of rewiring, and a bit of tenacity.
WARINING: It works for me. Your results may vary wildly.
If this helps you, a tip would be nice. At least a like and show your makes.
I’ve gone through dozens and dozens of printed revisions to get to this version. Help keep me in plastic. Thanks!
Please note, this is not compatible with the auto-leveling sensor. Send me one and I’ll try to make one fit.
Print Settings
Printer:
Creality CR-10
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
15%
Notes:
Printed with a 10mm brim. My CR-10 took about 2 hours to print.
2 perimeters/shells, 5 top and 4 bottom layers.
I printed in PLA to get started then switch to better temperature-resistance PETG.
Has a built-in support piece (square patch) that should snap out easily. If not, you may have a bit of over-extrusion.
Post-Printing
Clean up
Break out the square support. Careful using hobby knife, trim away the brim and any stray printed strands.Check the parts blower outlets and clean up as needed.
WARNING: Use at your own risk. I’ve tested this best I can at this time and works great for me. Your results may vary greatly.
Gather parts
existing 40mm fan
M3x12 or possible 10s (2-4) — for mounting fan to Mittens Cooler (should be able to reuse existing screws)
5015 blower/fan (needs to be wired–splice and solder or add a connector)
M3x8 screw — for holding 5015 fan/blower
M3x16 screw (2) — for attaching Mitten Cooler and block to mount (should be able to reuse existing screwsDisassembly
Disassemble the hot end removing the housing screws and the fan mounting screws.
Wire in the new 5015 fan.blower paying attention to red and black wiring.
Save the screws since some can be reused.Assembly
The screws should thread themselves into the Mitten Cooler. If they are super tight, you may be over-extruding. Ream the holes bit and try fitting the screws again.
make sure the printer is off
snap the hot end in the back of the Mitten Cooler with the heater wiring to the left
line up the mounting holes to the top two holes on the finned cooling block
push through the M3x16 screws
check to make sure the parts cooling outlets are above the nozzle opening
carefully line up to the mount
tighten screws — if there is an resistance, make sure the screws are aligned properly
insert the 5015 fan/blower
insert the Mx8 screw in the top hole
tighten screw to snuggle hold the 5015 fan/blower
screw in the 40mm fan using M3x12/16. Can get by with just two screws. Snug but not too tight or you could warp the fan adding more noise
check clearance on everything and the give it a go -
Hook 3D Print Model
Summary
I hung on the hook cooking utensils
Print Settings
Printer:
self made
Rafts:
No
Supports:
Yes
Infill:
20% -
custom lightsaber designed by Mawena Gawe 3D Print Model
Summary
This is a custom lightsaber designed by my friend, Mawena. When I saw his design I went into tinkercad and started working on a 3d design for it
Here are the colors for the different pieces:
silver/light gray: bottom shell, top
black: base and circular part
red: smaller button on control panel
white: longer button on control panel
gold: control panel
dark gray: bottom
How I Designed This
I used tinkercad -
Fox and Hounds Board Game 3D Print Model
Summary
Fox and Hounds is played on a chess board or checkers board sized 8×8. 4 similar colored pawns or checkers as hounds and a single pawn or checker in other color as a fox.
Hounds are placed onto fields b8, d8, f8, and h8. Fox starts set onto e1. Fox moves first.
Hounds hunting the fox. The fox moves diagonally one field range forward or backward onto an empty adjacent square per turn. Hounds can only move diagonally one field forward (towards row 1) onto an empty adjacent square.
Since only diagonal moves are allowed the game is played on the 32 dark fields of the chess board only.
There is no capturing by jumping and no stacking of checkers. Neither by jumping the opponent as in Checkers nor by moving onto its field replacing the opponent.
Fox wins by reaching the other side of the board (8th row where hounds started their hunt).
Hounds win by blocking the fox such that it cannot move anymore (when fox has no legal move left).
If moving perfect then hounds will win.
I have 2 playing pieces for this game with dogs heads even though when I was growing up I plaid this with chess pawns. Enjoy. -
DNA 75/75c Squonk Box Mod 3D Print Model
Summary
Check out the Build Video for full details.
Need some parts?
