Celestron C8 Tripod Bolts 3D Print Model

Summary
These are customized “Smooth n’ Curvy” knobs designed for mounting my Celestron 8″ GPS telescope to its tripod. They use 3″ long 3/8″ bolts, leaving 1″ protruding from the knob. Depending on your printers dimensional accuracy, you may have to ream the hole out with a 3/8″ drill bit so you can press the bolt in. Recommend flipping the model so knob side is down and printing with supports.
Print Settings
Printer:
Monoprice Maker Select Rafts:
Doesn’t Matter Supports:
Yes Resolution:
.2mm Infill:
20% Notes:
Recommend printing with at least 3 walls so you can ream if needed with a 3/8″ drill bit.