Japanese name ?????Romaji name Kozukata YuriAge 19Height: 165cm (5’4″)Hair color: Auburn BrownEye color: BrownOccupation: Assistant to Hisoka KurosawaFamily: UnknownAppearances: Fatal Frame: Maiden of Black Water Super Smash Bros. UltimateIncludes original in game bones, swappable feet for indoor scenes. Blender file is included but i rarely use blender so the normal and spec will have to be applied by you. Hair weights are pretty basic and will need workProperty of Koei Tecmo and NintendoI do not claim ownership off this modelDo not claim as your own or sell for money
Tag: A
-
Hugo Inquisition – A Plague Tale : Innocence 3D Model
Formats of model/Textures – .tbscene/.fbx/.tga2k/TexturesExtracted and converting by me.This model and textures are the property of Asobo Studio.Developed by Asobo Studio.All Rights Reserved.
-
Beatrice – A Plague Tale : Innocence 3D Model
Formats of model/Textures – .tbscene/.fbx/.tgaExtracted and converting by me.This model and textures are the property of Asobo Studio.Developed by Asobo Studio.All Rights Reserved.
-
Amicia University – A Plague Tale : Innocence 3D Model
Formats of model/Textures – .tbscene/.fbx/.tgaExtracted and converting by me.This model and textures are the property of Asobo Studio.Developed by Asobo Studio.All Rights Reserved.
-
Amicia Chapter 1 – A Plague Tale : Innocence 3D Model
Formats of model/Textures – .tbscene/.fbx/.tga2k/Textures Extracted and converting by me.This model and textures are the property of Asobo Studio.Developed by Asobo Studio.All Rights Reserved.
-
CARPANESE HOME A beautiful style 2020 Bedroom 3D Collection
CARPANESE HOME A beautiful style 2020 Bedroom 3d Models
-
Ford Model A (Chums Buggy) 3D Model
3D модель постапокалиптического автомобиля из игры “Mad Max”Карты спекуляра, эмбиент оклюжн и т.д. в каналах текстуры “Tex_XXXX_2.dds”Возможные багипроблемы в автомобиле:Рессоры и амортизаторы в “прижатом” состоянииРазмер колес не соответствуют оригиналу(масштабировал на глаз)Возможно потребуется поправить uv координаты некоторых деталей
-
Feet for a 120mm fan 3D Print Model
Summary
Just like my other set of feet, but these are bigger feets for a bigger fan. All the better to blow you more. 😛
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
No
Supports:
No
Resolution:
1.5
Infill:
20% -
Trapezoid Area Formula, A= (a+b) × h /2, why? 3D Print Model
Summary
Trapezoid Area, A= (a+b) × h /2, why?
Given any trapezoid, if the parallel top and bottom are a and b, respectively, and the corresponding height (altitude) is h, the area is (a+b) × h /2. But why?
To see why, we take two congruent copies of a trapezoid and make a parallelogram with the same height and a base of (a+b). Such a parallelogram can be easily converted to a rectangle with a base of (a+b) and height (h, or width), and, accordingly, an area of (a+b) × h. Why do we have to divide that by 2? Well, it is because we want to know the area of the trapezoid. Of course, there are other ways to explain it. One way or the other, it goes back to what we know about rectangles or other shapes.
Two versions are provided to demonstrate the process behind A= (a+b) × h /2. The trapezoid is just a random one. Have fun.
Print Settings
Rafts:
No
Supports:
No
Resolution:
.1 to .2mm
Infill:
5-20% -
A Name 3D Print Model
Summary
This this is also a practical joke for workers, specifically ones names lebergay
Print Settings
Printer Brand:
MakerBot
Printer:
MakerBot Replicator (5th Generation)
Supports:
Yes -
Xiaomi m365 Clamp (scooter Frame Mounting) to add a box or bag – Plateau et Collier de serrage pour rajout de boite ou sac 3D Print Model
Summary
Participant à un groupe Telegram d’entraide/optimisation de la trottinette Xiaomi m365, j’ai modélisé ce plateau équipé de colliers de serrage s’intégrant sur le cadre entre la fourche avant et le deck pour rajouter une boite ou un sac rigide en les pinçant avec les éléments intérieurs,
A assembler avec des vis M5 x 60 à 70 (suivant l’épaisseur de votre boite) à tête cylindrique hexagonale et boulons associés
N’hésitez pas à me faire vos retours pour d’éventuelles améliorations, adaptations nécessaires… -
Gear set for cutting 10 pitch on a Hardinge TL 3D Print Model
Summary
To start, I measured the center to center on the two shafts on my Hardinge TL lathe that are used for external gearing. After some math I worked out that the ratio I needed was 25:16, with the big gear on the top. Knowing that I simply made two gears with a totally random pitch that had the right pitch circles to get the ratio right (48mm pitch diameter on the small one). FYI, going to 150 teeth on the big one gets the teeth too small for reliable printing. The set I actually built is 75 tooth by 60 tooth; sorry about the file name!
