Summary
This is literary a can of worms (ok, maggots or larvae really). We needed a suitable container to store food for our bearded dragons and the ones we had was either too big or too small. This one is just perfect. I initially made the walls thinner (1.2 mm == 3 layers) but the walls kept bulging so I had to increase the thickness to 1.6 mm which equals 4 layers with a 0.4 mm nozzle. What Simplify3D does is to make an inner and an outer layer and then fill the middle with a zigzag pattern. This seems prevent the walls from bulging when I print with PETG. The lid has vents on top as well on the sides, so storing one CoW on top of another should work without hampering ventilation.
Can of Worms 3D Print Model
