Download 3D Model Low-Poly Hulk 3D Print 3D Model

3D PRINTING PARAMETERSLow Poly Hulk- 6 “tall (153.6mm)- Multi-part Assembly (Head, Body, Arms, Hands, Thighs, Feet, and Cylinders)- The Low Poly Hulk shown in the photos was printed on a Makerbot 2 duplicator at 200 micron PLA filament. The head was printed at 100 microns.- I recommend printing ‘Head_Front’ for a better facelift on the face, but if this orientation is not stable on your print bed, then use ‘Head_Up’.- All parties need support except the upper feet and legs. The body will have a minimum of support.- Before painting the acrylic paint, I sprayed Adhesion Promoter by Duplicolor. These are not required for acrylic painting on these parts.- Acrylic paints: Apple pie (green), purple, black, and white- After painting, I super-glued hands on the arms, feet to the thighs, and the head of the body.- I used neodymium magnets to connect the arms and upper legs of the joint body. The magnets are 9 mm in diameter and 4 mm thick. If you do not have these magnets, I understood ‘Cylinders’ to connect the pieces. Choose which tolerance is the best solution for your 3D printing.- I have provided screenshots to show the orientation of each part on the platform of the 3D printer.