Summary
This guide have to be used with (semi)pro rotary tools with 36mm “collar” like Hilda or Profil. Also you need cutting disk 32mm or more (50mm in my case) in diameter and M4x20 with nut.
Angle is 120 degrees with relif angle of 5 degrees.
Направляющая для заточки сверел для полупрофессиональных граверов типа Hilda или Профиль. Для работы (помимо гравера) потребуется так же отрезной диск 32 или более (я использую 50) миллиметров в диаметре, и винт M4x20 с гайкой.
Угол заточки составляет 120 градусов (универсальный), с задним углом 5 градусов (таким образом режущая кромка первая соприкасается с материалом, и сверло сверлит, а не скользит задней поверхностью РК по материалу).
Category: Free 3D Models
Free 3D models ready to be used in your CG projects such as films, visualizations, games, VR etc. All 3D Models and Free 3D Print Models are available for download in several formats including .MAX, .STL, .FBX, .3DS, .C4D, .OBJ, .BLEND, .DWG, .DXF, .LWO and much more. If you’re in search of high-quality Free 3D assets, we have a huge library of 3d models for all your needs. Also you can visit 3D Models and 3D Print Models category.
-
Drill bit sharpener for (semi)pro rotary tool (36mm) with relief 3D Print Model
-
Part Remover 3D Print Model
Summary
i have used this for a while now, i put the razor blade on the corner of a print and tap the square with my baby hammer. Parts pop right off with no issue, be careful not to damage the print you’re removing.
Print Settings
Printer:
Anet A8 Rafts:
No Supports:
No Resolution:
.2 Infill:
50% -
Kanger toptank mini portection 3D Print Model
Summary
made for to protect my kanger toptank mini from fallings 🙂
Print Settings
Printer:
anet a8 Rafts:
Doesn’t Matter Supports:
Yes Resolution:
0.2 Infill:
30 -
Corolla AE86 (Revised) Free 3D Model
This is second version of my original Corolla AE86 blend which got rejected because it had trademark logos in texture. In this revised version I changed the logos and also made a wide body kit (but the wide body mesh is not uv unwrapped, it shouldn’t be hard to unwrap it if you follow how I unwrapped the stock model in the blend). All the logos: BLENDER, sparc, N0S, Turbocharged, SPEEDCRUSH, SONIC, arc and the big D logo on sides are made up, fictitious and have nothing to do with real life even if they might coincidentally look like any real logos I am unaware of. It’s low poly and it’s interior is simple mesh (used only to fill the space). That being said, hope you like it!
-
Suzanne head rigged (+ facial expressions) Free 3D Model
This model is based on a reworked version of “The Monkey” by Kursad Karatas :
-
Alien Creature Free 3D Model
An alien creature that has texture and a rig. Hope someone finds it useful.
-
Concord Stagecoach v3 Free 3D Model
This is version 3 of the stage coach: the first two uploads failed because of missing textures. I combed over this model for the third upload attempt and apologize to the community if I screwed up again!
-
Chips bag Free 3D Model
just a simple chips bag (modeled and textured in blender 2.79)
I forgot to edit the topology ( its unnecessary High res), sorry about that. -
Rolltop Desk Free 3D Model
I picked up a free model on Renderosity in 2010 that had been created in 2002, of a rolltop desk. Lately, I decided to move it to Blender, where I updated the topology, and made some changes to the design. Since the original creator made it clear in his readme that the model was for non-commercial purposes only, and that he would like some compensation if the model was otherwise used, I tried to get in touch with him, because I would like to share the new version of the desk, with his restrictions on use.
-
Gadget Wall Mount 3mm Remix 3D Print Model
Summary
Original Credit to PrintTo3D’s Gadget Wall Mount found here: https://www.thingiverse.com/thing:4738
I did printed off his original thing but it ended up breaking on me due to the holes being to small for the screws I was using while I was trying to drill them out to make them bigger. I also created bigger openings on the bottom so I could fit my usb-c charger to my phone while it sat in the holder.
Remixed to make the holes a little bigger to 3mm, dropped the holes down a little bit from the top for more stability, and I ended up cutting off the diagonal front in case someone wants it and doesn’t have a long screwdriver, as it accomodates shorter fatter ones vs precision screw drivers.
