3DHunt.co

Category: 3D Print Models

Premium & 3D Print models ready to be 3d printed. 3D Print Models and Free 3D Print Models are available for download in several formats including .STL, .3DM, .OBJ, .3DS, .DAE, .SKP, .BLEND, .DWG, .DXF, .STEP and much more. If you’re in search of high-quality 3D printed assets, we have a huge library of 3d print models for any of your needs. Also you can visit 3D Models and All 3D Models category.

  • Couple ring 3D Model

    Couple ring 3D Model

    2,5mm for couple ring. one for men and one for women

  • LG TV remote battery cover / Mando a distancia TV LG 3D Print Model

    LG TV remote battery cover / Mando a distancia TV LG 3D Print Model

    Summary
    The battery cover of our LG smart TV remote (model AKB73715634) broke after a couple of months. The design is flimsy, to say the least.
    I’ve sketched this quick replacement, it’s not perfect, but fits well and does its job.
    =====================================================================
    La tapa del compartimento de pilas del mando a distancia de nuestra smart TV LG (modelo AKB73715634) se rompió al cabo de un par de meses. Se trata de un diseño endeble, como mínimo.
    He hecho un diseño rápido de esta tapa de reemplazo, no es perfecta, pero se ajusta bien y cumple su función.
    Print Settings
    Printer Brand:
    Prusa Printer:
    Prusa Clone Rafts:
    Doesn’t Matter Supports:
    Yes Resolution:
    0,2 Infill:
    50%

  • Empire Love 3D Print Model

    Empire Love 3D Print Model

    Summary
    The Empires take on the classic Robert Indiana’s LOVE sculpture.

  • Holder for Weber iGrill2 3D Print Model

    Holder for Weber iGrill2 3D Print Model

    Summary
    I have a weber “Master Touch” Grill and a iGrill2 thermometer.
    The problem is where to place the thermometer during grilling. It has a magnetic base, but you cannot stuck it to the kettle, it is too hot.
    So I designed and printed a small mounting plate that clamps on the front leg of the grill.
    I used the little metal disc that was supplied with the thermometer.
    Print Settings
    Printer:
    DaVinci Mini w Rafts:
    No Supports:
    Yes Resolution:
    0.3 Infill:
    20% Notes:
    The biggest prowling is warping.
    The supports are needed for the metal plate.
    How I Designed This
    Designed with Tinkercad

  • Chip-E Electronics and Hardware 3D Print Model

    Chip-E Electronics and Hardware 3D Print Model

    Summary
    A scale sampling of all of the electronics in the RobotGeek Chip-E.

  • top case motocycle change part 3D Print Model

    Summary
    pièce de rechangez pour ouverture top case

  • Footballer 02 Footstrike 02 Stl 3D print model 3D Model

    Footballer 02 Footstrike 02 Stl 3D print model 3D Model

    Footballer 02 Footstrike 02 Stl 3D print model
    3d printable model of the footballer similar to Ronaldo player.
    Model has near 180mm height.
    2 Millions 3mf checked for errors and repared.
    10 Millions obj included and can be used to add some details.
    See details in netfabb analisys preview picture.
    Not for macro renders

  • RIng 5 diamond 4mm Free 3D Model

    RIng 5 diamond 4mm Free 3D Model

    RIng for 5 diamonds with 13 Japan size, good design, if you want change size, change diamond size contact me !!!!
    No fee for edit.

  • Footballer 02 Footstrike 01 Stl 3D print model 3D Model

    Footballer 02 Footstrike 01 Stl 3D print model 3D Model

    Footballer 02 Footstrike 01 Stl 3D print model
    3d printable model of the footballer similar to Ronaldo player.
    Model has near 180mm height.
    2 Millions 3mf checked for errors and repared.
    10 Millions obj included and can be used to add some details.
    See details in netfabb analisys preview picture.
    Not for macro renders

  • klein_bottle 3D Print Model

    klein_bottle 3D Print Model

    klein_bottle

  • 3D Football 3D Print Model

    3D Football 3D Print Model

    Designed by Augustin Flowalistik this football comes in three parts so you can easily 3D print it on your desktop machine.

  • VORON Tag 3D Print Model

    VORON Tag 3D Print Model

    Summary
    Tag for a VORON 3D Printer. Mounts directly to 20mm aluminum extrusion.
    Print Settings
    Rafts:
    No Supports:
    No Notes:
    Need to set your printer to pause for a filament change after 5mm. The base is 5mm and the lettering is 1mm thick.

