Высокодетализированная модель TIE Fighter-a, прямо из известной студии. Предназначалась для съёмки крупным планом.
Tag: fighter
-
Chengdu J-20 3D Model
The J-20 is a fifth-generation fighter aircraft developed by Chengdu Aerospace Corporation for the Chinese People’s Liberation Army Air Force (PLAAF).
-
Canadair CF-5 A Freedom fighter 3D Model
The F-5A is a small, lightweight, low cost, easy-to-maintain supersonic fighter, well suited to the needs of friendly foreign countries who didn’t need, couldn’t afford, and couldn’t maintain the bigger, more complex fighters in the U.S. inventory. Development was begun by Northrop in the mid-1950’s but for a time took back seat to the development of the related T-38 trainer. In 1958 Northrop initiated building of a prototype of this small fighter, designated the N-156F. Two prototypes were built and flown, with a third partially constructed. The firm market for this airplane didn’t develop until May of 1962 when the U.S. Department of Defense selected the N-156F as the basis for the airplane to modernize the air forces of selected countries under the Military Assistance Program (MAP). The airplane was given the designation F-5A, with first flight of the prototype ( a modified N-156F) on July 31, 1963. Canadair built the F5 for Canadian Air Force & Royal Netherlands air force.
-
British Aerospace Harrier II winter scheme 3D Model
The British Aerospace Harrier II is a second-generation vertical/short takeoff and landing (V/STOL) jet aircraft used previously by the Royal Air Force (RAF) and, between 2006 and 2010, the Royal Navy (RN). The aircraft was the latest development of the Harrier Jump Jet family, and was derived from the McDonnell Douglas AV-8B Harrier II. Initial deliveries of the Harrier II were designated in service as Harrier GR5; subsequently upgraded airframes were redesignated accordingly as GR7 and GR9. This model it’s the GR7/9 version of this british model. Here is the same model but now with winter scheme . Rendered in Mental with MAX2013.
-
Eurofighter Typhoon Saudi Arabia scheme 3D Model
The Eurofighter Typhoon is a foreplane delta-wing, beyond-visual-range, close air fighter aircraft with surface attack capability. Eurofighter has ‘supercruise’ capability: it can fly at sustained speeds of over Mach 1 without the use of afterburner.Development of the aircraft has been carried out by Eurofighter GmbH, based in Munich and wholly owned by BAE Systems of the UK, Alenia Aeronautica of Italy and the EADS Deutschland (formerly DaimlerChrysler) and EADS Spain (formerly CASA).The Eurofighter Typhoon is a highly agile aircraft, designed to be a supremely effective dogfighter in combat.[10] Later production aircraft have been increasingly better equipped to undertake air-to-surface strike missions and to be compatible with an increasing number of different armaments and equipment. Here with Saudi Arabia scheme in ghost sky
-
Typhoon RAF 6 Squadron 3D Model
The next generation fighter for Europe.A detailed Eurofighter model of RAF 6 Squadron, fully detailed nozzle, air brakes, cockpit, gear bay and landing gear. Canopy, air breaks, landing gear bay doors, flaps, aileron are made seperately for easy animation.The Aim-120 and ASRAAM are included.
-
LTV A-7 Corsair II Greek scheme 3D Model
The LTV A-7 Corsair II was one of the most successful military aircraft of modern times and probably the greatest bargain in weapon system procurement history. Was manufactured by Ling-Temco-Vought (LTV) to replace the Douglas A-4 Skyhawk. Its airframe design is somewhat a smaller version of the supersonic Vought F-8 Crusader. The Corsair II initially entered service with the United States during the Vietnam War. It was later adopted by France, Greece,Thailand & Portugal .Here come with Greek scheme .
-
China Chengdu J-20 Fighter Jet 3D Model
The China’s fifth-generation stealthy J-20 developed by 601 Institute . It is expected to fly by 2012.
-
RAF Eurofighter Typhoon 3D Model
A highly detailed model of Typhoon. The landing gears, landing gear bay doors, canards, leading edge slats, trailing edge flaps, air brake, tail hook, rudder, air intake lips are assigned by slider control under 3ds Max.The landing gears are assigned to IK solver. The landing gears’ animation could be easily achieved under 3ds Max version.ARMRAAM, ASRAAM, ALARM, GBU-10, AAQ-14 are included.typhoon.tga is ZK307 ‘EE’ belongs to 6 Squadron.typh02.tga is ZJ950 belongs to 1435 Flight.typh03.tga is ZJ917 ‘QO-G’ belongs to RAF 3 Squadron.typh04.tga is ZJ930 ‘AA’ belongs to RAF 17 Squadron.typh05.tga is ZJ939 ‘DXI’ belongs to RAF 11 Squadron.typh06.tga is ZJ 910 ‘BV’ belongs to RAF 29 Squadron.
-
P-51d 3D Model
The North American Aviation P-51 was an American long-range single-seat fighter aircraft that entered service with Allied air forces in the middle years of World War II.It’s a P-51 Cripes A Mighty from 328th Fighter Squadron,352nd Fighter Group 3rd flown by Major George Preddy.
-
G550 State Of Kuwai 3D Model
The Gulfstream V is a business jet aircraft produced by Gulfstream Aerospace.The texture is for State Of Kuwai.
-
P-3 Royal New Zealand Air Force 3D Model
A detailed model of the P-3 Orion Royal New Zealand Air Force Anti-Submarine aircraft.Fully detailed bomb bay, gear bay and landing gear. The MK-46 Torpedoes, AGM-65 and AGM-84 are included.The slider control is added in 3ds Max version for front and main landing gears, the bay door and the door for the weapon bay.The texture is for Royal New Zealand Air Force.The propeller’s rotating effect has been added to 3ds Max version. To realize it, just unhide the roter set and hide the propeller.The model is originally made in 3ds Max 9. The close-up render for other formats might need mesh smooth modifier.The render scene are not included.
