This is inspired by the famous F-14 Tomcat and the F-24 concept from the ATF program. For those who don’t know the F-24 concept is basically a naval version of the F-22 with variable-sweep wing. Unfortunately, it remained as a concept.
Author: Cults3D
-
Hedralight Lighting 3D Print Model
This pretty fully customizable luminaire is intended for a cold E27 bulb (electric kit not provided). It is made up of several pieces that assemble by clipping them (neither glue nor screws). There are several different patterns to choose from. You are spoiled for choice of pattern and color to brighten your interior decoration. You can choose to use this luminaire as a table lamp or as a pendant lamp. For suspension mode, you can also choose it either as a half-sphere or as a complete sphere.
-
Tassimo – Capsule holder 3D Print Model
195mm capsule holder for Tassimo coffee machine.
-
Dodo Guard (28mm/Heroic scale) 3D Print Model
This character was designed for tabletop roleplaying/wargaming.
-
Tripod expansion “Phone stand ” 3D Print Model
size : 185X53X45mm
files : 3 pieces : 7
total print time: 03:00 -
Multi-Color Lego Figure USB Drive Case 3D Print Model
Is that Lego’s head stuck in our computer ?! It definitely looks like it with this multi-color Lego figure USB drive case.
-
Digital Full Dentures for 3D Printing, Milling & Injection Molding 3D Print Model
Digital Full Dentures for 3D Printing, Milling & Injection Molding
-
PERSONALIZABLE PENCIL PORTRAIT SERVAIR EXPLOITATION HIBOUX SERVAIR 3D Print Model
SERVAIR EXPLOITATION HIBOUX SERVAIR
-
SPINNER ULTIMATE (SMALL HOLE) 3D Print Model
This is a classic Spinner model with the smallest gap for all those who have smaller bearings which have a longer turn time, and is more resistant to knocks and falls with a more modern design.
-
BATARANG !!! 3D Print Model
It is the best model of a Batarang !!! With a spectacular design and incredible cutting ability! You can do it the size you want by expanding it !!!
-
Morsmordre (Harry Potter) ‘Pendant’ 3D Print Model
Morsmordre used by Death Eaters, Voldemort’s followers.
This creation can be used as pendant, keychain or whatever you want. -
Model wall shelf (collection) #DAGOCULTS 3D Print Model
Wall shelf for figurines (collection)
This shelf makes it possible to arrange and to classify all type of collection.
Shelf can be expanded according to your needs.
The total printing of this shelf requires a printer with a tray of at least 70 * 70 cm.
However, a printer with a 20 * 20 cm tray is enough to print one of the four pieces of this shelf
#DAGOCULTS -
Custom-made figurine shelf (collection) #DAGOCULTS 3D Print Model
This piece of furniture allows to organize and classify all types of collection (figurine).
This piece of furniture can be enlarged according to your needs.
Each piece of this piece of furniture is printed on any printer with at least one 20 * 20cm tray.
The two different pieces of this piece of furniture fits perfectly together and allow them a perfect balance of this piece of furniture.
#DAGOCULTS -
Digital Complete Dentures 3D Print Model
Digital Full Dentures
3Shape & KeyShothttps://www.youtube.com/watch?v=ZyzmojMMLLQ -
Star Wars – Stencil – Darth Vader 3D Print Model
http://horizonlab.co/2017/08/25/star-wars-stencil-darth-vader/
-
Private property – Sign – 3D Print Model
Panel size 10x15cm “Private property” that you can print in red with a white handwriting.
Simply change the filament when the letters are printed. -
Betyár – Hungaryball 3D Print Model
Say hi to Betyár, the second Hungaryball in my countryball series. Betyárs who were usually very skilled horsemen were the outlaws and highwaymen of the 18th and 19th century Hungary. Several of them have become legendary figures who in the public mind fought for social justice. Their curly mustache and typical hat are still an important part of the Hungarian folklore.
-
audiotape 3D Print Model
Hey i came back with another audio tape i change the “hole” by a tiny one on the top of the audio tape. Maybe you’re able to find it, and place string, or anything else … for your keys!
-
Customizable Retro Lightbox 3D Print Model
This is a customizable 3D model, where you can print your own retro lightbox. These boxes normally costs >20 bucks, a printed one costs me about 5 dollar.
-
Single Homebrew Bottle Dryer 3D Print Model
I`ve had some complaints from home that i leave my homebrew bottles standing on the counter for to long.
-
Digital Dental Dayguard Splint 3D Print Model
Digital Dental Dayguard Splint
3Shape Appliance Designer & KeyShot Pro -
Fairy for children’s room 3D Print Model
From a drawing, here is a pretty fairy who will take care of your child’s sleep.