Print Settings
Printer:
Maker Select v2.1 Rafts:
Doesn’t Matter Supports:
No Resolution:
.1 Infill:
100 Notes:
I suggest 100% infill. -
Nerf Retaliator Picatinny Rails 3D Print Model
Summary
This was my attempt to make a full length picatinny rail for the retaliator. I believe that the body rail needs to be reduced by 2mm in height to be flush with the barrel rails.
This part requires the elimination of the Nerf rails on the front retaliator barrel. -
The Gangster Support 3D Print Model
Summary
The Gangster Support
Made by Abhi_Le_Createur
-4 inclinations
-Made for 10.1” Tablets (Galaxy tab 4) but fits most phones and tablets in at least one inclination.
-0.2mm layers for best result.
Thanks. -
Homebrew Beer Pin Lock Keg Gas Depressurizer 3D Print Model
Summary
Used to release pressure from a Pin Lock Cornelius keg that doesn’t have a pressure release valve built into the lid. Simply twist it in place and it will keep the gas poppet depressed and allow the pressure to vent through the post.
I printed this with 20% infill using Makergeeks Raptor PLA and it works well. -
Wallet and Key Holder for Small Wallets 3D Print Model
Summary
I couldn’t find one that really fit my usecase so I designed my own! This is designed for very slim wallets or money clips at or around 18mm. I used Scotch Extreme mounting tape to mount it to the wall. I hope this is as helpful to you as it is to me!
Print Settings
Printer Brand:
Wanhao Printer:
Wanhao Duplicator i3 Plus Rafts:
No Supports:
No Resolution:
.2 Infill:
20 -
Densen B-420 XS CD Player audio speaker 3D Collection
Densen B-420 XS CD Player audio speaker 3d Models
-
Leap Motion and LED stand 3D Print Model
Summary
Leap motion sensor holder with LED set facing user.
This is to part of an installation in which a D/VJ uses the Leap sensor to control audio/video art while facing an audience. The LEDs light up the user, while the organic shape of the sensor holder hides the electronics from the audience.
The Leap motion sensor can be titled to optimize its orientation towards the user, the cable is routed to the left through a slot. A hole in the base is added to route additional cables powering and controlling the LEDs
The Leap sensor holder is adapted from https://www.thingiverse.com/thing:1535393. -
Sriracha Inverter 3D Print Model
Summary
Friends don’t let friend waste Sriracha. This is a small stand to invert a Sriracha bottle so you don’t have to wait for the half-empty contents to flow to the nozzle. -
Nokia/Withings Steel HR 36mm support/charger 3D Print Model
Summary
i remix this for my 36mm steel HR and for closed bracelet
2x m3x10(min) screw
Print Settings
Printer:
c-bot Rafts:
No Supports:
No Resolution:
what you want -
Dragon Clan Families 3D Print Model
Summary
Dragon Clan Family Mon as pictured by L5R Wiki -
Lego Duplo Train Turntable 3D Print Model
Summary
This train turntable is designed to work with Lego Duplo trains with both narrow and wide wheels. One can print any combination of the left and right pieces to create a 2, 4, or 6 way turn table. Enjoy! -
GT Honeycomb Logo 3D Print Model
Summary
Created by extruding the SVG generated by a trace bitmap function of inkscape on the original logo. The extrusion is 2mm but the X-Y size is a bit large so make sure it fits your print bed before slicing. -
Curtain 3D Model
Additional Info: Curtain roman N230517 – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
INDUSTRIAL REFRIGERATION VALVES REG SCA 3D Collection
INDUSTRIAL REFRIGERATION VALVES REG SCA 3d Models
-
The Genius Garnet 3D Print Model
Summary
I’m a big fan of Korean variety show The Genius, where these cubes called “garnets” are used as in-game currency. I decided to design and 3d print some of my own -
Aim Controller Hanger 3D Print Model
Summary
I created this to hang my Playstation VR Aim Controller from a cabinet door. Most existing models available are for a horizontal position, which wouldn’t fit my door. This will allow the controller to hang from the bottom rear corner without strain.
There is a hole for a screw, but I just hung mine with 3M command strips.
This can be printed as is, without supports.