In use, you have to remove the external gear cover AND shift into the external gearing mode (all the way right on the quick change) AND set the three change to “1”.
These gears are a bit scary to use; stay the heck away from then while running! A little way oil (sticky) is a good idea. I was able to cut the 10 pitch Aluminum thread I needed using these without any visible damage on the teeth or bore.
Print Settings
Printer:
WeldingRodBot
Rafts:
No
Supports:
No
Infill:
50%+
Notes:
Its been a long time since I printed these, so I’m not totally sure what I did. I would use at least 3-4 shells with a 0.4mm nozzle.
You will need to ream out the bore and clean the keyway with a needle file. The bottom edges of the teeth are likely to need cleaning too, though you might be able to run one with the build surface toward the lathe and the other away from the lathe and get away with minimal finishing. -
DIY Bird Feeder with a bottle 3D Print Model
Summary
Easy-to-make bird feeder, that can be made with kids.
To attach the parts together use some strong waterproof glue -
Knob to Hold a 1/4 inch bolt or nut. 3D Print Model
Summary
You can snap in a 1/4 inch bolt or nut . Use to replace a wing nut. -
Mounting plate for a GT2560 Melzi board. 3D Print Model
Summary
Simple standoff mount for a GT2560 Melzi board.
The 2 mounting holes in the center are designed for 4mm screws.
Standoffs are designed to be tapped with 3mm threads.
The specific board is here :https://www.amazon.com/gp/product/B074TZC27M/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
20%
Notes:
Hatchbox silver PLA @ 200°C.
How I Designed This
Tapped standoffs with 3mm tap – holes are printed at 2.6mm. Mounting holes are 4.2mm, designed for 4mm screws. -
Minimalistic fan bracket / mount for 40mm fan on a nema 17 3D Print Model
Summary
I wanted to put a fan to a drive motor (nema 17), but do not have a lot of space for it, so I created this minimalistic fan bracket. Not ideal in any way, shape or form, but it does provide some cooling when there is little room for a fan.
Mount the bracket to a 40mm fan and glue the centre part with CA glue to the motor. Nothing more to it.
Print Settings
Printer:
Heavily modified mendelmax 2
Rafts:
No
Supports:
No
Resolution:
.250
Infill:
lots of it
Notes:
Print using a strong material and with lots of infill, since the arms are flimsy and need all the strength they can get. -
LCD Knob with a thumb sub-knob 3D Print Model
Summary
As for many of us, the knob that came in the kit was not working properly and got lost on the second day (or night, not sure, not enough sleep).
I wanted a small knob, that would allow to quickly change the speed of the print (as I’m twitchy during the night prints, usually worse by 4 am).
I’ve added a finger-tip knob onto the knob, to allow for faster/lazier spinning of the dial.
If it works for you, I’m glad. If it doesn’t, don’t bill me for the fill.
PS: Feel free to adjust the height (Z) of the knob.
Original size was slightly exaggerated in order to accommodate for the bracket of the spool holder, which is a bit too close to the knob. -
3.5″ hard drive mount to a flat surface 3D Print Model
Summary
These mounts will fasten a 3.5″ hard drive to a flat surface. They are inspired by tkbletsc’s hard drive brackets (https://www.thingiverse.com/thing:2352211), using the heights and sizes in his model, but created from scratch in TinkerCAD. The ledge lifts the HDD appx 6mm from the surface for cooling. The screw holes are 4mm internal diameter, and will fit standard hard drive screws.
This is the first model I have created and uploaded. I needed some hard drive mounts for an arcade machine project. All the other mounts I found where too large and would take too long to print, so I created this. Each mount is only about 2g and prints in around 15 mins (according to Cura 3.1 with a 0.2 layer height and 20% infill). -
Tablet Stand / Tripod (works with Samsung Tab A 8.0 2017) 3D Print Model
Summary
A tripod holder and stand for my son’s Samsung Tab A 8.0 (2017). It uses standard #2 pencils ;), cut to the same length, as legs. This fits around the rubber/plastic case for the tablet. It is currently holding tightly due to the press fit of the dovetail joint.
