On March 21, 2008, Kurganmashzavod unveiled a modernized variant of the vehicle and was designated as the BMD-4M. The primary cause of the alterations was due to the bankruptcy of the original manufacturer being the Volgograd tractor factory. In 2008 it is planned to carry out comprehensive testing modernized BMD-4 program agreed with the Chief Armor Management (Bolshoi[who?]) of the Ministry of Defense and the VDV. According to test results and Mikhail Bolotin, the president of Concern Tractor Plants (KTZ), mass production was initially planned for the following year.[8] The mass production of the modernized BMD-4 was later postponed along with the 2S25 Sprut-SD.[9] Nikolay Makarov, the Chief of the General Staff of Russian Armed Forces, dismissed the BMD-4 as “a version of the BMP-3” with no protection and costs more than an expensive tank.[10]
Tag: arma
-
T-15 Barbaris 3D Model
Like the T-14, the T-15 is protected by reactive armour[4] and the Afganit (Russian: Афганит) active protection system. While the T-14 has its Afganit launch tubes at the base of its turret, the T-15 has them arrayed along the top sides of its hull.[5] It uses four soft-kill launchers to deploy smoke grenades that disrupt visual and infrared guidance systems, and five hard-kill launch tubes on top of the hull, compared to the T-14’s ten hard-kill tubes on the turret which automatically turns to face a threat.[2] The T-15 has “an unprecedented level of armor protection,” including improved passive steel and ceramic composite plate armor and a slat armor cage at the rear. Its new Malakhit (Malachite) ERA is claimed to protect against ATGMs like the FGM-148 Javelin and Missile Moyenne Portée (MMP) and 120 mm tank rounds like the German DM53/DM63 and American M829A3 APFSDS sabots. In addition to hard-kill and soft-kill APS, the developer uses a special paint that significantly reduces the vehicle’s infrared signature. The floor is reinforced with an additional armor plate for counter-mine and counter-IED protection, and it has a jamming system to detonate radio-controlled anti-tank mines. The T-15 has an NBC protection system.[1]
-
SAMP-T and Radar Arabel and missile ASTER-30 pack 3D Model
The SAMP/T also called MAMBA in the French army is a theatre antimissile system designed to protect the battlefield and sensitive tactical sites (such as airports and sea ports) against all current and future airborne threats, including cruise missiles, manned and unmanned aircraft and tactical ballistic missiles in the 600 km range class. The SAMP/T is produced by Eurosam, a 50:50 joint venture between MBDA and Thales. Its key components are the Aster 30 interceptor and Arabel multi-function radar. The SAMP/T has been designed to operate in extreme clutter and electronic countermeasures environments. Interoperability with other NATO air defense systems is another key for the SAMP/T program. The entire system could be airlifted by the latest NATO tactical transport aircraft such as the Airbus A400M and Lockheed-Martin C-130J Super Hercules deploying them anywhere around the globe. The French Air Force, after the Volfa exercise in February 2011, deployed a MAMBA (SAMP/T) unit to provide air defence coverage for the G8 summit in Deauville. The first French MAMBA squadron achieved operational status in October 2011. In March 2012 the MAMBA (SAMP/T) proved its ability to support Army mobile formations while matching their maneuver tempo. In June 2012, the Italian Army activates its first SAMP/T Regiment, in Mantova. On 6 March 2013, the Italian Army and the French Air Force deployed their SAMP/T medium range air defence systems for the first time within a NATO architecture in successfully intercepting a target representative of a theatre ballistic missile. After about 300 km of ballistic flight, the target, which had been launched from an aircraft, was destroyed by the Aster 30 interceptor missile. In September 2013, Singapore’s Defense Minister has announced that the Republic of Singapore Air Force (RSAF) will acquire the Eurosam Aster 30 / SAMP-T Surface-to-Air Missile (SAM) Air Defense System to establish a multi-layered defense against aerial threats.
-
LayinShots 3D Model
futuristic assault weapon with cannon launches advanced grenades and telescopic sight, molded with a high level of details and originally rendered in Blender (this model is not textured for reasons of personalization to the client’s liking)
-
Kunai Ninja Cartoon 3D Model
Low poly model of a kunai, classic ninja weapon, based on the anime series Naruto
-
VBCI VPC 3D Model
SHARECREW, VCI INFANTRY FIGHTING VEHICLETwo crew, plus nine combat teamCREW, VCP COMMAND POST VEHICLESevenMANUFACTURERSNexter Systems and Renault Trucks DéfenseOPERATORFrench ArmyExpandThe French Army has selected the Nexter / Renault VBCI 8×8 infantry fighting vehicle as a successor to the AMX10P. The VBCI (vehicule de combat d’infanterie) is a wheeled 8×8 infantry fighting vehicle with modular protection that can be adapted to the threat. Conditional orders have been placed to cover the supply of 700 vehicles to the French Army in two versions. There will be up to 550 VBCI/VCI infantry fighting vehicles and 150 VBCI/VPC command post vehicles.
-
AWP Sniper Rifle 3D Model
AWP Sniper Rifle 3D ModelHighpoly ModelVertices: 129,206Polycount: 122,628Lowpoly modelVertices: 15,006Polycount: 13,134
-
Armatrac logo 3D Model
armatrac logoHigh-poly 3D model.Model is made in Autodesc Maya 2012. For convenient use of the model, all сomponents are named.The model can be used in the manufacture of games,rendering images,videos.
-
Navya Arma 2016 3D Model
The 3d model based on a real bus, created according to the original dimensions. All model files were “smoothed”. We can provide product files with original geometry by your request.
All main parts of the model are separated objects. Therefore, you can easy change all materials. We provide several formats for each model, most of them available by default.
* images rendered with using V-Ray plugin (we don’t include lighting and environment to a set). -
3D Altar, Table sacred 3D Model
Altar for games, animation, rendering, composting.Already with textures and UV Mapping.