Print Settings
Printer Brand:
Robo 3D Printer:
R1 ABS + PLA Model Rafts:
No Supports:
No Resolution:
.38 -
Merlon con saetera v2 3D Print Model
Summary
Merlón con saetera, para Exin castillos. El los lados tiene unos soportes por si queremos añadir un mantelete. -
Wall mount for Ps4 Slim 3D Print Model
Summary
Finding nothing satisfing on my search for a PS4 Slim Wallmount I made my own version.
After mounting slide your PS in from right to left side. You will find it easier to get rid of the rubber stands befor sliding the PS in.
Print Settings
Printer:
Anet A6 with SkyNet Supports:
Yes Infill:
20% -
Zumspot Case for Raspberrypi 2 &3 3D Print Model
Summary
This fits on top of this excellent case from Esquilo.
https://www.thingiverse.com/thing:1637227
I tried to integrate it with the top case but my printer couldn’t handle it, so it’s just a simple design that fits on top of the case for a raspberrypi 2 or 3 if anybody needs such a thing.
Print Settings
Printer:
Flashforge Finder Rafts:
Doesn’t Matter Supports:
Doesn’t Matter -
CGC Classic: Magic Wand Particles Free 3D Model
Celebrating CG Cookie’s 9th Anniversary we bring you some of the first Blender tutorials that paved the way for our Blender instruction!
-
Koo Koo Clock Free 3D Model
Koo Koo Clock
hour hand drives by minute hand.
rig layer contains 3 drivers, koo koo action/koo koo slider action, pendulum and also the lattice
I replaced render input layer with input image, thumb_3,
loaded the other thumbnails into the uv editor
cheers -
Couch Sofa Release Lever Slip-on Replacement Fix 3D Print Model
Summary
The release lever for my couch snapped-off, so I designed this fix for it. Since a “stub” of the original lever still remained, I designed this thing to slip on over the remaining stub. Printed in black PLA to match the couch, though I realize this makes it a bit hard to see in the photos.
The first photo shows the printed part attached to the couch. The second shows the “stub” that the printed part fits over. The third is a reference photo of a still-intact release lever. The fourth is just the part by itself.
Print Settings
Printer Brand:
Prusa Printer:
Prusa Clone Rafts:
Doesn’t Matter Supports:
Yes Resolution:
0.1 Infill:
20
How I Designed This
Fusion360. The .f3d file is included if you wish to tweak it based on the specifics of how your handle broke. -
replacement sterilite container clip 3D Print Model
Summary
I buy lots of these sterilite containers. I imagine a lot of 3D printing hobbyists do. Frequent usage means the clips eventually break. Instead of having to spend another $5 – $12 dollars and throw away a perfectly good container, I drafted a replacement clip.
I know it’s lame, but I use a lot of them and it is wasteful to have to purchase again. The attached image is the container where I keep my coffee. Of course that’s going to break first, using it everyday for over 2 years.
PLA
.3mm Draft
No Support
Hollow / Shell, No Infill
With these basic settings the printed design is stronger than the factory clip. -
Simplified Pikachu 3D Print Model
Summary
Modified the original design so that it is easier for cutting out dough without having to worry about it getting caught in the cracks.
Print Settings
Rafts:
No Resolution:
.15 Infill:
10 -
Eva Duarte 3D Print Model
Summary
Busto de Eva Duarte modelado en Blender para impresión 3d. Odio la política y a sus participantes. -
Gravity Claw with holes for M5 bolts 3D Print Model
Summary
This is an edit of a Gravity claw made to work with M5 bolts (same as a quadcopter motor) -
House 3D Model
Additional Info: House N180917 – 3D model (*.gsm+*.3ds) for exterior 3d visualization.
-
Lego 4949 Blue Buggy Free 3D Model
Original LEGO 3D Model————————————–Set Number : 4949Name : Blue BuggyYear : 2006Theme : RacersPieces : 24Category : CarCorrected Materials : YesAnimation Wheels : Yes
-
AK214 lipo protect 3D Print Model
Summary
It is a small modification of a piece to protect the lipo from the screws of the bottom of the frame.
Print Settings
Printer:
Anet A6 Rafts:
Doesn’t Matter Supports:
No Resolution:
0.2 Infill:
40% -
Modular 28mm Scale Ships ~ Expanded 3D Print Model
Summary
Make 28mm Scale ships for all you RPG needs. The
“Blimp” part can be tied to the “Upper Deck” part to make it appear more realistic and secure. The mast can hold a cloth for a sail. More coming soon to: https://www.thingiverse.com/OfAMillionProblems/collections/modular-ships -
Zonestar P802QR2 Simple X Belt 3D Print Model
Summary
Furos adaptados para parafusos de 4,8mm ( o buraco têm cerca de 5,0mm)
Usei arruela e porcas do lado de dentro, para que ao apertar o parafuso force o metal da arruela e porcas e não o plástico.