I used the Tablet Tripod Mount by lynce9956 as inspiration for my design. My son liked his design but wanted a few things different so we redesigned it from scratch. If you print yours at a finer resolution than I used, 0.32 mm layer height, the dovetail joint might fit a bit loser. My suggestion would be to add an elastic band in the dovetail area such as what was done by lynce9956. They used two eye screws and a rubber band to create tension to hold it closed.
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
Doesn’t Matter Supports:
Yes Resolution:
0.4 Notes:
I printed this in a really rough layer height as my son was being impatient and just wanted this stand to use his tablet as a camera. The large layer lines meant the fit was just slightly tight, but this worked well as I didn’t have to add any springs or elastics to tension it around the tablet. I printed this laying on it’s side so that the layers would help increase the strength. (i.e. the layer are parallel to the stress).
How I Designed This
Designed in Fusion 360
Fairly simple design. My son told me what he wanted and I translated that to a printable object. -
Replacement for the closing system of a PVC Window 3D Print Model
Summary
These are plastic replacements for a PVC window I had to repair.
Print Settings
Printer Brand:
Up! Printer:
Up Plus Rafts:
Yes Supports:
Doesn’t Matter Resolution:
0.25 Infill:
Maximum Notes:
Place the pieces carefuly NOT to put the Z axis of the printer along the axis of force, to ensure durability. -
Dungeon in a Tin Board Game 3D Print Model
Summary
Dungeon in a Tin is a solo or cooperative dungeon-hack. Players descend into a dungeon randomly laid-out from a stack of tiles, fighting through the orc and goblin hordes to rescue the kidnapped maiden and collect treasure and glory. -
TJBot – A DIY Robot powered by IBM Watson Cognitive Services 3D Print Model
Summary
This thing contains files to 3D TJBot – a do-it-yourself, open-source kit to learn, experiment with and explore AI using IBM Watson services. Once built, you can add a list of components ( raspberry pi, RGB LED, a microphone, speaker, a servo motor, and a camera) and then run sample code that allows the robot listen, speak, translate text, lookup the weather, wave its arm etc using various IBM Watson AI services.
Printing
Please print the right and left leg with supports. All other parts can be printed as is.
Want to Learn More?
View a step by step instructable on how to 3D print TJBot on Instructables.
Visit the TJBot website to learn more about the project. Hint: You can also make TJBot from laser cut cardboard.
Visit the TJBot [Github Repo].(https://github.com/ibmtjbot/tjbot) to learn more about how you can program TJBot.
Enjoy!
Post-PrintingGot all your parts printed? Here is how to assemble it all.
-
Laser Cut sword with a fluer de lis design 3D Print Model
Summary
This was designed with 5mm 3 layer plywood that I have. It works out to just over 0.19 inches. The plywood I have is 12 inches by 36 inches. -
A larger nut for “fessyFOO’s Yet Another Belt Tensioner” 3D Print Model
Summary
The original nut was a little too small and its edges to sharp for my taste, so I redesigned the outer ring in fusion 360 and smoothed the edges with fillets. The larger outer diameter helps put more force with ease! -
wall mount for the remote from a Phillips 55PUS7181 3D Print Model
Summary
simple wall mount for the remote of a Philips 55PUS7181 TV
Print Settings
Printer:
Anet A8 Rafts:
No Supports:
Yes Resolution:
0.15 mm Infill:
100% -
Taranis Pistola: A pistol grip RC controller with a Taranis X7 inside! 3D Print Model
Summary
I got tired of super expensive commercial surface receivers for my RC cars. At the same time, they only offer typically 4 or less channels. That was all fine and good for the standard RC car, but crawling rigs and semi-trucks often have additional features that could benefit from having additional channels.
I love my Taranis for quads and other aircraft but I never quite got the hang of driving with sticks.
Soooo, I bought a new Taranis X7, tore it apart, printed a new shell, and I can now present the Taranis Pistola!
This allows for up to 8 normal channels of control, plus you can link receivers together to get 32 (I think, I’ve never done it). You also get all the flexbility of the Taranis ecosystem like OpenTX, which allows you to mix and twist the controller to do just about anything you need.
Receivers are typically less than $30, with some 8 channel receivers in the low $20’s.
As for the design, I used a wheel and trigger cluster from a standard Traxxas remote, mostly because they are available cheap (or free if you or a friend has an unused unit lying around). You need to clip a plug from the Taranis and solder it to the potentiometer leads from the Traxxas cluster. I made a design decision to omit the other two proportional controls (the right stick) and two of the trim rockers (although one is located on the back of the remote as you need it to enter USB mode). I used a standard LiFE battery that is commercially available for $10. All pcb’s are retained from the original radio. The antenna comes soldered directly to a pcb, so I desoldered and added a Ufl./IPX connector to the board (there are pads for this purpose) or you could order an SMA to bare wire and solder directly to the board. I didn’t want to re-use the stock antenna because I wanted some flexibility in antenna choice.