  • 25560 Battery Holder 3D Print Model

    25560 Battery Holder 3D Print Model

    Summary
    This is a holder for the 26650 battery. The .STL model is for use with TPU or FLEXIBLE FILAMENT.
    This is because the holder can stretch to hold the conducting wires on the proper battery terminals. You can also hot glue this to the side of an enclosure as shown above. If you would like one for PLA, just leave a comment.
    Print Settings
    Printer Brand:
    Ultimaker Printer:
    Ultimaker 2 Rafts:
    No Supports:
    No Resolution:
    .200 Infill:
    20% Notes:
    Position the holder horizontally like shown on the print bed for easier printing.

  • 1515Bot 3D Print Model

    1515Bot 3D Print Model

    Summary
    I designed this printer in the fall of 2016 from a number of different existing printers. You’ll notice a bit of flavor from Prussa i3 and in fact I’ll link to a number of parts that I took from other creators to include in my eventual design, some with minor modifications. The printer uses a mix of 3/8in threaded rod and 1515 OpenBeam. I will provide a full part list in the future but for now here is some pro’s/con’s of this printer:
    Pros: cheap, easy to assemble, easy to print, relatively stable
    Cons: size is not configurable, 1515 OpenBeam available only online, plenty of screws
    https://www.thingiverse.com/thing:119616https://www.thingiverse.com/thing:587659

  • The RItual 3D Print Model

    The RItual 3D Print Model

    Summary
    Mashup of Oculus Rift’s Medium software builtin stamps and my own newbe attempts

  • Planter #3 3D Print Model

    Planter #3 3D Print Model

    Planter #3:

  • portafilter spout (single) 3D Print Model

    portafilter spout (single) 3D Print Model

    This is a single spout for the Gastroback Advanced Pro G portafilter (also available as Breville BES 860) designed to replace the double spout that ships with the machine.

  • DIY Dremel-Style Rotary Tool 3D Print Model

    DIY Dremel-Style Rotary Tool 3D Print Model

    There are plenty of DIY Dremel-style rotary tool ideas available on the internet but I couldn’t find anything that was powerful enough or usable in the long term, while looking good! So I decided to design and make my own 3d Printed Dremel-style rotary tool.

  • DRAWING 3D WARRIOR WOMAN 3D Print Model

    DRAWING 3D WARRIOR WOMAN 3D Print Model

    DRAWING 3D WARRIOR WOMAN

  • PERSONALIZABLE PENCIL CARD INTERSEAL-1 3D Print Model

    PERSONALIZABLE PENCIL CARD INTERSEAL-1 3D Print Model

    INTERSEAL
    ADD YOUR TEXT ON WWW.IBARAKEL.COM

  • 3D toys ladybird sailboat house two type hearts 3D Model

    3D toys ladybird sailboat house two type hearts 3D Model

    Simple, fun toys for fridge magnet, which can be made with a 3D printer. It has a 14 mm diameter outsole for magnet. Models untested.SK’Avius’ portfolio

  • Golden crown 3D Model

    Golden crown 3D Model

    Rating: 0.00,
    Vote(s): 0

  • Candle pendant 3D Model

    Candle pendant 3D Model

    CANDLE NECKLACE STL 3d model for 3d printing 3D print model
    CANDLE NECKLACE Model is fully ready for 3d printing of plastic, metal or jewelry wax and CNC!
    CANDLE NECKLACE STL 3d model for 3d printing.
    Recommended material – oxidized silver.
    The model consists of 2 parts
    silver 925 Sterling – 10 grams.
    Other sizes and format can be fabricated – it’s FREE, just let me know what size you want by using the contact designer button on the right.
    Any questions? Please contact me.

  • Demonrc Nox5 CommDock 3D Print Model

    Demonrc Nox5 CommDock 3D Print Model

    Summary
    This is a back panel for the Nox5 from Demorc that can hold Vtx and Rx in place. It is inspired by the MQC Fusion CommDock. Print in TPU or similiar material.
    Print Settings
    Printer Brand:
    MakerBot Printer:
    MakerBot Replicator 2 Rafts:
    No Supports:
    Yes Infill:
    15% Notes:
    Use TPU or similiar.

