3DHunt.co

Tag: webcam

  • Lowpoly Cam Free 3D Model

    Lowpoly Cam Free 3D Model

    Lowpoly cam for computer

  • Tripod Mount for Creative VF0790 Webcam 3D Print Model

    Tripod Mount for Creative VF0790 Webcam 3D Print Model

    Summary
    Just add a 1/4in-20 nut to the center
    Print Settings
    Rafts:
    Doesn’t Matter
    Supports:
    Yes

  • Web Camera 3D Model

    Web Camera 3D Model

    Microsoft LifeCam HD webcam web camera cam web-cam internet video phone pc computer USB accesories device screen image spycam

  • Microsoft HD Webcame 3D Model

    Microsoft HD Webcame 3D Model

    HD Quality=HD camera

  • Webcam mount for 2020 rail. 3D Print Model

    Webcam mount for 2020 rail. 3D Print Model

    Summary
    I made this mount to mount a cheap YoLuke webcam from Amazon on my 3D printer. The printer has an Octopi setup on it and I wanted to be able to check up on prints for anywhere in the house.

    Hardware needed:
    Reused the hinge pin from the Webcam
    2 x 3mm x 8 screws
    2 x 3mm t slot nuts.
    Print Settings
    Printer:
    Tronxy X5S Rafts:
    No Supports:
    No Resolution:
    .2 Infill:
    25

  • Microsoft LifeCam VX-800 3D Model

    Microsoft LifeCam VX-800 3D Model

    Microsoft LifeCam VX-800Features:- High-poly;- Photo-realistic model;- Real world size;- Original file format – Maxon Cinema 4d R15;- To all materials in a scene names are appropriated;- Coordinates of the location of the model in space (x0, y0, z0);- Files with the model does not contain extraneous or hidden objects (lights, cameras, etc.);- Model ready for animation;- Model is suitable for interior visualization.

  • Anet A8 – Logitech C310 Webcam Nozzle Mount 3D Print Model

    Anet A8 – Logitech C310 Webcam Nozzle Mount 3D Print Model

    Summary
    This is a small bracket for mounting a Logitech C310 webcam to the print head of your Anet A8 so that you can monitor the print nozzle. Since it simply inserts into the bearing this might work on other printers with similar design. But I cannot guarantee that.

    Here is a youtube video showing it in action. As you can see it can make a pretty detailed image of how your nozzle is performing.
    Also, this is designed for a fairly stock Anet A8 and it just barely clears the frame and other parts while homed. If you’ve made major modifications to your A8 this might not work and you might have to alter the stl file.
    As you can see from the photos you’ll have to remove the casing of the webcam and get to the bare electronics. This can be tricky for the inexperienced. There is a wire soldered to the board that has to be un-soldered and re-soldered. If you break your webcam it’s not my fault, obviously.
    Important note: There is a dab of glue on the side of the main lens that holds it at a certain focus distance. You’ll have to remove that dab of glue with a small pick of some kind. After that you can screw the main lens in and out to change the focus distance. Here is a video showing that.https://www.youtube.com/watch?v=v-gYgBeiOVI
    Print Settings
    Printer:
    Anet A8 Rafts:
    No Supports:
    No Resolution:
    0.2 mm Infill:
    100%

  • Cache web cam apple 3D Print Model

    Cache web cam apple 3D Print Model

    Webcam cover for iMac apple to print and heat with a lighter to twist the rear tab.