If you can solder (or learn) this is decently straightforward. I posted a lengthy PDF with instructions that should get you most of the way if not all the way there. Start to finish this is about $120 + filament, which is pretty cheap for an 8 channel surface radio, especially since one does not exist commercially!
Feedback is appreciated!
Print Settings
Printer:
Prusa i3 mk2 Resolution:
.2 Infill:
20 Notes:
I printed the front face up with support, some printers will need a raft. The back I printed backside down, no supports. The grip needs no supports, I printed it standing up. The top I printed at a weird angle, back down with supports. I should have all stl’s in the correct orientation for printing, but please double check. -
Nate’s Head as a Cup 3D Print Model
Summary
I had my head scanned at Makerbot in NYC years ago. I decided to model it onto the side of a cup. I suggest using it as a pencil holder. -
Body for a smart house on Arduino mega 2560 3D Print Model
Summary
Body for a smart house on Arduino mega 2560https://www.youtube.com/watch?v=ISe2zEk1XCM -
A Cup Of Love 3D Print Model
Summary
A cup of love…
For more models please follow me, will post daily 🙂 -
support brosse à dents 3D Print Model
Summary
PLA DiscoEasy200
0.1
210°C
Diamétre de la ventouse :
Print Settings
Printer:
discoeasy200 Supports:
No Resolution:
0.1 -
fixation to stare a mirror on the wall 3D Print Model
Summary
a fixation to stare a mirror and a plug to hide the screw -
Honda motorcycle keychain (a remix) 3D Print Model
Summary
I scaled it down to be 50mm long and added a solid backing between the wings so I could do a filament color switch. Printed using TPU.
First I created a 2D outline using the following command in OpenSCAD:
projection(cut=false) import_stl(“/full/path/to/stl”);
and exported a DXF.
Then I imported the DXF into Onshape to remove the gaps between the wings and extrude it a few mm, then exported that as STL.
Then I imported both into Tinkercad to merge the STLs together:https://www.tinkercad.com/things/7UjYYDNdtQZ-honda-keychain
Thanks for the original design! -
Pi-Zor: a bitcoin cold wallet 3D Print Model
Summary
The is a case for the Raspberry Pi that is intended to be used as a Bitcoin hardware cold wallet. Note that this will never be as secure as a wallet using a secure element, like a Ledger Nano. The project’s namesake, the Trezor, doesn’t have a secure element, but is still more secure since its designed by security minded professionals, rather than a DIY project using a Pi Zero. The plus side, is you build it yourself so you know what’s in there, and if you take precautions, then you can probably keep this secure.
See my first explorations into this concept here: http://www.allaboutjake.com/pi-offline-crypto-wallet/
I am currently working on software for the Pi to expose an Electrum wallet on the Pi using the a menuing system on the LCD. This will include the signing of transactions using the QR codes and the PiCamera for input and the LCD for output.
If you find this useful, or you’d like to donate to the future development of this system, send some satoshi to the following address: 1PqvzEtDcboQYF2yhMvcdzK3J6uj7SMtQQ
Bill of materials
Raspberry Pi Zero (I’m using a W for development, but a non-W is better for a cold wallet)
1.44 ST7735 based LCD: http://r.ebay.com/b7ZpxI
5-Way Tactile Switch: http://r.ebay.com/U5YHC6
5MP Pi Camera: http://r.ebay.com/igagFy
Screws (M2.5×12 for the outside, M2.5×4 for the Pi inside.)
How I Designed This
I used OnShape to develop the case. Its kind of a tight fit, but the case does close.
The “middle plate” part is an unintended consequence of not having the right screws. I’m looking to get some M2x2 waver head screws for mounting the parts to the case.
I chose the 128×128 LCD specifically because it was 30mm wide and had more pixels than OLED displays used by other projects. (see http://hackaday.io/project/9564-rpi-zero-wifi-enabled-hardware-password-manager for one such project that uses OLED). More pixels are desirable for QRCode bandwidth.Future Possibilities
Some ideas on how this may evolve:
A PCB “bonnet” that holds the LCD, and 5-way switch, and maybe some extra hardware
A real-time clock module to remember the time
A lipo battery? (Its already pretty tight in there, not sure if I can fit it without making the case bigger)
Move to buttons (similar to http://hackaday.io/project/9564-rpi-zero-wifi-enabled-hardware-password-manager). The 5-way switch was quick and easy, but I think buttons would be better.
