3DHunt.co

Tag: Maker

  • Widow Maker Squad 3D Model

    Widow Maker Squad 3D Model

  • Hario Ceramic Coffee Mill Skerton 3D Model

    Hario Ceramic Coffee Mill Skerton 3D Model

    The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team

  • Nescafe Alegria Coffee Machine 3D Model

    Nescafe Alegria Coffee Machine 3D Model

    Nescafe Alegria Coffee Machine.Created with 3ds Max 2017 and rendered with V-Ray.Model has 306863 polygons with meshsmooth.Avalaible formats : 3dsmax2017 vray, 3dsmax2016 scanline,3ds,obj, fbx.

  • PHILIPS12LITRESHR220181SOUPMAKERGREY 3D Model

    PHILIPS12LITRESHR220181SOUPMAKERGREY 3D Model

    PHILIPS_1_2_LITRES_HR220181_SOUP_MAKER_GREYPoly Count 44136Verts Count 22662Texture Size 4096x4096Material – YesUV Unwraped- MixedRigged- NoAnimation- NoFile Format- OBJ, STL & FBX, MAYA

  • Tefal sandwich maker latch 3D Print Model

    Tefal sandwich maker latch 3D Print Model

    Summary
    This is a latch for an old Tefal sandwich maker I have.
    The original latch broke and any attempt to glue it failed.
    I ended up taking a photo of the broken piece from above, uploading to Onshape, tracing the contour and finally extruding it to a 3D model to exact size.
    Fit precicely on first print!
    Enjoy…
    How I Designed This
    onshape
    https://cad.onshape.com/documents/06c5bcd43da3a37daf8c8e32/w/a21f5db9f321106fd3ba6dc6/e/518bcfde518925ddbc11c1ff

  • Tea machine 3D Model

    Tea machine 3D Model

    machine electric maker preparation industrial kitchen equipment fast fastfood tea coffee espresso beveragebar beverage samovar cookware

  • Mr coffee maker 3D Model

    Mr coffee maker 3D Model

    mr coffee maker cup one small sunbeam black brewing simple moder design plastic little compact machine kitchen appliance

  • bird feeder to hang 3D Print Model

    bird feeder to hang 3D Print Model

  • Monoprice maker select v2 spool holders 3D Print Model

    Monoprice maker select v2 spool holders 3D Print Model

    Summary
    spool holder (1) needs to have 2 copies and they need a 3/4 inch PVC pipe
    Print Settings
    Printer:
    Monoprice maker select v2
    Rafts:
    Doesn’t Matter
    Supports:
    Doesn’t Matter
    Resolution:
    .2
    Infill:
    20
    Notes:
    spool holder (2) needs supports the others don’t

  • Metal Coffee Maker 3D Model

    Metal Coffee Maker 3D Model

    The 3D Model of Metal Coffee Maker modeled according to the reference.The model can be used for interior design in different premises like living group, kitchen in modern and minimalistic style.The main component is the metal base.The file is neatly modeled, grouped toghether.-No any third party plug-in used-No extra elements included with model-Lights and cameras are not included with model-HDRI map doesn’t included with modelMax Corona scene includes:- 5 Object(s)- 30 PNG textures at 4096×4096. All textures are PBR.Max Vray scene:- 5 Object(s)- 30 PNG textures at 4096×4096. All textures are PBR.Matlib archive includes:-2 sets of textures,2048×2048 PNG,512×512 PNG – for each scene. All textures are PBR.All priview images are rendered with Corona Renderer.

  • Kitchen Appliances Bosch

    Kitchen Appliances Bosch

    Kitchen Appliances BoschModeled in 3d Max 2016, corona-render, textures in archiveUnits: MillimetersNo third party plugin requiredCollection includes 5 models1. Built-in induction cooktop pif645fb1e2. Built-in fully-automatic espresso maker CTL636ES13. Built-in microwave BFL634GS1B4. Electric built-in oven hbg636bs15. Free-standing fridge-freezer KGN39LB35

  • Maker Select Plus / Wanhao Duplicator Plus Hotend Fan Bolt Spacers 3D Print Model

    Maker Select Plus / Wanhao Duplicator Plus Hotend Fan Bolt Spacers 3D Print Model

    Summary
    The screws that attach the fan to my hotend in my Maker Select Plus / Wanhao Duplicator Plus bent. Those screws are apparently M3 x 37MM. I couldn’t find those anywhere, so I purchased very common M3 x 40MM bolts, and designed this spacer to make it fit correctly. It goes in between the bolt and the fan.
    Print Settings
    Printer:
    Maker Select Plus Rafts:
    Doesn’t Matter Supports:
    Doesn’t Matter Resolution:
    .1MM Infill:
    Doesn’t Matter

  • Stratonaut: Exploring The Unknown 3D Print Model

    Stratonaut: Exploring The Unknown 3D Print Model

  • Stratomaker Mascot Key chain 3D Print Model

    Stratomaker Mascot Key chain 3D Print Model

  • DinosaurNothlit’s Maker Coin 3D Print Model

    DinosaurNothlit’s Maker Coin 3D Print Model

    Summary
    It’s my maker coin. It’s the thing I use to test filaments and such. I don’t really care if other people use it (why else would I post it here, after all?), but it’s worth noting that it’s a lot more fun to design your own!

