Summary
Per a request, here’s a Nebraska fidget spinner that I came up with. This spinner uses (3) 1/2″ ball bearings and (1) 608 skateboard bearing. This spinner is about 3-1/2″ in diameter overall.
I would heat up the print and ball bearing with warm water and the bearings will slip in.
Print Settings
Printer Brand:
PowerSpec Printer:
PowerSpec 3D Pro Rafts:
Doesn’t Matter Supports:
No Resolution:
0.2mm Infill:
50%
Tag: Wingnut2k
-
Nebraska Fidget Spinner – Wingnut2k 3D Print Model
-
Deadpool Enforcer Fidget Spinner – Wingnut2k 3D Print Model
Summary
Per a request, here’s a Deadpool Enforcer fidget spinner that I came up with. This spinner uses (3) 1/2″ ball bearings and (1) 608 skateboard bearing. This spinner is about 3-1/2″ in diameter overall.
I would heat up the print and ball bearing with warm water and the bearings will slip in.
Print Settings
Printer Brand:
PowerSpec Printer:
PowerSpec 3D Pro Rafts:
No Supports:
No Resolution:
0.2mm Infill:
50% -
Teen Titans Raven Fidget Spinner – Wingnut2k 3D Print Model
Summary
Well, it was kind of a request, here’s a Teen Titans Raven fidget spinner that I came up with. This spinner uses (3) 1/2″ ball bearings and (1) 608 skateboard bearing. This spinner is about 3-1/2″ in diameter overall.
I would heat up the print and ball bearing with warm water and the bearings will slip in.
Print Settings
Printer Brand:
PowerSpec Printer:
PowerSpec 3D Pro Rafts:
No Supports:
No Resolution:
0.2mm Infill:
50% -
LA Dodgers Fidget Spinner #2 – Wingnut2k 3D Print Model
Summary
Per a request, here’s an Los Angeles Dodgers fidget spinner that I came up with. This spinner uses (3) 5/16″ nuts and (1) 608 skateboard bearing. This spinner is about 3-1/2″ in diameter overall.
Print Settings
Printer Brand:
PowerSpec Printer:
PowerSpec 3D Pro Rafts:
Doesn’t Matter Supports:
Doesn’t Matter Resolution:
0.2mm Infill:
50% Notes:
If your printer can’t bridge over the holes for the nuts, you will need supports. -
LA Dodgers Fidget Spinner #1 – Wingnut2k 3D Print Model
Summary
Per a request, here’s an Los Angeles Dodgers fidget spinner that I came up with. This spinner uses (3) 5/16″ nuts and (1) 608 skateboard bearing. This spinner is about 3-1/2″ in diameter overall.
Print Settings
Printer Brand:
PowerSpec Printer:
PowerSpec 3D Pro Rafts:
Doesn’t Matter Supports:
Doesn’t Matter Resolution:
0.2mm Infill:
50% Notes:
If your printer can’t bridge the holes for the nuts, you will need supports. -
Dallas Cowboys Helmet Fidget Spinner – Wingnut2k
Summary
Per a request, here’s a Dallas Cowboys Helmet fidget spinner that I came up with. I did take some liberty and made the star 3D. This spinner uses (3) 1/2″ ball bearings and (1) 608 bearing. This spinner is about 3-1/2″ in diameter overall.
If you want to print his with the star in a different color, you can start printing it after 8mm. The top 1mm is just the star. If you want to print the helmet in a different color, the helmet starts at 7mm.
Print Settings
Printer Brand:
PowerSpec Printer:
PowerSpec 3D Pro Rafts:
No Supports:
No Resolution:
0.2mm Infill:
50% -
Baseball Fidget Spinner – Wingnut2k #2
Summary
Per a request, here’s another Baseball fidget spinner that I came up with. This spinner uses (4) 608 skateboard bearings. This spinner is only about 3-1/2″ in diameter overall.
I’ll upload a picture when I get a chance to print one.
Print Settings
Printer Brand:
PowerSpec Printer:
PowerSpec 3D Pro Rafts:
No Supports:
Yes Resolution:
0.2mm Infill:
50% Notes:
Make sure to turn on the supports for the holes behind the baseballs. -
Flower Fidget Spinner – Wingnut2k
Summary
Here’s a Flower shaped fidget spinner that I came up with. This spinner uses (5) 1/2″ ball bearings and (1) 608 bearing. This spinner is about 3″ in diameter overall.
I’ll upload a picture when I get the print finished.
Print Settings
Printer Brand:
PowerSpec Printer:
PowerSpec 3D Pro Rafts:
No Supports:
No Resolution:
0.2mm Infill:
50%