On March 21, 2008, Kurganmashzavod unveiled a modernized variant of the vehicle and was designated as the BMD-4M. The primary cause of the alterations was due to the bankruptcy of the original manufacturer being the Volgograd tractor factory. In 2008 it is planned to carry out comprehensive testing modernized BMD-4 program agreed with the Chief Armor Management (Bolshoi[who?]) of the Ministry of Defense and the VDV. According to test results and Mikhail Bolotin, the president of Concern Tractor Plants (KTZ), mass production was initially planned for the following year.[8] The mass production of the modernized BMD-4 was later postponed along with the 2S25 Sprut-SD.[9] Nikolay Makarov, the Chief of the General Staff of Russian Armed Forces, dismissed the BMD-4 as “a version of the BMP-3” with no protection and costs more than an expensive tank.[10]
Tag: IFV
-
T-15 Barbaris 3D Model
Like the T-14, the T-15 is protected by reactive armour[4] and the Afganit (Russian: Афганит) active protection system. While the T-14 has its Afganit launch tubes at the base of its turret, the T-15 has them arrayed along the top sides of its hull.[5] It uses four soft-kill launchers to deploy smoke grenades that disrupt visual and infrared guidance systems, and five hard-kill launch tubes on top of the hull, compared to the T-14’s ten hard-kill tubes on the turret which automatically turns to face a threat.[2] The T-15 has “an unprecedented level of armor protection,” including improved passive steel and ceramic composite plate armor and a slat armor cage at the rear. Its new Malakhit (Malachite) ERA is claimed to protect against ATGMs like the FGM-148 Javelin and Missile Moyenne Portée (MMP) and 120 mm tank rounds like the German DM53/DM63 and American M829A3 APFSDS sabots. In addition to hard-kill and soft-kill APS, the developer uses a special paint that significantly reduces the vehicle’s infrared signature. The floor is reinforced with an additional armor plate for counter-mine and counter-IED protection, and it has a jamming system to detonate radio-controlled anti-tank mines. The T-15 has an NBC protection system.[1]
-
BMP-3 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
ZBL-09 IFV 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
Kurganets-25 IFV 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
ZBD-97 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
VBCI 2 3D Model
The VBCI 2 is a wheeled infantry fighting vehicle. It is an improved version of the original French VBCI, developed by Nexter Systems. Developers took into account feedback from tests and combat experience of the original VBCI. The Mark 2 was first publicly revealed in 2015. This IFV is aimed mainly at export customers.The VBCI Mk.2 has a higher level of protection and firepower. The Mk.2 is much heavier than its predecessor. It weights 32 000 kg opposed to 25 600 kg. Vehicle is powered by a new engine.Even though the new VBCI 2 looks like the older version. In fact it has an all-new hull that is longer and has a higher roofline. The hull is welded of aluminum armor. Vehicle can be fitted with add-on modular steel armor package or even titanium armor plates, so protection level can be tailored depending on mission requirements. All-round protection is against 14.5-mm armor-piercing projectiles. NBC protection and fire suppression systems are fitted as standard.
-
VBCI All Pack 3D Model
VBCI infantry fighting vehicle contractorsIn November 2000, the French Ministry of Defence awarded a contract to Giat Industries (now known as the Nexter Group) and Renault VI (now Renault Trucks) for the first 65 vehicles (54 VCI – including 12 with the Eryx missile system – and 11 VPC). A joint venture company, Satory Military Vehicles, was set up by Giat and Renault Trucks to be responsible for the VBCI and a number of other vehicles.In September 2003, it was decided to wind up this company and reorganise relations between the two companies.It was determined that Giat would be prime contractor and have responsibility for marketing of the VBCI, the AMX 10P and AMX 10RC. Renault Trucks Defense is the prime contractor with responsibility for marketing of the VAB.Renault has responsibility for the mobility systems, including the driver’s station, engine, gearbox, suspension and axles and on-board electrical networks. Nexter is responsible for the armoured hull, interior furnishing, assembly and integration of the turret and vehicle, observation, command and control, weapons and self-protection systems.
-
VBCI 3D Model
The Véhicule Blindé de Combat d’Infanterie (VBCI, “Armoured vehicle for infantry combat”) is a French Infantry fighting vehicle designed to replace the AMX-10P.[3] They entered active service with the French Army in 2008, with 630 vehicles ordered up to 2010. Spain [4] and the UK [5] have shown interest in the vehicle.The Véhicule Blindé de Combat d’Infanterie is built on an aluminium hull which carries a modular THD steel and titanium armour, which can be replaced in the field. The 8×8 wheel combination is designed to make the VBCI more comfortable and less costly than a tracked vehicle, while giving it sufficient mobility to back the Leclerc tank. The VBCI is also designed to be transportable by the Airbus A400M, with an empty mass less than 18 tonnes (full load mass up to 28 tonnes).