Inspiration
Things that inspired this project, but not specifically a remix
The initial inspiration for this project was the awful “Taken 3” movie where Liam Neeson uses a fictional device to download the GPS history from a car. (I don’t recommend this movie). See the frame cap below to see the device.
Other projects to make a Pi Zero-sized user interface to the Pi Zero include:
http://hackaday.io/project/9564-rpi-zero-wifi-enabled-hardware-password-manager
https://www.thingiverse.com/thing:1193350
Many GameBoy-like systems like PiGrrl, etc.I do have a very particular set of skills, skills I have acquired over a very long career.
-
ELEYUS Titan A 750 60 BL 90 BL Kitchens Hood 3D Collection
ELEYUS Titan A 750 60 BL 90 BL Kitchens Hood 3d Models
-
Samsung Galaxy A8 Champagne Gold 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
Samsung Galaxy A8 Pearl White 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
Samsung Galaxy A8 Midnight Black 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
A 3D model of tower tower 3D Model
There are four versions of the file format: 3DSMAX2014 format 3DSMAX2011 format FBX format obj format557
-
Animalarm – a sensor to control pet movements 3D Print Model
Summary
A simple but elegant project to create a “pet zone alarm” in your house. It uses infrared motion detectors to sense when a pet (or small child) is moving through a doorway or hall and sends out a loud tone. It does not beep when a (tall) person moves through the same area. With a bit of training animals recognise where they are welcome – without having to use physical gates.
NOTE: WIP – Some electronic component values are subject to change
Post-Printing
Caveats
Obviously, you will need to be able to get the PCB manufactured. The files are all there to do so and it is very cheap. And of course you need the skills and equipment to source and assemble the electronics!
If you want to use a different buzzer, you will need to make your own shell – but the electronics at least will work for you… Application
There is a single trimpot to set the length of the beep, once the alarm is triggered. You can also change component values (C1 in particular) to alter the delay before the alarm goes of before triggering the alarm. Set it longer if the system is triggering falsely.
There are pads in the 3D print design at the top and bottom of the Animalarm. Use double sided tape or bluetack at those locations to mount the alarm on the wall / doorway.
How I Designed This
How this works
The Animalarm uses two PIR (passive infrared) detectors to detect and discriminate between pets and people. The detector needs to be mounted on a door / wall about a meter above the ground. One PIR “looks down”, the other “looks up” to detect motion. A pet only triggers the lower detector and sets of the alarm. If a person is detected, the alarm either never triggers or is shut off.
The circuitry is built around a single CMOS chip and a few transistors – and of course battery, buzzer and PIR detectors. The circuitry is incredibly power efficient, drawing less than 30µW normally and only 10mA when triggered. This means the batteries will probably last a year in normal use… Electronics
The attached files include:
the Eagle design files (schematic and PCB)
Circuit schematic
PCB layers images
Gerber files for the PCB to be produced by seedstudio.com
List of special components and their sources
All the components are incredibly cheap; the PIR detectors are less than $2, the circuit board less than $1; indeed the most expensive component is the buzzer. The total component cost is about $15 (printed shell aside) -
3D model A 3D model of a skyscraper in an ancient city 3D Model
There are four versions of the file format: 3DSMAX2014 format 3DSMAX2011 format FBX format obj format527
-
A 3D model of ancient perfumed houses 3D Model
There are four versions of the file format: 3DSMAX2014 format 3DSMAX2011 format FBX format obj format523
-
Clessidra model 3D Model
A clessidra, it’s useful as timer, in wood, should be plenty of sands inside, not at this time.