  • Flexing AA Battery Holders with Integrated Spring 3D Print Model

    Flexing AA Battery Holders with Integrated Spring 3D Print Model

    Summary
    Flexing battery holders with integrated spring
    It’s very easy to pass the wires with this version !
    The batteries are very well set in their housing.
    https://youtu.be/s4qXchk_GHA
    Post-Printing

  • 250er Quadrocopter with CC3D (v2) 3D Print Model

    250er Quadrocopter with CC3D (v2) 3D Print Model

    Summary
    Because of the first 250er Quad design was to heavy I designed a lighter one.
    Last parts are on the printer.
    Designed for 2204er Motors
    -12A Micro ESC 3S
    -3S 1000mAh Lipo
    -CC3D
    -50x50mm Power Distribution Plate
    -Orange DSM2 6CH RX

  • 5A-Biosphere-Katie,Kami,Luci 3D Print Model

    5A-Biosphere-Katie,Kami,Luci 3D Print Model

    Summary
    biosphere

  • Amna’s House 3D Print Model

    Amna’s House 3D Print Model

    Summary
    House

  • Bridal Ring Set 3D CAD Model In STL Format 3D Print Model

    Bridal Ring Set 3D CAD Model In STL Format 3D Print Model

    Model is fully ready for 3d printing of plastic, metal or jewelry wax.

  • Womens Jewelry 3D CAD Model Of Bridal Ring Set 3D Print Model

    Womens Jewelry 3D CAD Model Of Bridal Ring Set 3D Print Model

    Model is fully ready for 3d printing of plastic, metal or jewelry wax.

  • 3D Jewelry CAD Model Of Beautiful Wedding Ring 3D Print Model

    3D Jewelry CAD Model Of Beautiful Wedding Ring 3D Print Model

    Model is fully ready for 3d printing of plastic, metal or jewelry wax.

  • Fashion Jewelry 3D CAD Model Of Wedding Ring 3D Print Model

    Fashion Jewelry 3D CAD Model Of Wedding Ring 3D Print Model

    Model is fully ready for 3d printing of plastic, metal or jewelry wax.

  • Free !! 3D CAD Model For Solitaire With Accents Ring 3D Print Model

    Free !! 3D CAD Model For Solitaire With Accents Ring 3D Print Model

    Model is fully ready for 3d printing of plastic, metal or jewelry wax.

  • Threaded Airsoft Silencer 3D Print Model

    Threaded Airsoft Silencer 3D Print Model

    Summary
    Remixed liqdfire’s silencer and added 14mm CCW threads to screw onto my 1911 TAC. Current version threads are a little loose but if you tighten it all the way its fits fine.
    Print Settings
    Printer:
    Anet A8 Rafts:
    No Supports:
    No Resolution:
    0.2 Infill:
    20 Notes:
    Printed with Carbon Fiber filament a little to fast and my belts weren’t tight enough, woops.

  • Tarugo para pedal de embrague 3D Print Model

    Tarugo para pedal de embrague 3D Print Model

    Summary
    Tarugo para pedal de embrague de automotor, ver marca y modelo para imprimir. No esta testado.

  • Electric Skateboard Mount #SKATEFORCE 3D Print Model

    Electric Skateboard Mount #SKATEFORCE 3D Print Model

    Summary
    https://www.youtube.com/watch?v=pVH-GfD4Sfo
    For @PRESSRESET Giveaway

  • X-Axis Tensioner (Prusa) 3D Print Model

    X-Axis Tensioner (Prusa) 3D Print Model

    Summary
    A belt tensioner for the x-axis of my Prusa clone. The improvement it provides can be seen here. Assembly requires M3 nuts and screws (I used extra parts from my printer).
    Print Settings
    Printer Brand:
    Prusa Printer:
    Prusa Clone Rafts:
    Yes Supports:
    No Resolution:
    .1 mm

  • Tea Shirt – Tea Sachet Holder 3D Print Model

    Tea Shirt – Tea Sachet Holder 3D Print Model

    Enjoy a cup of tea with friends and impress them with this cute kit comprising a dispenser for bags shaped like a hanger and a practical support to prevent the edge of the bag from falling into the cup.