-
F-16 RBAF 3D Model
A detailed model of F-16C Block 40 for Royal Bahraini Air Force, fully detailed nozzle, air brakes, cockpit, gear bay and landing gear.The AIM-9M, AIM-120, ALQ-184 and drop tank are included.The model is NOT animated. but adjusted pivot points are included in Max version for easy animation.The model is originally made in 3ds Max 9. The close-up render for other formats might need mesh smooth modifier.The pilot and the render scene are not included.
-
P-3C US Navy with High and Low scheme 3D Model
A detailed model of the P-3 Orion Anti-Submarine aircraft.Fully detailed bomb bay, gear bay and landing gear. The MK-46 Torpedoes, AGM-65 and AGM-84 are included.The slider control is added in 3ds Max version for front and main landing gears, the bay door and the door for the weapon bay.Two textures are added, including US Navy Low and High Visibility texture.The propeller’s rotating effect has been added to 3ds Max version. To realize it, just unhide the roter set and hide the propeller.The model is originally made in 3ds Max 9. The close-up render for other formats might need mesh smooth modifier.The render scene are not included.
-
Game Model F35B War Fly 3D Model
Game Model F35B War FlyI exported to model without performing subdivision surface.To support low-poly , you can get high quality one opening subdivision surface.I created model in pieces and real sizes that you can create animations.It’s a high quality model work, supports low poly, created by cinema 4D.You can increase quality using subdivision surface.Im trying yo develop myself in 3D projects also trying to give you my works controlling issues and fixing them. Im trying to do best.Please feedback faulty works that I can help you.I will be happy when you rate and comment on my works.After Effects Element 3D and supports file formats are available.Poly = 26764Vertex = 22392Formats :.c4d.3ds.stl.obj.fbx.dxf
-
Visitor sky fighter transport v2 3D Model
Visitor sky fighter transport v2 – infantry delivery machine
-
Bell X-1 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
CP-140 Aurora 3D Model
A detailed model of the P-3 Orion Canada Anti-Submarine aircraft.Fully detailed bomb bay, gear bay and landing gear. The MK-46 Torpedoes, AGM-65 and AGM-84 are included.The slider control is added in 3ds Max version for front and main landing gears, the bay door and the door for the weapon bay.The texture is for Canada Air Force.The propeller’s rotating effect has been added to 3ds Max version. To realize it, just unhide the roter set and hide the propeller.The model is originally made in 3ds Max 9. The close-up render for other formats might need mesh smooth modifier.The render scene are not included.
-
P-3 Orion Greece Air Force 3D Model
A detailed model of the P-3 Orion Greece Air Force Anti-Submarine aircraft.Fully detailed bomb bay, gear bay and landing gear. The MK-46 Torpedoes, AGM-65 and AGM-84 are included.The slider control is added in 3ds Max version for front and main landing gears, the bay door and the door for the weapon bay.The texture is for Hellenic Air Force.The propeller’s rotating effect has been added to 3ds Max version. To realize it, just unhide the roter set and hide the propeller.The model is originally made in 3ds Max 9. The close-up render for other formats might need mesh smooth modifier.The render scene are not included.
-
YF-23 3D Model
The Northrop/McDonnell Douglas YF-23 was a prototype fighter aircraft designed for the United States Air Force. It was passed over in favor of the YF-22.
-
F-104 Starfighters 3D Model
Because of its physical appearance and performance, the F-104 has often been called the ‘missile with a man in it.’ The design was a product of the Korean War, and was unique in several respects. The encounters with the MiG-15 in Korea caused a strong outcry among Air Force fighter pilots for a cheap, lightweight, maneuverable, high-performance fighter to confront future Soviet fighters. The result was the F-104, a fighter that overemphasized rate of climb and brute speed. Intended as a point defense interceptor, range was sacrificed for rate of climb. Range, however, could be extended using external tanks and in-flight refueling. It used an exceptionally small wing span of only 21 feet, and provided low speed lift through air bled from the engine and vented over the wing. Designed as a supersonic superiority fighter, the F-104 was produced in two major versions. Armed with a six-barrel M-61 20mm Vulcan cannon it served as a tactical fighter and, equipped additionally with heat-seeking Sidewinder missiles, as a day-night interceptor. The USAF procured about 300 Starfighters in one- and two-seat versions. The texture is for JASDF.
-
F-104 3D Model
Because of its physical appearance and performance, the F-104 has often been called the “missile with a man in it.” The design was a product of the Korean War, and was unique in several respects. The encounters with the MiG-15 in Korea caused a strong outcry among Air Force fighter pilots for a cheap, lightweight, maneuverable, high-performance fighter to confront future Soviet fighters. The result was the F-104, a fighter that overemphasized rate of climb and brute speed. Intended as a point defense interceptor, range was sacrificed for rate of climb. Range, however, could be extended using external tanks and in-flight refueling. It used an exceptionally small wing span of only 21 feet, and provided low speed lift through air bled from the engine and vented over the wing. Designed as a supersonic superiority fighter, the F-104 was produced in two major versions. Armed with a six-barrel M-61 20mm Vulcan cannon it served as a tactical fighter and, equipped additionally with heat-seeking Sidewinder missiles, as a day-night interceptor. The USAF procured about 300 Starfighters in one- and two-seat versions. The texture is for Germany Marine.
-
Hawk III 3D Model
The Curtiss F11C Goshawk was a 1930s naval biplane that saw limited success but was part of a long line of Curtiss Hawk airplanes built by the Curtiss.
-
F-18E 3D Model
The combat-proven F/A-18E Super Hornet is a next generation strike fighter with all the capability, flexibility and performance necessary to modernize the air or naval aviation forces of any country. Built by the industry team of Boeing, Northrop Grumman, GE Aircraft Engines, Raytheon and more than 2,000 suppliers nationwide, the Super Hornet embodies the newest advances in multimission capability and decades of growth potential.