-
Alvis FV105 Sultan 3D Model
FV105 Sultan is a British Army command and control vehicle based on the CVR(T) platform ( Scorpion, Samaritan, Spartan, Scimitar,Samson……) It has a higher roof than the APC variants, providing a more comfortable “office space” inside for command crew. Only the tracks & lights are textured, maps included
-
IFV Lynx 3D Model
Lynx is a armoured fighting vehicle developed by Rheinmetall Landsysteme (part of Rheinmetall’s Vehicle Systems division). The Lynx, configured as an infantry fighting vehicle (IFV), was unveiled publicly at the Eurosatory defence exhibition on June 14, 2016.[1]According to Rheinmetall, the Lynx family of tracked armoured vehicles is at the forefront of a new trend in IFV design toward armoured vehicles with lower unit and through-life costs and reduced complexity. One of the key principles of the Lynx concept is the integration of proven sub-systems with a high technology readiness level to reduce development time, cost and technical risk.[2]
-
BTR-4 Bucephalus armoured personnel carrier 3D Model
The BTR-4 “Bucephalus” is a 8×8 wheeled armoured personnel carrier (APC) designed in Ukraine by the Kharkiv Morozov Machine Building Design Bureau as a private venture. The prototype, which was designed as a private venture, was unveiled at the Aviasvit 2006 exhibition held in Ukraine in June 2006.
-
Mitsubishi Type 89 IFV 3D Model
The 3d model based on a real
fighting vehicle, created according to the original dimensions. All model files were “smoothed”. We can provide product files with original geometry by your request.All main parts of the model are separated objects. Therefore, you can easy change all materials. We provide several formats for each model, most of them available by default.* images rendered with using V-Ray plugin (we don’t include lighting and environment to a set). -
Patria XA-203 armoured personnel carrier 3D Model
The Patria Pasi is a Finnish made six-wheeled armoured personnel carrier (APC) originally designed for Finnish Defence Forces. The first version was produced in 1983 and serial production began in 1984. It was designed to operate with ease of use, simple structure and low-cost maintenance. The basic appearance and configuration of Patria Pasi is similar to most wheeled APCs. The XA-180 and XA-185 versions are fully amphibious while the XA-203 is not.
-
TIFV C25 Infantry Fighting Vehicle 3D Model
TIFV -Turkish Infantry Fighting VehicleFor the Turkish version of the license is used for marking TIFV (Turkish Infantry Fighting Vehicle). The vehicle is based on the type M113, sharing a significant proportion of parts.
-
PTS-M 3D Model
PTS-M – a floating conveyor medium modernized.Caterpillar floating conveyor PTS-M is designed for amphibious crossings through water barriers of artillery systems, wheeled and caterpillar tractors, armored personnel carriers, cars, personnel and various cargoes.
-
Gorets-K Mine-Resistant Ambush Protected Vehicle 3D Model
Highlander-K – Russian explosion-proof armored special vehicle (similar to MRAP-type vehicles) for carrying out tasks in mountainous conditions.
-
US Infantry Fighting Vehicle Bradley M2 3D Model
Bradley M2 IFV M2A2 A2 US Infantry Fighting Vehicle tank military transport desert troop carrier army heavy armored gun combat cannon war APC
-
BMP-64 with BM-7 armoured personnel carrier 3D Model
BMP-64 is an experienced Ukrainian infantry fighting vehicle, also classified as a heavy armored personnel carrier. The machine was developed by the Kharkov armored repair plant on the basis of the chassis of the T-64 tank, which underwent a deep modification.BM-7 “Parus” is a universal combat tower of Ukrainian production, intended for installation on infantry fighting vehicles and armored personnel carriers.
-
BMP-64 armoured personnel carrier 3D Model
BMP-64 is an experienced Ukrainian infantry fighting vehicle, also classified as a heavy armored personnel carrier. The machine was developed by the Kharkov armored repair plant on the basis of the chassis of the T-64 tank, which underwent a deep modification.
-
Hipopotam APC 3D Model
The Hipopotam (hippo) multi-role armored vehicle was developed by the Polish AMZ Kutno. It is a clean sheet design. Its development commenced in 2010 and has been funded by the Polish government. This armored vehicle was revealed in 2012.The Hipopotam is not an armored personnel carrier, however it can be also used as one. It is planned as complement to the Polish Rosomak APCs. It is a license-produced version of the Patria AMV. This armored vehicle is intended to suit many specialized roles. The Hipopotam has large internal volume and a 5 t cargo capacity. It might be used as armored ambulance, engineering vehicle, logistic vehicle, air defense missile carrier, specialized equipment carrier and so on. The smaller Rosomak APC lacks internal volume for these applications.