  • cookie cutter 3D Print Model

    cookie cutter 3D Print Model

    Here is a reversible cookie cutter, a circle on one side, a star on the other.
    For kitchen, pottery, modeling, …

  • Drum Blade Indesit 7kg IWE 71451B 3D Print Model

    Drum Blade Indesit 7kg IWE 71451B 3D Print Model

    Drum Blade Indesit 7kg IWE 71451B

  • CORK PALS: KING LION 3D Print Model

    CORK PALS: KING LION 3D Print Model

    Cork Pals are toys that utilize 3D printing and recycling. Use a wine cork to connect two 3D printed pieces.

  • Dig Dog Bowl 3D Print Model

    Dig Dog Bowl 3D Print Model

    Dog bowl 19 x 19 cm. You can decorate it by printing and pasting the letters of its name in 5 millimeters thick.

  • Hydroponic bucket 3D Model

    Hydroponic bucket 3D Model

    Self-watering hiydroponic bucket

  • Buckle watches Omega 3D Model

    Buckle watches Omega 3D Model

    for 16mm buckle, if you want change size, contact me ! Give you original file.

  • RIng 5 diamond 4mm 3D Model

    RIng 5 diamond 4mm 3D Model

    RIng for 5 diamonds with 13 Japan size, good design, if you want change size, change diamond size contact me !!!!
    No fee for edit.

  • New phone 3D Model

    New phone 3D Model

    I use my telephone with great peace of mind.

  • Power Ring 3D Model

    Power Ring 3D Model

    Handmade ring of gold and stones
    Dwg models
    sldprt models

  • water jet drive 3D Print Model

    water jet drive 3D Print Model

    Summary
    made for a water jet drive
    Print Settings
    Printer:
    Geeetech Mecreator 2 Rafts:
    No Supports:
    No Resolution:
    0.1 Infill:
    100

  • Endstop Mounting 3D Print Model

    Endstop Mounting 3D Print Model

    Summary
    This part is used for endstop mounting and designed to fit with 2020 alu profiles. It can used for various types of printers and has 4 holes to fit with M3 screws.

  • cylinder Maze 3D Print Model

    cylinder Maze 3D Print Model

    Summary
    Heyo

  • Pendant Pix 3D Model

    Pendant Pix 3D Model

    Pendant Pix 3D print model
    Pix 3D print model
    Model :Pix
    Size: Look Images Preview ;
    Gems: 33 pt. x 1mm
    Weight: ~ 2.24 gr Silver. ;
    Recommended materials: Silver, White Gold ;
    Format: STL.
    Printable
    Ready to print or cutting on CNC Machine.
    How open “STL” format:
    File -> Import -> *.STL
    All Printable or 3D programms work with stl formats.
    How open STL in Zbrush:
    Plugins -> 3D print -> STL import.

  • Creature 3D Model

    Creature 3D Model

    CAN BE USED FOR PRINTING

  • Cheetah One Line Animals 3D Print Model

    Cheetah One Line Animals 3D Print Model

    Description in progres. Soon published. Original 2D design by Differantly.

  • Bull One Line Animals 3D Print Model

    Bull One Line Animals 3D Print Model

    ​Description in progres. Soon published. Original 2D design by Differantly.

  • San Fermin 3D Print Model

    San Fermin 3D Print Model

    San Fermin Keychain

  • Door hanger, hanger, radiator hanger, hook, coat rack 3D Print Model

    Door hanger, hanger, radiator hanger, hook, coat rack 3D Print Model

    Coat hook to a radiator or a door. Clearance 4cm.
    Very good solidity, the shape of the hook avoids to damage the clothes. The triangular recessed patterns save the filament.

  • REMIX RPI3 2600 WOODGRAIN (Raspberry Pi 3 Atari 2600 Case) 3D Print Model

    REMIX RPI3 2600 WOODGRAIN (Raspberry Pi 3 Atari 2600 Case) 3D Print Model

    Summary
    Had to make the bad ass design from Haunt Freaks https://www.thingiverse.com/thing:2269086
    Even more bad ass by added a woodgrain front plate for a more Authentic look
    Print Settings
    Printer:
    DREMEL Rafts:
    No Supports:
    Doesn’t Matter Resolution:
    .15mm Infill:
    15% Notes:
    Print the Front piece vertical for best result i used matchbox wood fill so i could stain to a color of my choice.

  • U.S.S. Daedalus Nameplate 3D Print Model

    U.S.S. Daedalus Nameplate 3D Print Model

    Summary
    Replica of the Nameplate for the starship U.S.S. Daedalus from the Stargate T.V. series.
    I’ve guessed at the size.