-
Set-13 3D model 3D Model
In the archive there are all the models that are depicted in the preview. In the file 3d max there is no helpers
-
3D A 3D model of classical residential buildings in the snow model 3D Model
There are four versions of the file format: 3DSMAX2014 format 3DSMAX2011 format FBX format obj format509
-
A 3D model of classical residential buildings in the snow1 3D 3D Model
There are four versions of the file format: 3DSMAX2014 format 3DSMAX2011 format FBX format obj format512
-
A 3D model of classical dwellings in small attic 3D Model
There are four versions of the file format: 3DSMAX2014 format 3DSMAX2011 format FBX format obj format511
-
A 3D model of observation tower in snow ancient watchtower 3D model 3D Model
There are four versions of the file format: 3DSMAX2014 format 3DSMAX2011 format FBX format obj format507
-
Set – 1 3D model 3D Model
The archive has all the models and textures that are presented in the preview. There is no excess geometry and Helpers
-
Samsung Galaxy Tab A 9.7 S Pen White 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
A 3D model of the remnants of ancient Crusades 3D model 3D Model
There are four versions of the file format: 3DSMAX2014 format 3DSMAX2011 format FBX format obj format465
-
A 3D model of the bullpen of the bullpen shed 3D Model
There are four versions of the file format: 3DSMAX2014 format 3DSMAX2011 format FBX format obj format467
-
A 3D model of building tower defense tower 3D Model
There are four versions of the file format: 3DSMAX2014 format 3DSMAX2011 format FBX format obj format459
-
3D A 3D model of the building of the ancient arcade 3D Model
There are four versions of the file format: 3DSMAX2014 format 3DSMAX2011 format FBX format obj format452
-
Samsung Galaxy Tab A 9.7 S Pen White 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
K40 Laser Panel for using an LCD with a Cohesion 3D board 3D Print Model
Summary
This is version 1 of the panel, I will add the holes for mounting as soon as I get a chance. This was designed to use with the case linked below and has had everything moved to accommodate the stock opening on the K40 laser itself.
https://www.thingiverse.com/thing:87250 -
“Ash”, or a close facsimile thereof 3D Print Model
Summary
I don’t want to step on any toes, so he’s not a 100% faithful reproduction of Ash. But, he’s got a boomstick, a chainsaw for a hand, and prints ok at 50-55mm scale.
I included the .blend and graphscad .scad saves if you want to remix it. The character is from makehuman, so composed of multiple meshes.
The boomstick is done in SCAD then moved to blender for sculpting.
The chainsaw was done in SCAD and brought over to blender for compositing with the other models.
Print Settings
Printer:
Bender (RAMPs on a Monoprice Mini) Rafts:
Doesn’t Matter Supports:
Yes Resolution:
0.13125 Infill:
5% Notes:
You can increase the infill if you like for a heavier figurine. -
Facile à imprimer maquette avion jet T33 esc: 1/64 3D Print Model
Facile à imprimer maquette avion jet T33 esc: 1/64
-
A 3D model of residential buildings in the meeting room 3D Model
There are three versions of the file format: 3DSMAX2014 format 3DSMAX2011 format FBX format
-
Battery model Free 3D Model
A basic textured UV unwrapped model of a Duracell AA disposable battery. featuring realistic materials. High quality textures combined with smart smoothing tools allow for a low poly yet still high detailed model.
-
3D Business Leather Bag Dr.Koffer + suit and shoes 3D Model
In the archive files max 2013 vray, corona, fbx, obj, vray_mat More clothes and shoes in my profile.
-
Camera Smena 3D Model
Camera Smena is a series of low-cost 35 mm film cameras manufactured in the Soviet Union by the LOMO factory from 1953 to 1991.Technical characteristics of the 3D camera:[GEOMETRY]- Low-poly model a product ‘Camera Smena’Originally created with 3ds Max 2014 and rendered with Marmoset toolbag 2. Renders have no postprocessing.In Editable Poly:Squares – 2.946Vertex – 3.788Triangles absent.In Editable mesh:Triangles – 5.892 (Optimization modifier not used)Vertex – 3.786***************************************File Formats:- 3ds Max 2014- 3ds Max 2016- OBJ – FBX- 3DS – Cinema 4D ***************************************Textures Formats:- (.jpeg.png) 4096 x 4096- (.jpeg.png) 2048 x 2048- (.jpeg.png) 1024 x 1024- (.jpeg.png) 512 x 512- (.jpeg.png) 256 x 256!Normal map resolution only JPG 4096 x 4096!***************************************[USAGE]- The model corresponds to real life dimensions (size & scale)- 3ds Max models are gathered in one group, and objects are logically named for ease of scene management.- No third-party renderer or plug-ins- Coordinates of the location of the model in space (x0, y0, z0)- Files with the model do not contain extraneous or hidden objects (lights, cameras, etc.)- Units: cmDimensions:Width – 5,2 cmLength – 11.5 cmHeight – 7,3 cm
-
Mi 24 A 3D Model
Ми-24А (изделие 245) -серийный вариант, по сравнению с опытными машинами удлинена кабина, изменено крепление ПТУР (на подкрыльевых пилонах). Выпускался в 1971—1973 годах. Построено около 250 штук. На первых представителях этой серии рулевой винт располагался с правой стороны. В поздних вариантах Ми-24А рулевой винт был перенесён на левую сторону, и оставался там на всех последующих модификациях.