Print Settings
Printer:
Zonestar P802QR2 Rafts:
No Supports:
Yes Resolution:
0,2 Infill:
40 -
Bronco Concept Wheels 3D Print Model
Summary
I’ve been working on the Bronco Concept truck for a bit and thought I’d upload the wheels.
They are for 1.9 tires. For each wheel, print 2 rings.
I printed mine at .12 to make nice and smooth.
The rings I printed at .24.
Print Settings
Printer:
Creality CR-10 Rafts:
No Supports:
Yes Resolution:
.12 Infill:
70% -
Lego 3D Print Model
Summary
My first printed Lego. Extend the inner part of the bottom a little bit so it could be perfectly clutch with other. -
cable homework 3D Print Model
Summary
cable holder
Print Settings
Printer Brand:
Prusa Printer:
Prusa Mk2 Rafts:
No Supports:
No Resolution:
.1-.2 Infill:
50% -
Charizard (Minimal Supports) 3D Print Model
Summary
Plane cut the bottom to create a uniform flat surface and added supports in MeshMixer -
Krill Bust 3D Print Model
Summary
3D Fan Art of a Krill from The Orville
Print Settings
Printer Brand:
3D Systems Printer:
Cube 3 Rafts:
No Supports:
Yes Resolution:
.150 mm Infill:
20% -
Rock Climbing Stick Clip with pole threads 3D Print Model
Summary
This is a remix of https://www.thingiverse.com/thing:870219
I added threads for a painters pole or broom handle. I also combined it into one file so there is no need to glue it together.
Print Settings
Printer Brand:
Wanhao Printer:
Wanhao Duplicator i3 Plus Rafts:
No Supports:
Yes Resolution:
.2mm Infill:
20% -
wall mount for the remote from a Phillips 55PUS7181 3D Print Model
Summary
simple wall mount for the remote of a Philips 55PUS7181 TV
Print Settings
Printer:
Anet A8 Rafts:
No Supports:
Yes Resolution:
0.15 mm Infill:
100% -
BBS Moda M2 scale1/4 3D Print Model
Summary
Printed with 0.4 mm nozzle!
Follow me on twitter -> https://twitter.com/a_kuhta
You can donate some $$$ -> paypal.me/all3n2017
Thank you 🙂 -
REI Kingdom Table Center Support Pieces 3D Print Model
Summary
I bought an REI Kingdom table at the REI garage sale for $20. The table came with 4 cross-members for the ends. It should have come with 2 cross-members for the ends and 2 center cross-members with locating pins. I took some pictures of the correct pieces in the store on another table and designed replacement locating pins in Tinkercad for the center cross-members. I printed at 40% in-fill with supports. I then modified two of the end pieces by cutting off the end tabs, drilling holes for my part, and riveting them on. It works perfectly. Good as new and saved $80. -
Ceres New Yen 50 – Laser Cut 3D Print Model
Summary
Joining the OPA to fight for belters rights? Searching for missing persons on the Scapuli? Whatever your reason for crossing the black to Ceres, make sure you’ve got your New Yen.Laser Cutting
This is designed with both a front and a back. The front contains the text and frame while the back has only the artwork. Ceres station is split in half with one half on the front and one on the back.
Cut using 3mm acrylic. When printing the back, I just adjusted the alignment by sight. -
Small Parts Drawer Insert 3D Print Model
Summary
A more robust divider system for small parts cabinets. This parametric insert allows for creating custom inserts with multiple sections.
The model uses OpenSCAD to add divider walls to an existing STL model. Ensure “base.stl” file is included and located in the same folder as the “Small_Parts_Drawer_Insert.scad” file, otherwise you won’t get the majority of the model. -
Miniature Halloween Signs 3D Print Model
Summary
This has 3 miniature signs that are printed on boards. They have a Halloween type them of monsters or warnings. The signs consist of a post with holes and two pegs along with a base. A sign board that is blank is also provided so you can paint your own words and attach to the bases. The bases have stone designs with a wood support beam. Note that the hole in the bases for the pegs will have to be cleaned out. The signs have holes also that are the same size as the pegs that need to be glued to the signs. Note these holes may need to be cleaned out as well before superglueing.