  • Waffle Maker 3D Model

    Waffle Maker 3D Model

    Bee3dd is a team who making 3d model best quality, you don’t need worry when use our models. We take care to build the smallest detail in the model to ensure the best results. These things are not in others.Our slogan is: best quality – best price!+ We offer all electronics 3d model ( latest and oldest ). It is place where you can find anything about technology for your project ( earlier and faster than others )+ Every model we build goes through thorough Quality assessment both visual and technical to make sure the assets look realistic and the models are of the best quality.—————————–The model has a fully textured, detailed design that allows for close-up renders, and was originally modeled in 3ds Max 2012 and rendered with V-Ray. Fidelity is optimal up to a 2K render. Renders have no postprocessing.—————————–File Formats:+ 3ds Max 2012 + Vray 2.0 full setup lighting, camera+ 3ds Max 2012 standard+ Cinema 4D R12 standard ( materials and textures was setup )+ Maya 2012 standard ( materials and textures was setup )+ Lightwave 11 ( materials and textures was setup )+ FBX 2012+ OBJ 2012+ 3DS 2012—————————–Features:+ No isolated vertices+ No coincident vertices+ No coincident/coplanar faces+ Quads and Triangles only ( Clean edge flow, mostly quads, subdividable topology, no poles with more than 5 edges on the model, holding/support edges present to retain shape after subdivision )+ Models resolutions are optimized for polygon efficiency. (In 3ds Max, the Meshsmooth/Turbosmooth function can be used to increase mesh resolution if necessary.)+ Real-world scale ( We make 3d model from actual size and images reference. It is best for making video intro, marketing, animation, games… )+ Naming and Organization ( All geometry is contained in a single layer structure, with the layer having the same name as the product. )+ No special plugin needed to open scene.+ 3ds Max models are grouped for easy selection, and objects are logically named for ease of scene management.—————————–TEXTURES:- Textures highquality, enough for close-up render ( 2048-4096 pixels )- UVWs mapping with mixed: overlapping and non-overlapping- No texture paths referenced by the model. All texture paths were stripped from the model.—————————–Rate for ours models: We are required to assess the customer’s finished product with the best quality. Let us know your comments, we are very thankful for that!Thanks you,Best regardBee3dd team

  • Maker Coin 3D Print Model

    Maker Coin 3D Print Model

    Summary
    Just a bit of fun, its the first thing that I have designed and was done so in TinkerCad
    Print Settings
    Printer:
    Anet A8 Rafts:
    Doesn’t Matter Supports:
    No Resolution:
    0.2 Infill:
    35%

  • Stratomaker bottle opener 3D Print Model

    Stratomaker bottle opener 3D Print Model

  • The Last Jedi First Order Executioner Stormtrooper Helmet 3D Model

    The Last Jedi First Order Executioner Stormtrooper Helmet 3D Model

    The Last Jedi First Order Executioner Stormtrooper Helmet 3D print modelStar Wars The Last Jedi First Order Executioner WEARABLE Helmet!All the details are separated, welded, cleaned and totally print-ready.You will get:- Helmet (4mm wall thickness)- Nose (6mm thickness)- Aerator- Antenna (multiply by 4pcs)- Visor templateHelmet is a one-piece model.You will have to divide it by yourself, if it doesn’t fit your printer size.We recommend to print it 0,2mm layer height and 0,4mm nozzle.Please NOTE: This model is for personal use only! No resale or commercial usage allowed!Enjoy! 🙂

  • Monoprice Maker Select V2.1 Hot Bed Cable Bracket 3D Print Model

    Monoprice Maker Select V2.1 Hot Bed Cable Bracket 3D Print Model

    Summary
    This is a bracket to help keep the hot bed wires from bending and hitting the build plate. It also keeps the wires low and away from a rear mounted part cooler when the extruder is near the rear of the build plate. The bracket is designed to work with the RepRap Champion Y Carriage Plate Upgrade for the Monoprice Maker Select / Wanhao Duplicator i3.
    To install:
    Place the bracket between the Y-carriage plate and the hot bed with the clips pointing down, near the hot bed wires. Hook the clip on the outside of the Y-carriage plate and slowly lift the end until the other clip clicks into place inside the Y-carriage plate cutout. It’s a tight fit so some trimming may be needed. Once the bracket is in place, lay the hot bed wires on top of it and use a small zip tie and the provide holes to secure them in place. Make sure the eyelet of the zip tie is on the upper side of the bracket to keep it from hitting the frame.
    Print Settings
    Rafts:
    No Supports:
    No Resolution:
    0.2 Infill:
    100%