  • Huawei Watch Holder 3D Print Model

    Huawei Watch Holder 3D Print Model

    Summary
    Holder for Huawei Smartwatch. Printable in three sections. Glue together.
    Put your existing charger thing in. Maybe use a foam double sided square to keep it in the holder. May need to play with cable channel sizes.

  • Hyperboloid of Revolution 3D Print Model

    Hyperboloid of Revolution 3D Print Model

    Summary
    Hyperboloid of Revolution

  • 50mm Blower Fan Nozzles 3D Print Model

    50mm Blower Fan Nozzles 3D Print Model

    Summary
    These are some nozzles that I’ve designed for part cooling with my FLSUN delta. I had to make something new after upgrading to a knockoff volcano hotend.
    There’s a few different designs. I currently use the V3.
    Print Settings
    Printer Brand:
    Prusa Printer:
    Prusa Mk2 Rafts:
    No Supports:
    No Resolution:
    200 microns Infill:
    5% Notes:
    Make sure that your bridge settings are spot on, to get the best airflow.

  • Yoda 3D Print Model

    Yoda 3D Print Model

    Small Statue of Yoda.

  • Desert Eagle 3D Print Model

    Desert Eagle 3D Print Model

    Small Desert Eagle Family.

  • Ak-47 3D Print Model

    Ak-47 3D Print Model

    Small Ak-47 CSGO.

  • Kitchen Paper Towel Holder 3D Print Model

    Kitchen Paper Towel Holder 3D Print Model

    A simple Kitchen Paper Towel Holder with 3D connectors and a cylindrical wooden rod, easy to assemble without screws or nails.

  • Bracket bracket shelf 3D Print Model

    Bracket bracket shelf 3D Print Model

    Bracket for all wall brackets, shelves or all your creations or repairs!
    Pre-made holes for screws or nails
    The biggest side is 10cm but it is obviously scalable to scale.

  • Ring biker 002 3D Model

    Ring biker 002 3D Model

    Ring of the biker STL 3d model for 3d printing 3D print model
    Ring Model is fully ready for 3d printing of plastic, metal or jewelry wax and CNC!
    Ring of the biker STL 3d model for 3d printing.
    Recommended material – oxidized silver.
    Size -22.5 mm.
    silver 925 Sterling – 18 grams.
    Other sizes and format can be fabricated – it’s FREE, just let me know what size you want by using the contact designer button on the right.
    Any questions? Please contact me.

  • Cabinet Door Latch and post 3D Print Model

    Cabinet Door Latch and post 3D Print Model

    Summary
    The clip and clip-base require a small flat-head screwdriver or knife to assemble. start it at an angle and work the retainer clips over the edge. They fit together one-way. Should work best with #8 screws. The post needs about 1″ long screw, the base, a pair of 1/2″ to 3/4″ long screws
    Print Settings
    Printer Brand:
    MakerBot Printer:
    MakerBot Replicator 2 Rafts:
    Doesn’t Matter Supports:
    No Resolution:
    .3mm Infill:
    2 shell layers, 40% infill Notes:
    The posts on my 15 year old garage sale hardwood cabinet started to disintegrate with age. I love the cabinets but hated that the doors wouldn’t stay shut. I use Inventor at work to model laser/punch/formed metal parts and have become pretty adept at modeling 3D printed parts when things break around the house.. So I measured and modeled up replacement parts that I could use to directly replace the existing molded parts. The hardest part was tweaking the pincer-grip of the base, as the original modeled part was too firm and inflexible, so it was hard to close and open. Adding a 15 degree face draft inward to both edges was the trick needed to make it have a similar feel and retention pressure when closing the door. When printed in the correct orientation, no rafts or supports needed. The clip base with the in-cut side facing up, the clip with the pincers facing up and the post with the large side down. I use blue painters tape on my unheated bed and PLA plastic. Slots in the clip-base allow a small bit of alignment up or down and the slot of the clip itself auto-aligns if the post is off a few 16ths of an inch. The center of the clip could be mounted with a screw through the included, recessed hole (Maybe a #6 or #8 pan head screw) , but this would negate the self alignment feature.
    Post-Printing

  • Honda Integra washing fluid tank cap 3D Print Model

    Honda Integra washing fluid tank cap 3D Print Model

    Summary
    Part number Honda 76802-SV4-003
    At least fits Honda Integra DB6. It’s likely will fit other Honda too.

