Summary
This is a shorter camera mount to fit a Runcam2 (or similar) on the top deck of an Eachine Wizard without limiting the room for the battery (up to 3S 1800 mAh).
Printed in ABS.
Tag: X220
-
Eachine Wizard X220 Runcam2 Mobius camera mount small 3D Print Model
-
Wizard x220 POD with screw silos 3D Print Model
Summary
Haven’t gotten to print it yet but I have spent hours designing it in fusion. The dimensions are solid. There are “screw silos” to hold down the pod, insert a 3m nut into the area designed for it, screw the screw in from the bottom to hold it down. There are two versions, a 20mm stack and 30mm stack option. The camera holes were designed to offer up to 45 degree camera angle for a runcam swift 2 or similar casing. I would recommend printing in TPU semi flex, or nylon if your printer is calibrated well. There is very little margin left for error in printing when in a hard material. -
Eachine Wizard X220 POD 3D Print Model
Summary
Remix of spaceone pod. Not pretty, and haven’t even tested to see if this fits or not. Made to replace top section of drone. The battery will have to be bottom mounted. Havent figured this one out yet. Work in Progress