-
A 3D model of folk architecture in the middle ages 3D Model
There are three versions of the file format: 3DSMAX2014 format 3DSMAX2011 format FBX format
-
A 3D model of bedroom suite in ancient Europe and the United States 3D Model
There are three versions of the file format: 3DSMAX2014 format 3DSMAX2011 format FBX format
-
Photo realistic highly detailed 3d model of eastern woman (Tia Carrere) 3D Model
Photo realistic highly detailed 3d model of eastern woman (Tia Carrere)The model is suitable for use in high-definition broadcasts, advertising, etc. A model with the correct topology. Standing pose, created in Zbrush 4r7 and exported to 3d max. The model is applied modifier morpher, (can be returned to ‘zero’ position is suitable for animation), the number of polygons – 29192, texture size: 4000 px, character assigned material Vray Skin mtl, SSS (SubSurfaceScattering) Vray realistic skin shader 3.0, the hair on the spline-based hair and Fur, the model is suitable for animation, as well as the perfect choice for the ‘revival’ of scenes of interiors, exteriors and other scenes (important! to render Vray hair in the options (hair rendering options) must be mr prim! Render scene Render Elements connected to, and collected from layers in Photoshop. I hope you enjoy Oya model
-
3D A 3D model of a lonely little house on the road 3D Model
There are three versions of the file format: 3DSMAX2014 format 3DSMAX2011 format FBX format
-
3D A 3D model of the ancient civilized desert temple building 3D Model
There are three versions of the file format: 3DSMAX2014 format 3DSMAX2011 format FBX format
-
A 3D model of the ancient passageway building 3D Model
There are three versions of the file format: 3DSMAX2014 format 3DSMAX2011 format FBX format
-
3D A 3D model of the interior of the hotel model 3D Model
There are three versions of the file format: 3DSMAX2014 format 3DSMAX2011 format FBX format
-
3D A Letter Pendant for Man and Women Jewelery Pendant 3D print model model 3D Model
A Letter Pendant for Man and Women Jewelery Pendant 3D print modelA Letter Pendant for Man and Women Jewelery Pendant Sizes:W: 27.93 mm H: 24.28 mm Gems : 1.73 mmIf any question please dont hesitate write me..Other Programs+Rhino 4.0 + 3D Max 2012 (Vray materials 1. Gold and 2.Diamond .mat) + 3DS + FBX + OBJ + STLThank you for advance..
-
A 3D model of the gate of the ancient building 3D Model
There are three versions of the file format: 3DSMAX2014 format 3DSMAX2011 format FBX format
-
A 3D model of the five-colored prayer flags of the Tibetan buddhist pagoda 3D Model
There are three versions of the file format: 3DSMAX2014 format 3DSMAX2011 format FBX format
-
Opel Rekord (C) Caravan 1967 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
Mebi 130 – a 130mm fpv quadcopter frame 3D Print Model
Summary
I crashed and broke my Youbi 130 frame, so I decided to design and print a new one. The frame I made is an X style quadcopter that fits all of the electronics from an “Awesome Youbi 130”.
The weight of my printed frame was 36.1 grams. I will see if I can get weight lower and frame stronger. I just printed the first one and am testing it now. Seems great, but I haven’t crashed it too badly yet 😉
Electronics:
Flight controller -https://www.banggood.com/Youbi-XV-130-F3-Flight-Controller-Integraded-25mW-200mW-400mW-40CH-5_8G-VTX-FPV-Transmitter-p-1134566.html?p=WL2504207536201306OF (Any standard size FC will work. The AIO saves space nicely.)
Speed Controllers -https://www.banggood.com/Youbi-XV-130-PDB-XT60-Integraded-4-in-1-BLHeli_S-20A-ESC-Power-Distribution-Board-for-FPV-Micro-Race-p-1134565.html?p=WL2504207536201306OF 4 in 1 20A ESC (any similar size 4 in 1 esc should work)
Motors -https://www.banggood.com/Youbi-XV-130-XV-130-1306-3600KV-Mini-Micro-Motor-2S-4S-For-FPV-Racer-p-1119162.html?p=WL2504207536201306OF 1306 Brushless 3600kv
Propellers –
Up to 3″
I am working on the camera hood now and will post it once I make on that I like.
Thanks for looking!