DNA 75 / 75c BoardStainless Steel Actuators8ml Silicone Squonk BottleBattery ContactsM2 8mm screws & nuts
Truckbed Liner Spray -
Coffee Cup Hook 3D Print Model
Summary
This is a simple hook on which to hang coffee cups.
It requires a 1/8″ or M3 screw to connect the hook to the wall mount, and another to connect the wall mount to the wall. I used a washer and nylon locknut to attach the mount to the side of my cabinet.
Flip the tentacle and mount in order to make a left-hand version.
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Mk2
Rafts:
Doesn’t Matter
Supports:
Yes
Notes:
The tentacle requires supports, but the mount does not.
How I Designed This
To create the tentacle, I started with tapered cylinders in OpenSCAD, as shown in CoffeeCupHook.scad. After I was happy with their orientation, I exported to STL and used Blender to smooth out the junctions and adjust the curvature to make it more organic looking, then exported it to rawtentacle.stl.
Then I imported rawtentacle.stl back into OpenSCAD and used boolean logic to make the final tentacle and the wall mount pieces. -
Unicorn Light Switch Cover 3D Print Model
Summary
I’m very new to printing and modelling but I saw the Unicorn light switch cover plate by MikeMasek and thought my girls would go bonkers for it. Only issue was that it wouldn’t fit on my Monoprice Select Mini. So, I hacked this one together and probably made all kinds design mistakes but it worked and the girls love it. If you’d like to tell me all the things that could be improved, I’m all ears and eager to learn.
If you decide to print this on a MP Select Mini, be advised…I changed my print bed x and y dimensions to 127 to make this work. On one pass while printing the raft I did hear it bump against its hard limit so if you can make it work with everything set to 126 mm you might be better off. Needless, this print makes for a very full print bed on the MPSM.
I printed with white PLA and it turned out pretty well. On the next one, I’ll probably increase the outer layer a bit because it is a little translucent in some light. It is also 1 or 2mm smaller in diameter than the cover that was on there but it still covers well and looks good. Last thing is that the screws won’t sit flush unless you dremel them out a bit…could be easily fixed in the model. If I do another version, I’ll fix this in the model.
Thanks! Enjoy!
Print Settings
Printer:
Monoprice Select Mini
Rafts:
Yes
Supports:
Yes
Resolution:
.4
Infill:
20 -
Duplicator i3 Plus (or Clone) Cooling Duct 3D Print Model
Summary
I was looking for a cooling duct for my Balco Touch 3D Printer (duplicator i3 Plus clone) that used the stock 40mm fan and liked the one created for the i3 (https://www.thingiverse.com/thing:969338) However the position of the cooling ring, the mount, fan mount and the depth did not fit my printer. I therefore modified the design to offset the cooling ring, correct the mounting, depth and fan mount to fit. This is the result which should fit any i3 Plus or clone with a stock 40mm fan. -
Kylo Ren Lithophane 3D Print Model
Summary
This is a Lithophane of Kylo Ren from Star Wars. When held up to light, you can see the image clearly. -
Phone Stand 3D Print Model
Summary
Remixed to make the seat openings a little larger for my phone in its case. Also moved the upper section a little higher up so a cable can easily fit under it. -
Gold pendant of St Dmitry Donskoy 3D Model
The model can be used for production, for casting and machining.STL model is ready for prototyping on CNC and 3D PrintingHigh quality modelweight in gold 26.800 gramweight in gold silver 18,00 gramthe design was developed by me
-
Game of Thrones – Iron Throne – Cell Phone Holder 3D Print Model
Summary
This thrown is awesome….so awesome I thought it would be neat to make as a holder for my Moto G4 smartphone.
Using JinxtheRabit idea in his Galaxy Nexus Dock Enhanced, I designed it the same way for the cord and mount.
NOTE: This stand is for smartphones that have a width within 70mm and have a charging port on the middle bottom (medium smartphones). I provided the 3mf file for editing for different phones, but if you like I can try to make one fit yours (just send me the dimensions).
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Clone
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
10%
Notes:
This is a 27 hr print. -
LED Holder for 9x5mm Arms 3D Print Model
Summary
LED holders for the Riplite but can be used for other frames like the Hyphylite
