3DHunt.co

Tag: (FC)

  • Lexus LF-FC 2015 3D Model

    Lexus LF-FC 2015 3D Model

    The 3D model was created on real car base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* tire’s texture is not included in the set.* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team

  • Husqvarna FC 450 2017 3D Model

    Husqvarna FC 450 2017 3D Model

    The 3d model based on a real motorcycle, created according to the original dimensions. All model files were “smoothed”. We can provide product files with original geometry by your request.
    All main parts of the model are separated objects. Therefore, you can easy change all materials. We provide several formats for each model, most of them available by default.
    * images rendered with using V-Ray plugin (we don’t include lighting and environment to a set).

  • Soft Mount for Flight Controller (FC) and Power Distribution Board (PDB)

    Soft Mount for Flight Controller (FC) and Power Distribution Board (PDB)

    Summary
    I wanted to design an option for soft mounting my flight controller and power distribution board. These are intended to be printed with a semiflex filament. M3 screws will fit through the holes. I recommend using M3 nylon screws.
    SoftMount_PDBv2 – this model has 4 screw columns. It can be used for a Power Distribution Board, 4-in-1 ESC, or a Flight Controller. Since it only has 4 screw columns, it may still transfer some vibrations- but this option is easy to mount, as it will go directly into your frame (assuming it is for a 36x36mm board, with 30.5×30.5 mounts- this is what most F3/F4 flight controllers, such as the Naze 32 are).
    SoftMount_FC_PDBv2 – this model has 8 screw columns. 4 of the columns are intended to be mounted to your frame, and the other 4 are used to mount your board. When using this mount, you will need to update your flight controller configuration so it knows that your board is rotated 45 degrees.
    Use M3 nylon screws and nuts to secure the screws. You will need a screw long enough to go through the columns for the flight controller. You will need a longer screw for your frame (depending on frame thickness). For the flight controller, I think a 10mm 3M screw should work, and give you enough for a nut, but it would be good to double check.
    Print Settings
    Printer:
    Reach 3D Rafts:
    No Supports:
    No Resolution:
    .2 Infill:
    20% Notes:
    Use a flex filament. I am printing with a Titan e3d extruder and need to print around 15-20mm/sec. This is a tricky print with flex.