-
F-18E-F Super Hornet 3D Model
f-18 f/a-18 f/a-18e f/a-18f f/a-18g f18 f18e super hornet carrier fighter bomber prowler growler jammer boeing mcdonnell douglas us navy marine corps
-
Mig 144 3D Model
The new MiG Multirole Front-Line Fighter [MFI – Mnogofounksionalni Frontovoi Istrebiel ] was unveiled publicly on 12 January 1999. The project has been under development since 1986, is variously designated the 1.42, the 1.44, I-42 and I-44 – the ‘MiG-35’ and ‘MiG-39’ designations are informally applied by some observers. This multi-functional front-line fifth-generation fighter was developed by the MIG [Mikoyan & Gurevich] aviation scientific and production complex of the MAPO military-industrial corporation. The first prototype was delivered early in 1994, and in December 1884 taxi-tests were conducted following which further work was suspended due to a shortage of funds. The 35-ton fighter features a single under-fuselage air intake with two AL41F engines of 20 tons thrust each, and a top speed of over 2,500 km/h. The twin-tail ‘duck’ planform features an all-moving canard-type foreplane with a wingspan of about 15 meters and a length of about 20 meters.
-
Curtiss F11C-2 Goshawk 3D Model
The Curtiss F11C Goshawk was a 1930s naval biplane that saw limited success but was part of a long line of Curtiss Hawk airplanes built by the Curtiss.
-
Raffle 3D Model
Rafale M multi-purpose twin-engine combat aircraft The Rafale M, a single-seater designed for seaborne use, carries the same weapon and navigation system. Its airframe has been designed for aircraft-carriers but retains most of the elements of the other versions.
-
F-5 VFC-111 3D Model
The F-5 is a lightweight, easy-to-fly, simple-to-maintain, and (relatively) cheap supersonic fighter. The texture is for VFC-111 Sundowners.
-
Armored Robot character 3D Model
– No subdivision required- Low poly (Verts: 3343, Faces: 3036, Tris: 5766)- Rigged- No plugin required- Fast rendering- Created in Blender- .3ds, .fbx, .obj are included- User can use it in other compatible softwares
-
Eurofighter Typhoon Qatar version 3D Model
The Eurofighter Typhoon is a foreplane delta-wing, beyond-visual-range, close air fighter aircraft with surface attack capability. Eurofighter has ‘supercruise’ capability: it can fly at sustained speeds of over Mach 1 without the use of afterburner.Development of the aircraft has been carried out by Eurofighter GmbH, based in Munich and wholly owned by BAE Systems of the UK, Alenia Aeronautica of Italy and the EADS Deutschland (formerly DaimlerChrysler) and EADS Spain (formerly CASA).The Eurofighter Typhoon is a highly agile aircraft, designed to be a supremely effective dogfighter in combat.[10] Later production aircraft have been increasingly better equipped to undertake air-to-surface strike missions and to be compatible with an increasing number of different armaments and equipment.
-
EF-111 3D Model
The EF-111A provided protection by using a jamming orbit where it stands off from threat radars to cover friendly aircraft entering and leaving the threat areas, or by using the aircraft’s high-performance capabilities to directly support attacking forces. In the direct support mission, the Raven may fly as in escort position or enter a threat area to the best jammer position. Ravens engaged in direct support often use the extensive night terrain-following capability built into the basic F-111 design.
-
Typhoon 3D Model
The next generation fighter for Europe. It’s the production type and texture is for UK Royal Air Forec. The following armment are included: Asraam, Aim-9 sidewinder, Aim-120 Amraam, MK-82 Bomb, Laser Guided Bomb, JDAM, Meteor BVRAAM, Storm Shadow, JSOW.
-
MiG-15Romania 3D Model
The Mikoyan-Gurevich MiG-15 (NATO reporting name ‘Fagot’) was a jet fighter developed for the USSR by Artem Mikoyan. The MiG-15 would be one of the first successful swept wing jet fighters. It achieved fame over the skies of Korea, outclassing all UN fighters except for the F-86 Sabre. The MiG-15 would be the starting point for the advanced MiG-17, which successfully downed more advanced American fighters such as the F-105 Thunderchief over Vietnam. This texture is for Romania Air Force
-
Star Wars Tie Fighter 3D Model
3D model of TIE fighter fictional starfighter in the Star Wars.Available 3d model format:max (Autodesk 3ds Max)obj .mtl (Wavefront Object)fbx (Autodesk FBX)Texture format: ddsit has been used in 3d visualization project, visual effects, CG artwork, animating, 3d rendering or other field related to 3d design
-
Futuristic Starfighter 3D Model
3D model of futuristic fighter jetAvailable 3d model format:obj (Wavefront Object)it has been used in 3d visualization project, 3d modeling, visual effects, 3d rendering or other field related to 3d design
-
Eurofighter Typhoon Spanish versions 3D Model
The Eurofighter Typhoon is a foreplane delta-wing, beyond-visual-range, close air fighter aircraft with surface attack capability. Eurofighter has ‘supercruise’ capability: it can fly at sustained speeds of over Mach 1 without the use of afterburner.Development of the aircraft has been carried out by Eurofighter GmbH, based in Munich and wholly owned by BAE Systems of the UK, Alenia Aeronautica of Italy and the EADS Deutschland (formerly DaimlerChrysler) and EADS Spain (formerly CASA).The Eurofighter Typhoon is a highly agile aircraft, designed to be a supremely effective dogfighter in combat.[10] Later production aircraft have been increasingly better equipped to undertake air-to-surface strike missions and to be compatible with an increasing number of different armaments and equipment.Here come the spanish version in three schemes, Ala 11 Moron decals, Ala 14 Los Llanos decals and a simple special version of Los Llanos for Tigermeet.