  • Prusa i3 MK2 Clone Brass TR8 Nut Adapter 3D Print Model

    Prusa i3 MK2 Clone Brass TR8 Nut Adapter 3D Print Model

    Summary
    This adapter will allow a brass TR8 nut, commonly supplied with cheap TR8 rod, to fit into the standard Prusa i3 MK2 X End parts. You will need to cut some material from the nut, so that the bolt holes in the standard parts (and adapter) line up. A file can be used to cut away the soft brass, quite quickly. The photo shows the nut and adapter in place.

  • Ghostbusters Neutrino Wand 3D Print Model

    Ghostbusters Neutrino Wand 3D Print Model

    Summary
    This neutrino wand is based off the wonderful model by DancinFool82. There were a number of modifications I wanted to make to reduce filament used in printing and allow the use of 3/4 inch PVC pipe for the handles. I’m making a proton pack for my son and the handles need to be smaller.
    I’ve split the main base to make it easier to print with minimal support. There are small guides modeled inside so the side panel will be easier to glue on. I’ve added a new mounting peg for the rear handle that has a base piece that slides on before the PVC pipe. This looks more like the original prop to me. The bottom base plate has been redone to allow the use of M2 screws to put it together. There are screw mounts in the main base and side pieces. This will allow access to the electronics after it’s put together.
    The front handle parts have been reduced a little in size to match the smaller 3/4 inch pipe handle. For an adult I think 3/4 inch PVC is better anyway as it feels better in my hands as well. All of the parts have been cleaned up and checked for errors as well. I was having some issues printing some of the original parts.
    I did not include the clippard valve. I’m using this one which is greathttps://www.thingiverse.com/thing:2286284
    Print Settings
    Printer:
    Davinci Mini Rafts:
    No Supports:
    Yes Resolution:
    .2-.3 Infill:
    20-50 Notes:
    The bottom base model has some circles on the edges that rip off easily after printing to keep it from warping because my slicer wouldn’t add a brim.
    Printing at .3 for all parts took about 24 hours. I’ve printed a lot of prototypes so it’s hard to say for sure. It all came out really well though.

  • Mikey Mouse hands 3d print cookie cutters models 3D Model

    Mikey Mouse hands 3d print cookie cutters models 3D Model

    Mikey Mouse hands cookie cutters.
    I can moify model as You need.
    Please send me Your wishes.

  • Pieza de Acople Free 3D Model

    Pieza de Acople Free 3D Model

    Shaft coupling

  • CATACOMBES NUT RING STL 3d model for 3d printing 3D Model

    CATACOMBES NUT RING STL 3d model for 3d printing 3D Model

    CATACOMBES NUT RING STL 3d model for 3d printing 3D print model
    Ring model is fully ready for 3d printing of plastic, metal or jewelry wax and CNC!
    Ring of the CATACOMBES NUT STL 3d model for 3d printing.
    Recommended material – oxidized silver.
    Size – 18 mm. silver 925 Sterling – 12 grams.
    Size – 16mm. silver 925 Sterling – 10 grams.
    Size – 20 mm. silver 925 Sterling – 14 grams.
    Other sizes and format can be fabricated – it’s FREE, just let me know what size you want by using the contact designer button on the right.
    Any questions? Please contact me.

  • Center hand spinner 3D Print Model

    Center hand spinner 3D Print Model

    Center for hand spinner

  • Howard Mike Golden Age Air Racer 3D Print Model

    Howard Mike Golden Age Air Racer 3D Print Model

    This is a scale model of the Howard Mike Golden Age Air Racer in 1/48 scale, I have printed this scale and overall its an easy print, but some pieces get very small. You could also scale it up by 1.5 to get a 1/32 scale model, or by 2 to get a 1/24 scale model.

  • Batman “Low poly” 3D Print Model

    Batman “Low poly” 3D Print Model

    Small figure of the Bat-justicier, model in low poly.

  • Dawn of Justice. Wonder Woman Tiara 3D Print Model

    Dawn of Justice. Wonder Woman Tiara 3D Print Model

    Hello. This is my third modeling experience for a 3d printer. Before that, I was creating files for Pepakura. Soon there is a film about DC comix and I decided to please you with this wonderful model.

  • m542h stepper driver rack. 3D Print Model

    m542h stepper driver rack. 3D Print Model

    rack for 4 m542h stepper drivers.