  • T-rex Robot 3D Print Model

    T-rex Robot 3D Print Model

  • Coffee Maker 3D Model

    Coffee Maker 3D Model

    A high realistic 3d model of Coffee Maker.Originally created with 3ds Max 2012 and rendered with V-Ray.Kind of texturing: diffuse maps+materials.This model is ideal for photorealistic visualizations and close up.Correspond to the real model.Objects of model are contained in a separate layer, for easy management.All objects assembled in group ‘Coffee_Maker’.Model does not contain extraneous geometry, helpers and cameras.Does not require any third-party plug-ins for using this model.The mesh objects centered in the scene. Model is placed at 0,0,0.This model contains 4 separate objects.Model contains 17 909 polygons and 18 562 vertices with MeshSmooth OFF.Model contains 68 846 polygons and 70 165 vertices with MeshSmooth ON (1 Iteration).Units used: Milimeters.Textures:Model contains 5 .jpeg textures.Texture resolutions: from 800×800 to 4096×4096.The files are:- 3ds max 2010- 3ds max 2012- 3ds max 2014- FBX- OBJ- 3DS- textures

  • Ice Maker Machine Brema GB902a 3D Model

    Ice Maker Machine Brema GB902a 3D Model

    Undercounter ice maker – Granular systemModeled to real-world scale.Originally modelled in 3ds max 2015. Images rendered with vray 3.0.All textures and materials are included and mapped.All objects have same multi/sub object material for easy editing.All colors can be easily modified.

  • Widowmaker Huntress Rifle 3D Model

    Widowmaker Huntress Rifle 3D Model

    Widowmaker Huntress Rifle (Widowkiss) Fully ready for 3D-Print. Model is splitted in 6 parts to print on 18×18 cm printer.Model of rifle ripped from game. Size is 90×13.5x30cmI do comissions! Just email me if interested) [banditmoney@yandex.ru]

  • La Pavoni Espresso Machine 3D Model

    La Pavoni Espresso Machine 3D Model

    I modeled this espresso machine in Fusion 360 and transferred it into Cinema 4D, where I made the textures and the conversions.The scale is 1:1 (I made the measurements with my caliper on my own machine and I like the coffee it makes!)The model is high poly.

  • Coffee pot 3D Model

    Coffee pot 3D Model

    Braun coffee pot thats nicely modelled

  • Coffee Maker 3D Model

    Coffee Maker 3D Model

    coffee espresso machine commercial industrial shop cafe house caffeine maker cappuccino drink latte bar 3d restaurant

  • Monoprice (slight remix) Maker Select V2 Rear Cable Conduit 3D Print Model

    Monoprice (slight remix) Maker Select V2 Rear Cable Conduit 3D Print Model

    Summary
    This is the same as the version posted by inches, but I added a small name plate and changed the Wanhao lettering to the Monoprice logo on the cover plate. the base is exactly the same file, i just added it here so people wouldn’t have to pull from both thing files. Now those of us with the monoprice clone can accessorize in style.

  • Electronic whistle 3D Model

    Electronic whistle 3D Model

    Features:-High quality polygonal model, correctly scaled for an accurate representation of the original object.-Models resolutions are optimized for polygon efficiency. (In 3ds Max, turbosmoth can be used to increase mesh resolution if necessary.)-All colors can be easily modified.-3ds Max models are grouped for easy selection,-No part-name confusion when importing several models into a scene.-No cleaning up necessary just drop your models into the scene and start rendering.-No special plugin needed to open scene.-Model does not include any backgrounds or scenes used in preview images.*************************File Formats:- 3ds Max 2014 V-Ray- 3ds Max 2012 V-Ray- OBJ (Multi Format)- FBX (Multi Format)********************************Hope you like it!Also check out my other models,

  • Electronic whistle 3D Model

    Electronic whistle 3D Model

    Features:-High quality polygonal model, correctly scaled for an accurate representation of the original object.-Models resolutions are optimized for polygon efficiency. (In 3ds Max, turbosmoth can be used to increase mesh resolution if necessary.)-All colors can be easily modified.-3ds Max models are grouped for easy selection,-No part-name confusion when importing several models into a scene.-No cleaning up necessary just drop your models into the scene and start rendering.-No special plugin needed to open scene.-Model does not include any backgrounds or scenes used in preview images.*************************File Formats:- 3ds Max 2014 V-Ray- 3ds Max 2012 V-Ray- OBJ (Multi Format)- FBX (Multi Format)********************************Hope you like it!Also check out my other models,

  • Maker Coin (Wotcha Making) 3D Print Model

    Maker Coin (Wotcha Making) 3D Print Model

    Summary
    Maker Coin your my youtube channel that I use for testing fillament.