-
A-7 3D Model
Built originally on the airframe of the F-8U Crusader, the A-7 underwent a number of modifications since its 1965 introduction. The A-7 Corsair II, which is retired, was used by TAC for close air support attack missions. The A-7E was the final fleet version of the A-7. After more than two decades of service, however, it was replaced by the F/A-18 Hornet.The A-7E had a 20mm gun and can carry payloads of up to 15,000 pounds of bombs and missiles. Eight ordnance stations were available. A-7E Corsair IIs were part of the two-carrier battle group that conducted a joint strike on selected Libyan terrorist-related targets in 1986. Together with carrier-based F/A-18s, A-7s used anti-radiation missiles to neutralize Libyan air defenses. F/A-18s replaced A-7Es in the carrier air wing mix. The last two squadrons transitioned in FY 1992. Replacing A-7s with F/A-18s gave operational commanders more flexibility by allowing them to employ the F/A-18s in either the fighter or attack role. Also, a smaller number of aircraft (85) are needed in an F/A-18 equipped carrier air wing than in an A-7E equipped carrier air wing (94).
-
A-7 3D Model
Built originally on the airframe of the F-8U Crusader, the A-7 underwent a number of modifications since its 1965 introduction. The A-7 Corsair II, which is retired, was used by TAC for close air support attack missions. The A-7E was the final fleet version of the A-7. After more than two decades of service, however, it was replaced by the F/A-18 Hornet.The A-7E had a 20mm gun and can carry payloads of up to 15,000 pounds of bombs and missiles. Eight ordnance stations were available. A-7E Corsair IIs were part of the two-carrier battle group that conducted a joint strike on selected Libyan terrorist-related targets in 1986. Together with carrier-based F/A-18s, A-7s used anti-radiation missiles to neutralize Libyan air defenses. F/A-18s replaced A-7Es in the carrier air wing mix. The last two squadrons transitioned in FY 1992. Replacing A-7s with F/A-18s gave operational commanders more flexibility by allowing them to employ the F/A-18s in either the fighter or attack role. Also, a smaller number of aircraft (85) are needed in an F/A-18 equipped carrier air wing than in an A-7E equipped carrier air wing.
-
Focke Wulf – FW190 A7 – Black 3 3D Model
Focke Wulf – FW190 A7 – Black 3 – 2/JG 1 – Germany – 1944Originally modelled in cinema4D. Detailed enough for close-up renders. The zip-file contains bodypaint textures and standard materials.Features:- Inside scene: – model – 24 textures, 2 materials, 1 alphamap- No cleaning up necessary, just drop your models into the scene and start rendering.- No special plugin needed to open scene.- Phong shading interpolation / Smoothing – 35°-The files contains seperate parts for a Flying and a Standing-Version- NOTE – In obj, lwo and fbx the Alphamap for the propellor (Prop_Run_Alpha) in the fly-version must manually load in the Materialcanal / Opacitycanal.- c4d R16- Polygones – 545533 Vertices – 384147 – 31 Objects- 24 textures – 2 materials – 1 alpha-map- obj file – lwo file – 3ds file – fbx file Version 2010
-
CZ 75 Low Poly v 1 3D Model
High quality model ‘CZ 75 Low Poly v 1’ specially for your projects.Quality and accurate modeling, allows you to use model in any projects. Model corresponds to all proportions and the real size. Elaborated all small details, accurate UVW mapping and high-resolution textures make the model more realistic, allowing you to use a model in high-resolution renderers (close-up), as well as for creating videos, or video advertising or use in the film industry.The model is created in Autodesk 3ds Max 2010, rendered with Vray 2.10.01, textures and materials are included.Do not forget to rate the model, for us it is very important :)3D model available in these formats: 3ds Max 2010 (.max), Autodesk FBX 2006 (.fbx), OBJ (.obj)Scene Statistic below:-Subdivision NONE:Polys: 9 979Tris: 17 781Edges: 19 042Verts: 9 070- Scale of all details (100,100,100)- Model has real-world scale and is centered at 0,0,0- All pivots in place- Materials, objects and textures have the correct names- No cleaning up necessary, just drop your models into the scene and start renderingTextures are included:-CZ_75_v_1_diffuse.png (2048X2048)Do not forget to rate the model, for us it is very important :)© Leonid Naku [Zurel] 2018
-
Machine gun CIZ 3D Model
High quality model ‘Machine gun CIZ’ specially for your projects.Quality and accurate modeling, allows you to use model in any projects. Elaborated all small details, accurate UVW mapping and high-resolution textures make the model more realistic, allowing you to use a model in high-resolution renderers (close-up), as well as for creating videos, or video advertising or use in the film industry.The model is created in Autodesk 3ds Max 2010, rendered with Vray 2.10.01, textures and materials are included.Do not forget to rate the model, for us it is very important :)3D model available in these formats: 3ds Max 2010 (.max), Autodesk FBX 2006 (.fbx), OBJ (.obj)Scene Statistic below:-Subdivision ON:Polys: 285 338Tris: 569 484Edges: 572 806Verts: 287 246-Subdivision OFF:Polys: 104 012Tris: 206 832Edges: 208 864Verts: 104 630- Scale of all details (100,100,100)- Model has real-world scale and is centered at 0,0,0- All pivots in place- Materials, objects and textures have the correct names- No cleaning up necessary, just drop your models into the scene and start rendering- Model is intended for subdivisionTextures are included:-Machine_gun_CIZ_diffuse.png (6000×6000)-Machine_gun_CIZ_specular.png (6000×6000)-Machine_gun_CIZ_bump.png (6000×6000)Do not forget to rate the model, for us it is very important :)© Leonid Naku [Zurel] 2018
-
Focke Wulf – FW190 A-7 – White 20 3D Model