Print Settings
Printer:
Malyan M180 Rafts:
No Supports:
No Resolution:
0.2 Infill:
100%
How I Designed This
I used a free design program called designspark mechanical -
Cage medieval 3D model 3D Model
Model of a Cage medieval.Created in 3d max 2016.Texture set: one 4k texture Vray(Diffuse,Glossiness,Height,ior,Normal,Reflection).PBR (Base_Color,Height,Metallic,AO,Normal,Roughness)Includes Formats FBX and OBJ .Render:Marmoset toolbag,and vray.
-
Quaker 3D model 3D Model
In this decorative set, there are all models (including laminate and pano) that are presented on the render. This set is ideal for the interior: a cafe, restaurant, living room, etc.Excellent render to you
-
Opel Rekord (C) Caravan 1967 3D Model
The 3D model was created on real car base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* tire’s texture is not included in the set.* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
A 3D model of the eroded old buildings 3D Model
There are three versions of the file format: 3DSMAX2014 format 3DSMAX2011 format FBX format
-
3D Sony Xperia A4 SO-04G Blue 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
Outdoor Power Box 01 3D Model
ABOUT MODEL:-* This is a detail 3d model with Texture.* Model is suitable for use in games.* Real world scale and exact proportions.* The model has a different topology and realistic textures.* All objects are named and organzied with layers.* No detailed interior included, only basic walls.MATERIAL & TEXTURE:-* All materials in Multi Sub-Object.* Material and Texture setup is included in vray and scanline version.* UVW Mapping are applied.* All textures are in defuse map.* Textures can be easily repaint.LIGHTING:-* Studio setup is not included.FILE FORMAT:-* 3DS* FBX* OBJ* MAX (Vray Version)* MAX (Standard Version)* Native file is 3ds Max 2009(.max)* Other formats were converted from the MAX file.OBJECTS:-* Same material objects are attached and group for easy selection.* All objects are unique named.WARNING:-Depending on which software package you are using.The exchange formats(obj, 3ds and fbx) may not match the priview images exactly.Due to the nature of these formats, there may be some textures that have to beloaded by hand and possively triangulated geomatry.please check out my catalogue for more hires and realistic models.if you like this model I would kindly ask you to rate it.this is a computer generated 3d model – it is not a real life object.
-
3D A-Wing Free 3D Model
This is a low poly A-Wing (interceptor) suitable as a game asset.Contains FBX and unity package format. Textures, normal and emissive maps are included. Engine effects are only in the unity package format.The screen shots are showing the unity package, if importing the FBX provided textures and maps may have to be applied manually.
-
T door holder receiver for a trailer door 3D Print Model
Summary
The receiver part of a t style holder on a trailer.
My first creation. Hopefully someone can find it useful.
Print Settings
Printer Brand:
FlashForge Printer:
Creator Pro Rafts:
No Supports:
Yes Resolution:
0.2 Infill:
100 -
Wicker baskets 3D Model
In this decorative set, there are all the deli that are on the finished preview, including the background, the parquet board, the doors.Excellent rendering!
-
A 3D model of a stone farm house 3D Model
There are three versions of the file format: 3DSMAX2014 format 3DSMAX2011 format FBX format
-
Camera Smena 3D Model
3D model of Camera ‘Smena’Smena is a series of low-cost 35 mm film cameras manufactured in the Soviet Union by the LOMO factory from 1953 to 1991.Technical characteristics of the 3D camera:[GEOMETRY]- Low-poly model a product ‘Camera Smena’Originally created with 3ds Max 2014 and rendered with Marmoset toolbag 2. Renders have no postprocessing.In Editable Poly:Squares – 2,946Vertex – 3,788Triangles absent.In Editable mesh:Triangles – 5.892 (Optimization modifier not used)Vertex – 3.786***************************************File Formats:- 3ds Max 2014- 3ds Max 2016- OBJ – FBX- 3DS – Cinema 4D ***************************************Textures Formats:- (.jpeg.png) 4096 x 4096- (.jpeg.png) 2048 x 2048- (.jpeg.png) 1024 x 1024- (.jpeg.png) 512 x 512- (.jpeg.png) 256 x 256!Normal map resolution only JPG 4096 x 4096!***************************************Dimensions:Width – 5,2 cmLength – 11.5 cmHeight – 7,3 cm[USAGE]- The model corresponds to real life dimensions (size & scale)- 3ds Max models are gathered in one group, and objects are logically named for ease of scene management.- No third-party renderer or plug-ins- Coordinates of the location of the model in space (x0, y0, z0)- Files with the model do not contain extraneous or hidden objects (lights, cameras, etc.)- Units: cm- Preview rendered in marmoset toolbag 3
-
A 3D model of a large residential building 3D Model
There are three versions of the file format: the 3DSMAX2014 format 3DSMAX2011 format FBX format