-
Tool for cleaning a bicycle cassette 3D Print Model
I am a happy owner of a 29 “bike in monoplateau (11-speed rear derailleur), a Camber from Specialized (this bike is a killer)
-
Bed Shelf 3D Print Model
Shelf of tubular superposed bed of 20 in diameter.
we move it as we like, fix a lamp etc ….
#DAGOCULTS -
Drive Pulley 3D Print Model
Drive pulley 100 * 100 mm.
Created from a few geometric shapes.
Can be used as a component of a construction project.
I can create the shaft that goes with it and a sprocket. -
Drawing and multiplication rule Multiplitrace 3D Print Model
On a ring, several rules for drawing patterns are proposed with on each of them a multiplication table from 1 to 10. Playful and educational, this tool will allow your child to retain his multiplication tables while having fun !
-
Digital Dental B Splints 3D Print Model
Digital Dental Rendered “B” Splints
3Shape Appliance Designer & KeyShot Pro -
Zombie Digging Out 3D Print Model
My little zombie climbing out to play,
I printed this with a Mbot sure could use a
#DAGOCULTS -
Tooth Brush, Toothbrush, Toothbrush holder 3D Print Model
#DAGOCULTS
Toothbrush holders, children always close and fun to brush teeth, all neat. Toothbrush holder. Glass toothbrush
-
Customizable Sanding Stick 3D Print Model
I’ve created this OpenSCAD, where you can customize your sanding stick. Even the needed screws are printable. You only need some sandpaper (sheet or strip) and the 4 printed parts.
-
Rollei QAL-40 Camera Mounting Plate (C4i, C5i, C40i, C50i, Compact Traveler No 1, Compact Traveler No 10, CT-4A, CT-5A, CT-5C, M5 Mini, PGA-584, PGA-484, TT-1, T2S) 3D Print Model
I needed another mounting plate for my Rollei Compact Traveler No. 1 tripod and measured the dimensions and hacked it into Fusion360. The Model also includes the 1/4″ thread for the camera mounting screw.
-
VITABRI Tent Spare Parts 3D Print Model
Hello,
Here is the STL model of a corner piece of VITABRI 3×4.5 folding tents.
The part has been tested (see photo). It is to my knowledge unsold and you will find it here only! -
Cache web cam apple 3D Print Model
Webcam cover for iMac apple to print and heat with a lighter to twist the rear tab.
-
Helmet-3 Rys-T PUBG Keyring Pendant 3D Print Model
Hey Winner! Are you ready for some Chicken Dinner?
I’m a big fan of PUBG. It was so fun to make this Helmet for 3D printing! Enjoy your Chicken!
Separated version and One Piece version are included.
Length: 54.62mm (2.15 in) -
Customizable Paw-like Fidget Spinner (pick-a-weight) 3D Print Model
Customizable Paw-like Fidget Spinner (pick-a-weight)
Customize to select: -
Customizable Edgy Yin Yang Fidget Spinner (pick-a-weight) 3D Print Model
Customizable Edgy Yin Yang Fidget Spinner (pick-a-weight)
Easy to Customize -
Customizable Fidget Spinner 608 Bearing Caps 3D Print Model
Customizable Fidget Spinner 608 Bearing Caps
Customize: -
Customizable GoPro Knuckle Grip 3D Print Model
Customizable GoPro Knuckle Grip
Customize: -
Hex Triple Triple Fidget Spinner 3D Print Model
Hexagonal Triple Armed Triple Nut Fidget Spinner
Notes:
Uses ONE 608 bearing and NINE 5/16″ or M8 hex nuts
Might not fit in a smaller hand
I like using vise grips to install hardware
if a nut is loose in a PLA frame, dip nut in frame into hot water to shrink frame around nut
See my collection of all of my fidget spinner designs. -
What-the-Hex (pick-a-weight) Fidget Spinner 3D Print Model
What-the-Hex (Pick-a-Weight) Fidget Spinner
Easy to Customize
Select number of rays: 2 through 6
Select number of hexagons per ray: 1 through 4
Select type of weight: 608 bearings; 5/16″, 3/8″, 1/2″, M8, M10, or M12 hex nuts; 3/8″, 1/2″, or 5/8″ loose ball bearings
Select the radius (edge curve)
Notes:
nuts larger than 5/16″ or M8 will protrude but I didn’t want to require supports or have an asymmetrical frame
I like using vise grips to install hardware
if a nut is loose in a PLA frame, dip nut in frame into hot water to shrink frame around nut
See my collection of all of my fidget spinner designs -
Customizable Lego-like Fidget Spinner & Hex Nut Brick 3D Print Model
Lego-like Fidget Spinner & Hex Nut Brick
Not curvy, not smooth; a different spin on fidget spinners
concept by: bigpizzle -
The Rice Cube – Special Makis 3D Print Model
A cube to make his own makis without breaking his head and clean.