The signs can be set up to be snapped into the bases or you can just superglue them permenantly to the bases.
Print Settings
Printer Brand:
PowerSpec Printer:
PowerSpec 3D Pro Rafts:
No Supports:
No Resolution:
0.2 Infill:
15% -
Vase 3D Model
Additional Info: Vase pion flowers N240517 – 3D model (*.gsm+*.3ds) for interior 3d visualization.
-
Little demoness 3D Print Model
Summary
Shortened the hair to not interfere with the wings.
Print Settings
Printer:
Micromake D1 Rafts:
Yes Supports:
Yes Resolution:
0.2 Infill:
10 -
Tie Fighter Pilot Chest Box with Dark Side Cookies 3D Print Model
Summary
This is a remix I made from the Tie Fighter Pilot chest box by Jace1969. I made a removable dark side cookie holder and scaled some cookie cutter designs that were on Thingiverse, so that they fit perfect in the holder. (Everyone knows the Empire has cookies, unlike those Rebel scum). Added that knurled knob on the front.
-The back writing translates to “property of Galactic Empire”
-2 gears should be printed, and attached with 5 min epoxy or whatever adhesive you trust.
The slot in the middle is to fit a Samsung S7 cell phone, as I made this for a friend’s costume. Just drop your phone in and you can play the Imperial March as you walk. Or feel free to modify this to allow you to take video with your phone as you walk through comic cons.
I am placing a battery holder in the lid so I have ran a simple channel up the wall to allow the 26awg wires from the LED to the battery/switch to be held in with a bit of hot glue. It
holds good and if you ever have to take the wires out, I find it comes off easy enough too. The LED holes are sized for 5mm – blue and red super bright LED. Blue on left and red on right as per movie screenshots. I will be using 5 min epoxy for that. A bit of hot glue on the top and it will diffuse it perfect.
I never put in a switch hole to activate the two LED because wasn’t sure which switch i would be using so going to just drill one wherever I decide. 9V battery will run the 2 LED for a long time, 2 years give or take.
Hope ya enjoy and I will post pictures here when it is done. Cheers from Canada…eh!
Print Settings
Printer Brand:
Prusa Printer:
Prusa Clone Rafts:
No Supports:
Yes Resolution:
.2 or better Infill:
20% -
Fidget Spinner Case 3D Print Model
Summary
I designed this to fit
this fidget spinner along with four of the same ball bearings -
Kossel 1515 puley carriage upgrade 3D Print Model
Summary
Your carriages are bending?
There’s a solution !
These parts stops the bending by tightening the wheel from both sides.
You’ll need a M3 screw (M3L20 is nice) and a Nylock nut.
Instructions:
Replace all the nuts on the screws.
You’ll need 3 washers to replace a nut, -
Waterfall 3D Print Model
Summary
My sister has made a Fairy Herb Garden for her daughter and wanted a waterfall. I made her a solar powered pump from some components I had left over from an automatic tomato watering project I was working on. The project can be seen on her blog at https://craftinvaders.co.uk/making-a-solar-powered-waterfall-for-our-fairy-herb-garden/
Although this system worked pretty well we wanted to upgrade the waterfall to a higher flow rate and so she purchased a cheap solar power water pump designed for small ponds and I designed and made this.
Please note that you will need to punch through the hole from the tube connector to allow the pump to fill the reservoir. -
CGC Classic: Creating a Lightbulb Free 3D Model
Celebrating CG Cookie’s 9th Anniversary we bring you some of the first Blender tutorials that paved the way for our Blender instruction!
-
300ZX Clock replace with USB 3D Print Model
Summary
This replaces the clock in the 300ZX radio bezel. I created it to allow for an aftermarket head unit to pass through a USB port -
Thank you #TrevorForget 3D Print Model
Summary
A thank you print for DerbyCon and the ethical hackers that took part of #TrevorForget. For details about this visit: https://www.ksl.com/?sid=45957914&nid=148 -
PocketNC motor fan holder 3D Print Model
Summary
Holder for a 60mm fan so the CNC motor does not get too hot when running.