  • Suporte 3D Print Model

    Suporte 3D Print Model

    Summary
    Suporte para fixação rápida de relógio comparador para calibração da mesa.

  • The Best Damn Prusa i3 MK2 Bed Camera Mount 3D Print Model

    The Best Damn Prusa i3 MK2 Bed Camera Mount 3D Print Model

    Summary
    As many San Francisco Bay Arean makers know, we reach Ikea demo display levels of usability with our tiny living spaces. It’s sometimes tough build stuff and still have more than a hammock draped between two burning man art cars to sleep on.
    For me, the perfect spot to locate my first printer was the closet because:
    it was relatively draft-free
    I could leave the light on for timelapse prints without annoying anyone
    being surrounded by clothes it really dampens the screeching from these new electronical overlords
    and the small chest o’drawers in there just collected random coins, lint, and automotive fuses and bulbs lifted from my trips to Pick-Your-Part that I’d emptied from my pockets onto the end of the day anyway #amiright ???
    Unfortunately, since upgrading from my quaint Printrbot Simple Metal 1403 to the Original Prusa i3 MK2, the larger footprint makes it a veritable behemoth in there. It hangs off the end of the dresser so gets a corresponding larger share of snags, bumps, and bruises from being right in the middle of a very active area (the closet is home to my daily-used Dyson V6, broom, ironing board, clothes, shoes, Plex Media Server, etc). Because of this, I’ve broken the bed camera mount of 3 separate designs on it, including JPgxuAHFR22RQo’s and cocoknight’s. This afternoon I’d had enough…
    <POPEYE>
          That’s all I can stans — I CAN’T STANS NO MO !</POPEYE>
     
    Ladies and gents, without further adieu I give you:
    The Best Damn Prusa i3 MK2 Bed Camera Mount !
    Nitty Gritty:
    Doesn’t snap in two as if it were crafted from paper mâché like every other lightweight bed mount design I’ve tried
    Minimal weight (only 5g for this part when printed in ABS, ~6g for PETG or PLA)
    As close and tall as possible to the bed while still not interfering with the extruder stepper motor during homing — no more viewing your timelapse knife-edge right at the bed
    Left-mounted, where it gosh-darn ought’be ! With luc_e’s over-engineered [4x M3 screws and nuts to hold in an RPi ? Really ? :] but sweet as August corn, Original Prusa MK2 style Octopi cover that mounts the RPi perfectly over the MK2’s MiniRAMBo enclosure, and along with Adafruit’s 24″ RPi camera CSI ribbon extension, allows the ribbon to slide along under the MK2’s aluminum Z frame. I’m even powering the RPi from 5v from a spare endstop pin off the Mini RAMBo – who has 3hrs to same-day Amazon’ yet another USB charger ?
    No metal fasteners needed (the MK2 comes with an extra 12mm M3 screw to replace the stock 10mm one as part of the kit 😉
    Part of its magic is its infill layout and settings (detailed below) but since I know what printer you’re using, I’ve even included gcode for the uninitiated among us (you know who you are 😉
    It’s Skookum as Frig !
    Enjoy !
    -=dave
     
    Print Settings
    Printer Brand:
    Prusa Printer:
    Prusa Mk2 Rafts:
    No Supports:
    No Resolution:
    200 microns Infill:
    11% Notes:
    Slice with Slic3rPE with following adjustments:
    Original Prusa i3 MK2 Colorprint printer profile settings
    0.20mm NORMAL print profile settings
    Solid top/bottom layers: 4/3
    Seam position: rear
    Fill density: 11%
    Fill pattern: Grid
    Combine infil every: 2
    Solid infill every: 25
    Fill angle: 0
    Solid infill threshold area: 46
    Print !
    Gcode for ABS (tested), PETG, and PLA (untested) included for you lazy geniuses !

  • GE Burner Knob Insert (WB03X10218) 3D Print Model

    GE Burner Knob Insert (WB03X10218) 3D Print Model

    Summary
    Here is a fix for an expensive broken GE Monogram Burner Knob (WB03X10218). Print this insert and fix your broken knob. This is one of my first 3D creation. I’ve included the SCAD if you would like to use for your own cooktop challenge.
    Print Settings
    Printer Brand:
    FlashForge Printer:
    Finder Rafts:
    No Supports:
    Yes Infill:
    100% Notes:
    Print knob side down.

