– detailed exterior, simple interior.- every object has material’s name, you can easily change or apply materials….max format:Rar archive contains:1. 3ds max 2011 with vray materials, which you can see in preview images studio renders. Carpaint colour can be slightly different. Lighting and render setup included but render results can be different because photoshop was used to correct contrast, brightness, saturation etc.. but Photoshop CS6 macro file (.atn) for post production is also included.2. 3ds max 2011 with mental ray materials, which you can see in preview images on outdoor renders. Carpaint colour can be different. Enviroment not included.3. 3ds max 2011 with simple standard materials scanlineJust put into your scene and render!In each scene model is provided with mesh smooth modifier on stack on objects that need it. Mesh smooth is set 1 or 2 for renders. Exterior and wheels are in different layers…obj format:Rar archive contains two versions of model:1. Exported without collapsing after mesh smooth. Low or med poly mesh which you can see in preview images, good if you need to edit model.2. Exported after appllying mesh smooth. Just import, apply materials and renderSimple materials, textures may have to be added manually…lwo, c4d format:Rar archive contains model exported without collapsing after mesh smooth. Low or med poly mesh which you can see in preview images, good if you need to edit model.Simple materials, textures may have to be added manually. In Cinema 4D some elements may have to be optimized…fbx and .3ds format:Rar archive contains model exported after appllying mesh smooth. Just import, apply materials and render.Simple materials, textures may have to be added manually…Polycount:without meshsmooth max,obj,lwo,xsi,c4d: 500 000 polygonscollapsed fbx,3ds,obj: 2 800 000 faces/ 1 500 000 polygons
Tag: Distribution
-
Mobile rack for electrical equipment 4 3D Model
This mobile rack for electrical equipment 4 high quality, photo real model. The model is accurate with the real world size and scale. The model is suitable for the layout of workshops and production rooms.Ready to RENDER. HDRI map includedHigh quality model for TurboSmoothOriginally created with 3ds Max 2013Model prepared for V-Ray 2.40.03Included in the scene – VRay planeIncludes Formats 3DS, FBX and OBJ (not smoothed)- Model is built to real-world scale- Units used: mm- No third-party renderer or plug-insGeometry:No smooth: -Polygons: 164744-Vertices: 657726Subdivision Level 1-Polygons: 1309460-Vertices: 657726
-
Sonoff Basic – Consumer distribution Unit Rail mount 3D Print Model
Summary
This is a design for mounting the PCB of the Sonoff Basic on the rail inside a consumer distribution box (Mains electric box, power distribution box)
This has not been tested, since my printer is broken for now.
USE THIS AT YOUR OWN RISK
I do not recommend using this in the same box as your power Breakers (MCB, FI, fuses etc.)
Make sure you know what you are doing.
This is technically not the right dimensions as a single slot MCB, since the Relay of the Sonoff is as tall as that, but I didn’t want it to take 2 MCB slots.Requirements
Sonoff Basic PCB:
with a removed push button or shortened push button “shaft” &
and led either bend, or removed,
if you are using one of the designs with the LED and button holes you can use some wire to extend them to the face
4x M3x25 screws
4x M3x18 screws
2x M3x10 screws
6x M3 nuts
4x M3 square nuts
4x M3 washers (optional)
4x Screw terminal crimp (preferably one that has a hole so it doesn’t get of while installing)
1x Small spring -
Mobile rack for electrical equipment 3 3D Model
This mobile rack for electrical equipment 3 high quality, photo real model. The model is accurate with the real world size and scale. The model is suitable for the layout of workshops and production rooms.Ready to RENDER. HDRI map includedHigh quality model for TurboSmoothOriginally created with 3ds Max 2013Model prepared for V-Ray 2.40.03Included in the scene – VRay planeIncludes Formats FBX and OBJ (not smoothed)- Model is built to real-world scale- Units used: mm- No third-party renderer or plug-insGeometry:No smooth: -Polygons: 144618-Vertices: 144386Subdivision Level 1-Polygons: 1149872-Vertices: 577924
-
Equal quantity of hopper 3D Model
Equal quantity of hopper, this institution through a fixed slot design, in the push rod cylinder under the action of the same packing, at the same time in the process of pushing into shipping/installation box, this institution is the typical amount of dispatched institutions for many particles, powder, etc. Products can be used.This model is transformed into step and iges general model download, please refer to!Also includes 3d original files, welcome to download!if you like,you can paypal for you to get this models or if you have any questions also you can email to me.
-
Soft Mount for Flight Controller (FC) and Power Distribution Board (PDB)
Summary
I wanted to design an option for soft mounting my flight controller and power distribution board. These are intended to be printed with a semiflex filament. M3 screws will fit through the holes. I recommend using M3 nylon screws.
SoftMount_PDBv2 – this model has 4 screw columns. It can be used for a Power Distribution Board, 4-in-1 ESC, or a Flight Controller. Since it only has 4 screw columns, it may still transfer some vibrations- but this option is easy to mount, as it will go directly into your frame (assuming it is for a 36x36mm board, with 30.5×30.5 mounts- this is what most F3/F4 flight controllers, such as the Naze 32 are).
SoftMount_FC_PDBv2 – this model has 8 screw columns. 4 of the columns are intended to be mounted to your frame, and the other 4 are used to mount your board. When using this mount, you will need to update your flight controller configuration so it knows that your board is rotated 45 degrees.
Use M3 nylon screws and nuts to secure the screws. You will need a screw long enough to go through the columns for the flight controller. You will need a longer screw for your frame (depending on frame thickness). For the flight controller, I think a 10mm 3M screw should work, and give you enough for a nut, but it would be good to double check.
Print Settings
Printer:
Reach 3D Rafts:
No Supports:
No Resolution:
.2 Infill:
20% Notes:
Use a flex filament. I am printing with a Titan e3d extruder and need to print around 15-20mm/sec. This is a tricky print with flex.