  • Sword Pin! 3D Print Model

    Sword Pin! 3D Print Model

    A sword pin that uses the tack from a thumbtack! modeled after a claymore. printed at .01mm layer height at %100 infill. Enjoy!

  • Melitta Caffeo Varianza PBR 3D Model

    Melitta Caffeo Varianza PBR 3D Model

    PBR Version on Melitta Caffeo Varianza Coffe machineTexteres exported from Substance Painter as Unity 5 Standart Specular Material

  • Maker Select v2 Z axis Bearing Mounts 3D Print Model

    Maker Select v2 Z axis Bearing Mounts 3D Print Model

    Summary
    previously I created a set of X-ends for the Monoprice Maker Select v2 to replace the stock metal ones because I wanted a way to use standard LM8UU bearings for the z-axis. Those have been installed on my printer for the last couple of months, but I figured I’d try making a set of bearing holders in case any of you want to use different bearings, but are happy with the metal x-ends that your printer came with.
    These seem to work pretty well. Just screw them in from the bottom, slide the bearing into place, and you should be good to go.
    I printed these in ABS with 4 perimeters and 40% infill, but the walls are pretty thin so you could probably do them 100% infill and it wouldn’t make much difference in print time.

  • Coffee mashine Simonelli Appia2 3D Model

    Coffee mashine Simonelli Appia2 3D Model

    This Espresso Machine Simonelli Appia2Very accurate modelisation, ideal for photorealistic visualizations.Textures are included in ZIP.Gamma 2,2.Max 2016 file Vray render ready, lighting included.Obj file is need texture reassignment.

  • Dallah 3D Model

    Dallah 3D Model

    DALLAH
    ===============================
    – Modeled in Blender.
    – Preview image rendered using cycles.
    – All scene are included in .blend files.
    – Poly count are before sub division
    – Great for close up render.
    – All parts and materials are logically named.
    OTHER FORMATS
    =================
    – 3ds MAX
    – COLLADA (.dae)
    – Autodesk FBX
    – OBJ

  • Coffeepot 3D Model

    Coffeepot 3D Model

    High quality 3d model of coffeepot. The model ready to use. The model has reasonable amount of polygons and accurate grid. Have been created in 3Ds Max 2016 and are not the result of exports from other software. Model is not have sweep objects.Renderer Used: Corona ver. 1.5File formats:- 3ds Max 2016 (Corona ver. 1.5)- 3ds Max 2013 (Corona ver. 1.5)- OBJ (Multi Format)- 3DS (Multi Format)- FBX (Multi Format)

  • Flying Maker Coin 3D Print Model

    Flying Maker Coin 3D Print Model

    Summary
    My Maker’s Coin is a flying one!
    Print Settings
    Printer:
    Tronxy X3 Rafts:
    No Supports:
    No Resolution:
    0.2mm Infill:
    30% Notes:
    nozzle 0.4mm
    PLA
    bed temp: ambient
    filament temp: 200 °C first layer, other layers 195 °C

    Custom Section

  • Maker Select V2.1 fan mount for Dial Indicator

    Maker Select V2.1 fan mount for Dial Indicator

    Summary
    Made a copy of the Dial Indicator clamp to fit my Maker Select V2.1 but offsetting the dial indicator to line up with the extruder. M3 nuts and M3 bolts longer than the original fan bolts necessary.

  • plug and make

    plug and make

    Plug and Make, c’est « connecte et fabrique ». C’est un mobilier en perpétuel évolution, qui veut s’adapter à l’habitat. Son principe est simple car il est pensé comme un plateau de jeux : une plaque de “Lego“ ou on vient y connecter et y fabriquer son propre univers. La seule différence, c’est qu’ici la plaque est une planche de contreplaqué et les briques sont des pièces imprimées en 3D ou des ronds de pin, le tout s’insérant dans des percements de différentes formes.

  • [WIP] Laser Cut Maker Puzzle – Color mapped

    [WIP] Laser Cut Maker Puzzle – Color mapped

    Summary
    This is an alternative version of Jennifer Schachter’s Laser Cut Maker Puzzle, built with Adam Savage for Tested.com’s SXSW 2017 Scavenger Hunt. Details and original engraving/cutting/assembly tips at https://www.thingiverse.com/thing:2240542.
    This is VERY MUCH a work in progress aiming to make the puzzle easier to engrave and cut on the laser cutter at the Johnson County Library MakerSpace, or any laser cutter that can process color-mapped designs.