  • Kia All New K7 (Cadenza) Front Console Box Organizer 3D Print Model

    Kia All New K7 (Cadenza) Front Console Box Organizer 3D Print Model

    Summary
    If this thing are not fit yours then can be modify with “K7Organizer_Base.skp – Sketchup file”
    Original design have hidden space due to hide secret things. I use to hiding cigarette from my family.

  • Rotor Riot Coaster 3D Print Model

    Rotor Riot Coaster 3D Print Model

    Summary
    Just a simple rotor riot coaster with the exposed infill
    Bottom Layer = 3
    Shell = 3
    Top Layer = 0**

  • Round door miniature 3D Print Model

    Round door miniature 3D Print Model

    Miniature round door for decorated a child’s room or other … created an imaginary world for children …

  • Fixing screws for glue gun, silicone etc. 3D Print Model

    Fixing screws for glue gun, silicone etc. 3D Print Model

    This screw allows to repair a gun with glue or silicone whose screw is damaged

  • CarRim Pendant 3D Print Model

    CarRim Pendant 3D Print Model

    Model of a car rim pendant.
    For a special gift.
    Enjoy! 🙂

  • Saucer, cup, flower pot, saucer, cup, flower pot 3D Print Model

    Saucer, cup, flower pot, saucer, cup, flower pot 3D Print Model

    Saucer for flower pot. The pot is raised to avoid stagnant water.
    Diameter of the base 10cm (diameter of the top edge: 12cm).
    Possibility to enlarge the object for larger saucers

  • Fiberon 45 Degree Railing Attachment 3D Print Model

    Fiberon 45 Degree Railing Attachment 3D Print Model

    Summary
    I designed this because I was unable to find a 45 degree mount for my deck railings.
    Print Settings
    Printer:
    Monoprice Mini Select Rafts:
    Doesn’t Matter Supports:
    Doesn’t Matter Resolution:
    .2mm Infill:
    10% Notes:
    Print with ABS rather than PLA as it will be used outside
    I printed with 10 lines of perimeter and the part is plenty strong enough.

  • Diy RC Tank controller bluetooth 3D Print Model

    Diy RC Tank controller bluetooth 3D Print Model

    Summary
    Diy RC Tank controller by bluetooth
    Shafts of tracks are nails 1.4mm
    https://youtu.be/v_acOGMTJx0https://youtu.be/GOoWD-4ZSuIhttps://youtu.be/pEErSCjdRUM
    Print Settings
    Printer:
    BQ Hephestos 2 Rafts:
    No Supports:
    No Resolution:
    0.2 Infill:
    20%

  • Lightweight caster wheel 3D Print Model

    Lightweight caster wheel 3D Print Model

    Summary
    A little caster wheel I made for my robot.
    Total height approximately 43mm.
    Mounts on two screws 40mm apart.
    Print Settings
    Printer:
    Monoprice Select Mini Rafts:
    Doesn’t Matter Supports:
    Yes Infill:
    50% Notes:
    PLA with a 0.4mm nozzle worked fine for me.
    If you need to adjust the tolerances for your printer, try changing the value of “gap” or “big_gap” in the SCAD file.
    Post-Printing
    Put some petroleum jelly on the moving parts to stop them getting glued together.
    The two fork halves glue together, capturing the bracket and wheel.
    Put glue on the two little peg holes, and also on the tip of the axle.
    Be careful not to glue the forks to the top bracket.

  • Chandelier Iris 3D Print Model

    Chandelier Iris 3D Print Model

    Summary
    Anna did it again – designed another magnificent floral themed chandelier. It is 38 cm long by 9 cm wide, made of 19 individual parts, printed in translucent PLA plastic.
    Please see assembly guide pdf.
    Please, donate! (Tip designer in the user profile)Anna Afanasjeva, designer of this chandelier, said that she really appreciates every little help towards her own 3D printer or another spool of filament 🙂
    Print Settings
    Printer Brand:
    Prusa Printer:
    Prusa Mk2 Rafts:
    No Supports:
    Yes Resolution:
    0.2 Infill:
    15%
    Post-Printing
    Cyanoacrylate and hot glue
    How I Designed This
    We use Fusion 360, which is fantastic tool for its timeline feature, which allows all not forward-thinking persons, such as me and Anna are, edit features we overlooked earlier.