Focke Wulf – FW190 A-7/R2 – White 20 – Sturmstaffel 1 – Germany – 1944Originally modelled in cinema4D. Detailed enough for close-up renders. The zip-file contains bodypaint textures and standard materials.Features:- Inside scene: – model – 25 textures, 1 alphamap- No cleaning up necessary, just drop your models into the scene and start rendering.- No special plugin needed to open scene.- Phong shading interpolation / Smoothing – 35°-The files contains seperate parts for a Flying and a Standing-Version- NOTE – In obj, lwo and fbx the Alphamap for the propellor (Prop_Run_Alpha) in the fly-version must manually load in the Materialcanal / Opacitycanal.- c4d R16- Polygones – 546467 Vertices – 385311 – 34 Objects- 22 textures – 2 materials – 1 alpha-map- obj File – lwo file – fbx – File Version 2010
-
Focke Wulf – FW190 A8 – Black 12 3D Model
Focke Wulf – FW190 A8 – Black 12 – 2/JG 300 – Bayreuth-Bindlach – 1945Originally modelled in cinema4D. Detailed enough for close-up renders. The zip-file contains bodypaint textures and standard materials.Features:- Inside scene: – model – 24 textures, 2 materials, 1 alphamap- No cleaning up necessary, just drop your models into the scene and start rendering.- No special plugin needed to open scene.- Phong shading interpolation / Smoothing – 35°-The files contains seperate parts for a Flying and a Standing-Version- NOTE – In obj, lwo and fbx the Alphamap for the propellor (Prop_Run_Alpha) in the fly-version must manually load in the Materialcanal / Opacitycanal.- c4d R16- Polygones – 545533 Vertices – 384147 – 31 Objects- 24 textures – 2 materials – 1 alpha-map- obj file – lwo file – 3ds file – fbx file Version 2010
-
Mirage 2000 Greece 3D Model
The Mirage 2000 is a multi-role single-seater fighter which is in servise in many countries. This texture is for Greece Airforce.
-
Mirage 2000 Taiwan 3D Model
The Mirage 2000 is a multi-role single-seater fighter which is in servise in many countries. This texture is for Taiwan Airforce
-
Mig-15 China 3D Model
The Mikoyan-Gurevich MiG-15 (NATO reporting name ‘Fagot’) was a jet fighter developed for the USSR by Artem Mikoyan. The MiG-15 would be one of the first successful swept wing jet fighters. It achieved fame over the skies of Korea, outclassing all UN fighters except for the F-86 Sabre. The MiG-15 would be the starting point for the advanced MiG-17, which successfully downed more advanced American fighters such as the F-105 Thunderchief over Vietnam. This texture is for China Airforce.
-
British Aerospace SABA 1233-1 3D Model
model created in sketchuprender KeyShotedges 117240faces 59928component instances 107grups 166component definitions 37layers 1materials 22
-
HAWKER SIDDELEY P1121 3D Model
model created in sketchuprender KeyShotedges 36066faces 16811component instances 117grups 48component definitions 12layers 1materials 18
-
HAWKER SIDDELEY TYPE 1019E2 3D Model
model created in sketchuprender KeyShotedges 22854faces 10518component 39grups 25component definitions 20layers 1materials 14
-
Grumman OV-1D Mohawk 3D Model
model created in sketchuprender KeyShotedges 184432faces 82731component instances 499grups 217component definitions 115layers 6materials 20
-
Avro 559 3D Model
model created in sketchuprender KeyShotedges 124271faces 61421component instances 169grups 163component definitions 23layers 7materials 17
-
F-4 3D Model
The F-4 Phantom II was a twin-engine, all-weather, fighter-bomber. The aircraft could perform three tactical air roles — air superiority, interdiction and close air support — as it did in southeast Asia. First flown in May 1958, the Phantom II originally was developed for U.S. Navy fleet defense and entered service in 1961. The USAF evaluated it for close air support, interdiction, and counter-air operations and, in 1962, approved a USAF version. The USAF’s Phantom II, designated F-4C, made its first flight on May 27, 1963. Production deliveries began in November 1963. In its air-to-ground role the F-4 could carry twice the normal bomb load of a WW II B-17. USAF F-4s also flew reconnaissance and “Wild Weasel” anti-aircraft missile suppression missions. Phantom II production ended in 1979 after over 5,000 had been built–more than 2,600 for the USAF, about 1,200 for the Navy and Marine Corps, and the rest for friendly foreign nations, including to Israel, Iran, Greece, Spain, Turkey, South Korea, West Germany, Australia, Japan, and Great Britain. Used extensively in the Vietnam War, later versions of the aircraft were still active in the U. S. Air Force inventory well into the 1990s. F-4s are no longer in the USAF inventory but are still flown by foreign nations. This texture is for U.S Air Force.
-
Typhoon T1 3D Model
Agile and highly maneuverable, the twin-engine Eurofighter Typhoon is designed to operate from hastily prepared bases and small runways for worldwide operations. It is equipped with an advanced multi-mode radar and an extensive range of sensors and electronic countermeasures. This is a twin-seated Typhoon,the texture is for RAF.
-
Typhoon Italy 3D Model
Agile and highly maneuverable, the twin-engine Eurofighter Typhoon is designed to operate from hastily prepared bases and small runways for worldwide operations. It is equipped with an advanced multi-mode radar and an extensive range of sensors and electronic countermeasures. This is a twin-seated Typhoon,the texture is for Italian Air Force. The following armment are included: Asraam, Aim-9 sidewinder, Aim-120 Amraam, MK-82 Bomb, Laser Guided Bomb, Meteor BVRAAM, Storm Shadow, JSOW.
-
Typhoon Germany 3D Model
Agile and highly maneuverable, the twin-engine Eurofighter Typhoon is designed to operate from hastily prepared bases and small runways for worldwide operations. It is equipped with an advanced multi-mode radar and an extensive range of sensors and electronic countermeasures. This is a twin-seated Typhoon,the texture is for German Air Force. The following armment are included: Asraam, Aim-9 sidewinder, Aim-120 Amraam, MK-82 Bomb, Laser Guided Bomb, Meteor BVRAAM, Storm Shadow, JSOW.