You will be able to make nice dishes during your evenings Makis. -
om nom 3D Print Model
created during a live stream on www.twitch.tv/sparkyface5
-
Oculus touch leg support 3D Print Model
I have emade this model to stick my oculus touch to my legs in order to walk in my vr app 🙂
-
Dark Vador showerhead 3D Print Model
Two pieces for better printing. Print and glue together.
Head needs support. -
Fishing gear 3D Print Model
Here is a fishing box to install in a boat.
This allows you to hook your hooks. -
Annie and Clarabel – Thomas & Friends 3D Print Model
Annie and Clarabel! Finally some coaches for the Printable Thomas the Tank Engine:http://cults3d.com/en/various/thomas-the-tank-engine-thomas-friends
-
FIGURINE RABBIT 3D Print Model
I present to you various figurines of RABBIT for decorated your interior, ideal for a room of child 5 in all
-
Furniture (surf on the wave) 3D Print Model
Furniture that resembles a wave that can accept screws and small jewelry.
-
EVA Pod from 2001: A Space Odyssey 3D Print Model
OK, so a while ago and number of the Hutt City Library Staff and I tackled the huge task of printing the magnificent Discovery Model (https://www.thingiverse.com/thing:950664) that was created by metaform3d (https://www.thingiverse.com/metaform3d/about). In my opinion, metaform3d’s model is one of the best designed 3D printing models I have ever come across. I learned a lot about good design from working with this project. Anyway, I was keen to print off the EVA pod that also featured in the same films (2001: A Space Odyssey and 2010 Odyssey 2) as a separate project. I had seen a number of models on Thingiverse, but they were just the an STL version of the model that has been circulating around the web since the Internet was created. I see that some people have succeeded in printing them, but the digital model is very poor quality and for most slicing programs, not printable. It was also fairly low polygon.
-
Box of pocket (for cigarette or other ..) 3D Print Model
A pocket box that can hold cigarettes or something else.
-
PUZZLE 3D 3D Print Model
THE SAME PART THAT FITS IN ALL THE POSITIONS.
TO MAKE THE PUZZLE THE BIGGER THAN YOU WANT. -
twingo 3D Print Model
Twingo old model rearview mirror that does not fit on the body of the car otherwise the car itself imprints well
-
Chromatik 750g vertical spool 3D Print Model
Having just bought my first 3D printer, I realized my first impression by printing the Dagoma horizontal roller. Not practical. For coils with a diameter of 200 mm of Chromatik, the filament relaxes and releases the blanks of the coil which can jam. Having two bearings that did not serve, I had the idea to design my own unwinder.
-
Cutlery 3D Print Model
Responsible for a multipurpose room, the counting of dishes to) the inventory is long and tedious especially since the cutlery provided to the users were so far supplied in pack of 10 by means of an elastic.
So I designed cutlery boxes for 20 tablespoons, 20 forks, 20 knives and 20 teaspoons.
One box is composed of:
– 2 PVC brackets 54×30 of length 500 mm
– 2 PVC brackets 54×30 of length 240 mm
– 1 500×240
expanded PVC sheet – 1 printed corners
– 8 different combs -
Crystal Nightlight 3D Print Model
Keep things that go BUMP in the night at bay with a glowing crystal nightlight!
-
Taxi driver – Stencil 3D Print Model
http://horizonlab.co/2017/08/18/robert-de-niro-stencil-taxi-driver/
-
Digital Full Dentures for 3D Printing 3D Print Model
Digital Full Dentures for 3D Printing
3Shape Dental System & KeyShot Pro -
Light hook 3D Print Model
Hook style adjustable by a small screw of 2.5
the best is to tap but one can create the step by doing it with the screw itself.
3 pieces: 1 fixed on board eg 1 wall with hook the other without (invisible)
fixing screws 3mm max with tapered head of 90 ° angle (eg agglo screw)
object attention lightweight -
LETTERS DECORATION 3D Print Model
I realized all the letters of the alphabet of a size of 14 to 16 cm each.
-
Water pump 3D Print Model
Working 3D printed pump very simple to make, just 3 parts. More info here:https://www.instructables.com/id/3D-Printed-Water-Pump/https://www.youtube.com/watch?v=qX5YHNfzSao
My Facebook: https://www.facebook.com/Nikodem-Bartnik-1891157704439330/ -
The sphere 3D Print Model
This object is an association of different elements including discs representing a mystical cage, a circle for the base as everything begins somewhere, a sphere for the mystery, and finally, the cherries on the cake, a jewelry to give to the whole A divine side.
It could be said that this object represents the life of today:
A carapace containing a heart and above ….
Finally brief good work for a beginner! -
Your Trophy 3D Print Model
Everyone has the right to reward themselves, right?
Print out this trophy and celebrate your victory.
You can also reward someone else. -
Signal 3 Lights signaling Semaphore 3D Print Model
A 3 lights signal.
The semaphore is disconnected from its base for easy access when wiring or repairing the LEDs.