-
AMZ Dzik-3 3D Model
Dzik (Polish: Wild Boar) is a 4.5-ton Polish-made multi-purpose infantry mobility vehicle. Produced by the AMZ works in Kutno, it is designed for serving both the patrol and intervention roles, as well as an armoured personnel carrier for use by various peace-keeping and policing forces. Its armour provides defence against 7.62 mm bullets. The Dzik-3 also boasts bulletproof windows, puncture-proof tires and smoke launchers.Dzik-3 (also known by the Iraqi designation Ain Jaria 1) with 4 doors, room for up to 11 soldiers, 13 firing ports, machine gun turret and two double smoke grenade launchers.
-
Nexter Aravis 3D Model
The Aravis is an infantry mobility vehicle developed and built by Nexter. An order for 15 Aravis vehicles was placed by the Délégation Générale pour l’Armement in April 2009 for use by the French Army as a reconnaissance and escort vehicle for engineer units. Deliveries for the initial order began in January 2010.The Aravis’ chassis is based on the Unimog U5000 chassis. The total internal volume for the vehicle is 9.5m3 with 8m3 of that under full armoured protection. The Aravis can be equipped for a variety of roles, including patrol vehicle, ambulance, and command and control vehicle.The Aravis was designed with protection against mines, improvised explosive devices, 14.5mm anti-armour rounds, and 155mm artillery bursts in mind, meeting full STANAG 4596 Level 4 specifications. Like many other mine-protected vehicles, the Aravis was built with a V-hull intended to deflect as much energy as possible from detonations beneath the vehicle away from the vehicle. Nexter has patented the modular hull armour used on the Aravis under the name “Safepro”. The vehicle has survived detonations of 50 kg (110 lb) of TNT at a distance of 5 m (16 ft) in testing.
-
BRM-1 K 3D Model
Command variant of the BMP-1 for motorized rifle regiments, developed in 1972. Production started in 1973. Standard armament was preserved. The troop compartment was redesigned to accommodate field tables and map boards. There is seating space for three officers. It has an a mastil antenna, a radar Tall Mike PSNR-5K R-123M and R-111 radios and a GPK-69 navigation system. Also are equipped with the GLONASS navigation system.Model done on MAX 2013, untextured model.
-
Puma IFV 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
BRM-1 K 3D Model
Command variant of the BMP-1 for motorized rifle regiments, developed in 1972. Production started in 1973. Standard armament was preserved. The troop compartment was redesigned to accommodate field tables and map boards. There is seating space for three officers. It has an a mastil antenna, a radar Tall Mike PSNR-5K R-123M and R-111 radios and a GPK-69 navigation system. Also are equipped with the GLONASS navigation system.Model done on MAX 2013, untextured model.
-
PRAM-S SPM-120 3D Model
A self-loaded mortar system mounted on an elongated BMP carriage built by Czech Republic. It is designed to provide permanent fire support for a mechanised battalion against enemy manpower, his anti-tank assets, lightly armoured targets, and light field shelters.The model was done on MAX 2013, untextured model, only the lights are mapped & textured, maps included.
-
M2A1 Bradley 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
M2A1 Bradley 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
Mt-Lbu NVST 3D Model
The MT-LBu is a Soviet multi-purpose fully amphibious armoured carrier which was developed under the factory index Ob’yekt 10 in the late 1960s, based on the MT-LB. It has a more powerful engine, a 40 cm higher hull and a longer chassis with 7 road wheels on each side. This version has a NVST on the turret, 12.7 mm machine gun.
Untextured model done on MAX 2013, only lights and tracks are mapped and textured , maps included. -
Mt-Lbu PKM 762mm 3D Model
The MT-LBu is a Soviet multi-purpose fully amphibious armoured carrier which was developed under the factory index Ob’yekt 10 in the late 1960s, based on the MT-LB. It has a more powerful engine, a 40 cm higher hull and a longer chassis with 7 road wheels on each side. This version has a PKM on the turret, 7.62 mm machine gun.
Untextured model done on MAX 2013, only lights and tracks are mapped and textured , maps included. -
Mt-Lbu PKM 7,62 mm 3D Model
The MT-LBu is a Soviet multi-purpose fully amphibious armoured carrier which was developed under the factory index Ob’yekt 10 in the late 1960s, based on the MT-LB. It has a more powerful engine, a 40 cm higher hull and a longer chassis with 7 road wheels on each side. This version has a PKM on the turret, 7.62 mm machine gun. Untextured model done on MAX 2013, only lights and tracks are mapped and textured , maps included.