-
F-5 3D Model
F-5 Freedom Fighter, a 1960s US jet fighter produced for export. This texture is for Austria Air Force.
-
F-35 3D Model
The F-35 Lightning II is a 5th Generation fighter, combining advanced stealth with fighter speed and agility, fully fused sensor information, network-enabled operations and advanced sustainment. Three variants of the F-35 will replace the A-10 and F-16 for the U.S. Air Force, the F/A-18 for the U.S. Navy, the F/A-18 and AV-8B Harrier for the U.S. Marine Corps, and a variety of fighters for at least ten other countries.
-
Fokker DR1 Triplane Red Baron 3D Model
During the Great War air combat became the stuff legends were made of. The names and exploits of ace fighters were household names and newspapers printed the latest results of air duels between the German and Allied air forces. Rate of climb and general agility were essential in these aerial combats. After the Sopwith Tri-plane the Luftwaffe had Fokker design and build their own tri-plane, code named DR-1. Possibly the most famous fighting ace of the Great War was Baron Von Richthofen, who led Jagdeskader N¦ 1. He was nicknamed the Red Baron, after the color of the fighter planes he personally flew. The Red Baron was extremely pleased with the Fokker Tri-plane and he managed to increase his duel victories by several before being shot down himself. The Red BaronÆs Tri-plane model is made of silk fabric stretched across a lightweight frame, same as the original. Accents are in aluminum, brass, leather, wood and resin.
-
Azarakhsh 3D Model
Iran was not known to have possessed advanced technology to build fighter planes or tanks. However, In April 1997 Iranian Brigadier General Arasteh, a deputy head of the General Staff of the Armed Forces (serving under Major General Ali Shahbazi, the joint chief of staff) claimed that Iran had successfully designed, constructed, and tested its first fighter aircraft, the Azarakhsh(Lightning). According to one theory, Iran cobbled together an aircraft by reverse-engineered elements from a number of other aircraft. Evidently a modified F-5, this Iranian design evolved from an examination of the wide variety of fighter aircraft in Iran’s inventory [which include both the F-4 and F-5], along with training and experimentation.
-
EA-6b Low Visible 3D Model
The EA-6B Prowler Improved Capability (ICAP) III airborne electronic attack weapon system. ICAP III’s advanced selective-reactive jamming ability focuses jamming power more effectively on specific radar frequencies and counters frequency-hopping radars designed to defeat older jamming systems. The system’s geolocation capability enables it to locate emitters with targetable precision and pass the information to others in the battle management network. The Navy could receive the first ICAP III EA-6B in early 2005. The model include AGM-88 HARM , auxiliary fuel tankand AN/ALQ-99 Tactical Jamming System.
-
Typhoon Saudi Arabia 3D Model
The Typhoon, currently entering service with the RAF, has a price of more than £45m a plane. Saudi Arabia previously bought a fleet of its predecessor Tornados from Britain in the Al Yamamah arms deal. Mike Turner, the chief executive of BAE, Britain’s biggest arms company, was quoted in Flight International magazine on June 21, just before Mr Blair’s Riyadh trip, saying: “The objective is to get the Typhoon into Saudi Arabia. We’ve had £43bn from Al Yamamah over the last 20 years and there could be another £40bn.” Here is a texture for Saudi Arabia.
-
Mosquito Israel 3D Model
The De Havilland Mosquito was a twin-engined aircraft of plywood monocoque construction, designed originally as a fast, unarmed light bomber. The Mosquito served with distinction as fighter-bomber, recconaissance aircraft and nightfighter. It was one of the finest aircraft of WWII, with a versatility only matched by the German Junkers Ju 88. The nightfighter versions remained in production until 1947. The amazingly adaptable design was effective for day and night fighting, day and night bombing, anti-shipping attack, and photo reconnaissance. The texture is for Israel Airforce
-
Cf-18 3D Model
The CF-18 is a multipurpose, high-performance twin-engine fighter that can equally well handle air-to-air (air defence, air superiority, combat air patrol, etc.) or ground-attack (close air support, battlefield air interdiction, etc.) roles, aided by on-board computer systems that can be quickly re-programmed to the mission at hand. (Note: The CF-18 is officially designated the “CF188” in Canadian use, although that identity is rarely employed except in the most official or technical documentation.)
-
Mig-15 3D Model
The Mikoyan-Gurevich MiG-15(NATO reporting name “Fagot”) was a jet fighter developed for the USSR by Artem Mikoyan. The MiG-15 would be one of the first successful swept wing jet fighters. It achieved fame over the skies of Korea, outclassing all UN fighters except for the F-86 Sabre. The MiG-15 would be the starting point for the advanced MiG-17, which successfully downed more advanced American fighters such as the F-105 Thunderchief over Vietnam.
-
F-4E 3D Model
The F-4 was designed in 1958 as a company venture by McDonnell Douglas to meet future needs and it turned into the greatest post World War II fighter ever built. Considered by some the fastest, most versatile and effective aircraft ever built. The F-4 was initially designed as an attack bomber without internal weapons. The Phantom carried a greater bomb load than a B-29, yet was an effective fighter shooting down 106 out of 137 Migs destroyed in the Vietnam War. Israel has used F-4’s in all of its major confrontations, at one time shooting down over 70 Syrian aircraft without a Phantom lost. The F-4E was flown by the US Air Force Demonstration team The Thunderbirds from 1969 through the mid 1970’s. F-4E’s were also flown as aircraft known as Wild Weasels and were active in the Persian Gulf War.