It’s just snaps on. The one you see on the pictures was printed on ABS. -
Anet A8 Geometric Face 3D Print Model
Summary
Made to fit with the T-braces and top-mount spool brake I designed. All the holes line up pretty well, just little modification to fit the top, left, and right buttons. I’ll eventually fix and update the files. -
Bag Filler 3D Print Model
Summary
Just a quick design I drew up for a friend that needed to pack bags. -
Church 3D Model
Additional Info: Church N140917 – 3D model (*.gsm+*.3ds) for exterior 3d visualization.
-
80 Series Toyota Land Cruiser floppy vent fix 3D Print Model
Summary
Like many, the vents in my FJ80 are loose from the tabs breaking off. In my case, the “pins” on the vents themselves were sheared off, and the small plates that the pins mate with crumbled when I took them out.
I’ve designed a 3D printable part that fits securely into the vent housing, and has a pin that now fits a hole drilled into the vents themselves. Here’s a render for the middle vent. (the side needs a slight offset.) Dimensions in mm. -
Turtonator Fidget Spinner 3D Print Model
Summary
Made by request for a friend’s nephew, modeled off the critter’s back.
Print Settings
Printer Brand:
MakerBot Printer:
MakerBot Replicator 2 Rafts:
No Supports:
No Resolution:
.30mm Infill:
10% -
Smartphone & Tablet Charging Station 3D Print Model
Summary
The Smartphone & Tablet Charging Station dimensions are 20 x 13 x 6 mm.
I 3dprinted with CTC Bizer (a clone of Makerbot) at 0.30 mm resolution. The bottom required around 13 hours and the top around 7 hours.
My advice is to reduce the top to 99%, in order to facilitate insertion and removal.
I ordered this multi USB charger on Amazonhttps://www.amazon.it/gp/product/B00MOAJ50A/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
You can choose between 3 kinds of bottoms: with or without divider or with Aukey divider.
You can choose between 6 kind of tops depending on the number of holes you prefer. My advice is to use the 4 x 2 or 4 x 3 stl files.
Print Settings
Printer Brand:
MakerBot Printer:
MakerBot Replicator Resolution:
0.30 Infill:
10% Notes:
3 shells
How I Designed This
Coded with OpenSCAD -
Amor and Psyche Free 3D Model
Amor and Psyche or Cupid and Psyche, A28, plaster version of the statue in marble (A27), Thorvaldsen original model from 1807. Thorvaldsen Museum (Copenhagen, Denmark). Made with Memento Beta (Now ReMake) from AutoDesk.
-
ESP8266 Platform 3D Print Model
Summary
ESP8266 PCB Platform that I use to mount ESP8266 12E PCB in box. Posts on platform are high enough to allow programming board when mounted. I used silicon to mount platform in box, it seems to work well -
Pumpkin_CandyDish 3D Print Model
Summary
As a FYI There is a License agreement with this Download and If you do download these STL file you are agreeing to the license.
Another TinkerCad object. Print with supports. I did have to sand the pin since it was really small. Scale to the size you want but, for now its small (the inner bowl is 1.3/4 inch Diameter X 3/4 inch Deep) for those who just want to print for fun.
General size if printed @:
200% (3 1/2 inch Diameter X 1 1/2 inch deep)
300% (5 1/4 inch Diameter X 2 1/4 inch deep)
400% (7 inch Diameter X 3 inch deep) -
Helping Hands Base/Workbench PSU 3D Print Model
Summary
This is a “Helping Hands Base” with built in Workbench Power Supply. It is still in beta, I have not printed it yet. The helping hands will be attached with holes in the top(I have not figured out placement yet). Attached to two of the helping hands will be a 80mm fan for soldering fumes. Please check it out and let me know what you think or improvements. Keep in mind, this is my first design ever using a Design Software. All self taught and Youtube videos.
Print Settings
Printer:
Tevo Tarantula Rafts:
No Supports:
Yes Resolution:
.2 Infill:
20% Triangular(for strength) Notes:
For the top I will be using 4 top and bottom layers for strength. Also, recommend Supports for the base. -
Hand Hanger (reupload) 3D Print Model
Summary
Reuploaded from https://pinshape.com/items/23952-3d-printed-hand-hanger-2-modified-from-danowalls-design
Not my design!