-
JAS-39 3D Model
JAS 39 Gripen is the world’s best light weight multi role combat aircraft in production. It is now fully operational with the Swedish air force with more than 115 (as of Jan 2002) delivered. This texture is for South Africa. x
-
F-18 Australia Air Force 3D Model
Following a successful run of more than 400 A and B models, the US Navy began taking fleet deliveries of improved F/A-18C (single seat) and F/A-18D (dual seat) models in September 1987. These Hornets carry the Advanced Medium Range Air-to-Air Missile (AMRAAM) and the infrared imaging Maverick air-to-ground missile. Two years later, the C/D models came with improved night attack capabilities. The new components included a navigation forward looking infrared (NAVFLIR) pod, a raster head-up display, night vision goggles, special cockpit lighting compatible with the night vision devices, a digital color moving map and an independent multipurpose color display. This texture is for Royal Australia Air Force.
-
Mig-15 Korea 3D Model
The Mikoyan-Gurevich MiG-15 (NATO reporting name ‘Fagot’) was a jet fighter developed for the USSR by Artem Mikoyan. The MiG-15 would be one of the first successful swept wing jet fighters. It achieved fame over the skies of Korea, outclassing all UN fighters except for the F-86 Sabre. The MiG-15 would be the starting point for the advanced MiG-17, which successfully downed more advanced American fighters such as the F-105 Thunderchief over Vietnam. This texture is for Korea Airforce. And the pilot of this mig-15 shot down 7 aircrafts, and demaged 2 aircrafts.
-
Spitfire 3D Model
Deliveries of production Spitfire I’s began in June 1938, just over two years after ‘Mutt’ Summers flew the prototype at Southhampton on the 5th of March, 1936. This model is a Spirfire I. No 609 Sqn’s leading ace, John Dundas used this machine. It attended Battle Of Britain.
-
Mirage f1 3D Model
The Mirage F1 is a defense and air superiority single-seater plane. This revival was made possible by technological advances which permit manufacture of ultra-thin but robust wings, enabling at supersonic speeds flight performance equivalent to that of delta wings. The Mirage F1 is the only fighter which shoot down a F-14 Tomcat in air combat . The texture is for Normandie-Niemen squadron.
-
F-15 3D Model
The texture is for 335th Fighter Squadron ‘Chiefs’. It attends the ‘Enduring Freedom’ operation in Iraq.
-
P-47 thunderbolt 3D Model
Two textures are included.One is “In the mood” and the other is “My Gal Sal”. “in the mood” P-47 was flown by Capt Gerald Johnson.One of five different P-47 ‘razorbacks’ Johnson flew and the first ‘Ace’ from the 56FG. The art work is dirived from the popular Glenn Miller song. Johnson was credited with a total of 16.5 aerial and retired from the Air Force as Inspector General in September 1974.
-
Typhoon Eurofighter 3D Model
Here’s the upgrade version of the next generation European fighter typhoon which we made before. It’s the production type and textures are for Uk, Germany, Itlay and Spain which already equiped typhoon. The following armment are included: Asraam, Aim-9 sidewinder, Aim-120 Amraam, MK-82 Bomb, Laser Guided Bomb, JDAM, Meteor BVRAAM, Storm Shadow, JSOW.
-
Tsr2 3D Model
The British Aircraft Corporation TSR.2 if it had been built, would still be in service today, so great was the initial concept and design. Only 2 examples remain, one at RAF Cosford and one at the RAF museum in Duxford.
-
F-111 3D Model
The F-111 was a multipurpose tactical fighter bomber capable of supersonic speeds. The aircraft was one of the more controversial aircraft ever to fly, yet it achieved one of the safest operational records of any aircraft in USAF history and became a highly effective all-weather interdiction aircraft.
-
Mirage2000 3D Model
The Mirage 2000 is a multi-role single-seater fighter which is in servise in many countries.
-
Jas39 3D Model
JAS 39 Gripen is the world’s best light weight multi role combat aircraft in production. It is now fully operational with the Swedish air force with more than 115 (as of Jan 2002) delivered. three textures are include: 1,Sweden Air Force 2,Czech Air Force 3,Hungary Air Force
-
F18 Collection 3D Model
The combat-proven F/A-18E/F Super Hornet is a next generation strike fighter with all the capability, flexibility and performance necessary to modernize the air or naval aviation forces of any country. Built by the industry team of Boeing, Northrop Grumman, GE Aircraft Engines, Raytheon and more than 2,000 suppliers nationwide, the Super Hornet embodies the newest advances in multimission capability and decades of growth potential. The EA-18G Airborne Electronic Attack (AEA) system was selected by the U. S. Navy to replace the EA-6B Prowler aircraft. A variant of the U.S. Navy F/A-18F two-crew strike fighter, the EA-18G combines the combat-proven F/A-18F strike fighter with the proven Improved Capability III (ICAP III) AEA avionics suite. Include LOCAAS(Low Cost Autonomous Attack System) This model include F/A-18E,F/A-18F and EA-18G
-
J-7 3D Model
J-7G is the most advanced light fighter in China.It is widly used in Beijing, Shanghai, Guangzhou for city defence, and fighting in navy to intercept alien aircraft like F-14, EP-3 and EC-135.It had export to Iraq, Iran, Pakistan etc. The model is highly detailed inclued cockpit, landing gear and PL-8 air to air missile
-
F-a18f 3D Model
The combat-proven F/A-18E/F Super Hornet is a next generation strike fighter with all the capability, flexibility and performance necessary to modernize the air or naval aviation forces of any country. Built by the industry team of Boeing,Northrop Grumman, GE Aircraft Engines, Raytheon and more than 2,000 suppliers nationwide, the Super Hornet embodies the newest advances in multimission capability and decades of growth potential. The EA-18G Airborne Electronic Attack (AEA) system was selected by the U. S. Navy to replace the EA-6B Prowler aircraft. A variant of the U.S. Navy F/A-18F two-crew strike fighter, the EA-18G combines the combat-proven F/A-18F strike fighter with the proven Improved Capability III (ICAP III) AEA avionics suite. Only F/A-18F is included Include LOCAAS(Low Cost Autonomous Attack System)
-
Ea18g 3D Model
The EA-18G Airborne Electronic Attack (AEA) system was selected by the U. S. Navy to replace the EA-6B Prowler aircraft. A variant of the U.S. Navy F/A-18F two-crew strike fighter, the EA-18G combines the combat-proven F/A-18F strike fighter with the proven Improved Capability III (ICAP III) AEA avionics suite. LOCAAS(Low Cost Autonomous Attack System) is also inclued as a separated file.
-
F-A-18E 3D Model
The combat-proven F/A-18E Super Hornet is a next generation strike fighter with all the capability, flexibility and performance necessary to modernize the air or naval aviation forces of any country. Built by the industry team of Boeing, Northrop Grumman, GE Aircraft Engines, Raytheon and more than 2,000 suppliers nationwide, the Super Hornet embodies the newest advances in multimission capability and decades of growth potential. LOCAAS(Low Cost Autonomous Attack System) is also inclued as a separated file. Only F/A-18E is included
-
TyphoonFighter 3D Model
The next generation fighter for Europe. Including stormshadow missile, and all other missiles this fighter can carry. Nine textures are included.
-
F-14 3D Model
F-14 ‘tomcat’ is the best navy fighter in the world. The texture01 is of ‘Jolly Rogers’ The texture02 is of Naval Strike and Air Warfare Center (NSAWC), which has long been a source for uniquely camouflaged aircraft, dating all the way back to its roots when it was known as the Naval Fighter Weapons School (NFWS), ‘Top Gun’, based at NAS Miramar. With Tomcats entering service in the training role as aggressors in the 1990s, it was only natural that they should get some unique camouflages applied to them. This Tomcat is one such example, sporting a blue splinter camouflage intended to represent the blue camouflages of Eastern Block Flankers. The camouflage scheme comes complete with a large white radome, just as found on the Su-27 ‘FLANKER’. The texture03 is of Imperial Iranian Air Force(IIAF) Including full weapons load(AIM-54,AIM-4,AIM-9), cockpit and high resolution textures. Includes specularity map. Fully textured, with lighting setup. This model also includes cockpit, control surfaces, flaps, ailerons, rudder, elevators, landing gear and landing gear doors.
-
F15e 3D Model
The first texture is for 335th Fighter Squadron ‘Chiefs’. It attends the ‘Enduring Freedom’ operation in Iraq. The models also includes the following items: GBU-10 Paveway II 2000lb laser-guided bomb Mk 20 Rockeye cluster bomb AGM-65 Maverick air-to-surface missile AIM-120 AMRAAM medium-range air-to-air missile AIM-9M Sidewinder air-to-air missile LANTIRN system targeting pod Texas Instruments terrainfollwing radar pod AN/ALQ-119 ECM pod The second texture is for Israel Air Force. The models also includes the following items: Adder IV air-to-air missile AIM-120 AMRAAM medium-range air-to-air missile Please contact ucabqji@ucl.ac.uk for more information. All texture is 150 dpi resolution. Considerable space has been contributed to the texture and will not affect the runing speed when using the file.
-
F117 3D Model
The F-117A Nighthawk is the world’s first operational aircraft designed to exploit low-observable stealth technology. F-117 will be used for daytime missions. So the new grey scheme is chosen for f-117 when it operats in the daytime. The model includes Paveway II,Paveway III,Paveway IV and Paveway IV ER.
-
Rafale 3D Model
Rafale M multi-purpose twin-engine combat aircraft The Rafale M, a single-seater designed for seaborne use, carries the same weapon and navigation system. Its airframe has been designed for aircraft-carriers but retains most of the elements of the other versions. Including full weapons load, cockpit and high resolution textures. Includes specularity map. Fully textured. This model also includes cockpit, control surfaces, flaps, ailerons, rudder, elevators, landing gear and landing gear doors.
-
Su-33 3D Model
Sukhoi Su-33 NATO codename: Flanker Carrier-borne Multi-Role Fighter.The Sukhoi Su-33 is a navalized version of the company”s Su-27 originally designed to operate from the Soviet Union”s first class of large aircraft carriers.
-
J-10 3D Model
J-10 the next generation fighter for Chinese Airforce. Very realistic J-10 model for 3ds max 5. Fully textured, with lighting setup. The texture with the model is for Chinese eight-one aerobatic team.
-
Su-34 v2 3D Model
The Su-34 (also known as Su-27IB) fighter bomber has been developed by the Sukhoi Design Bureau Joint Stock Company in Moscow and the Novosibirsk Aircraft Production Association at Novosibirsk in Russia. The Russian Air Force has ordered an initial 18 Su-34 aircraft, with a total requirement for up to 200 aircraft. The first two production aircraft were delivered to the Russian Air Force in December 2006. The Su-34 is expected to enter operational service in 2010.
-
Su-34 3D Model
Very detailed Su-34/Su-32FN, russian maga fighter. The texture is of T-10B-2 type. This model also include all the missiles that Su-34 can carry, such as R-77 AAM, R-73R AAM, Kh-29/L AGM, Kh-31/P AGM, Kh-59 AGM, Kh-59M anti-ship missile, Kh-15PM anti-ship missile, FAB-250ShN/500ShN GP-bomb, RBK-500 munition dispenser weapon, BETAB concrete penetrator, PTAB-1M nti-armor/ShOAB-0.5 anti-personnel EO guided bombs, FAB-250M/500M EO guided bombs,FAB-250M1 laser-guided bombs. Fully textured, with lighting setup
-
Su-47 3D Model
A very detailed Sukhoi SU-47 Berkut experimental forward swept wing fighter. Includes cockpit, landing gear, separate control surfaces and auxilary intake doors.
-
ATD-X 3D Model
A Japanese experimental aircraft for testing advanced stealth fighter aircraft technologies.
