3DHunt.co

Tag: w

  • Modular mini-window holder w/ blinds 3D Print Model

    Modular mini-window holder w/ blinds 3D Print Model

    Summary
    Are you looking for a modicum of privacy in your bathroom or office while keeping the breeze flowing, all without paying for highly customized blinds? Well, look no more (except at an angle)… your modular window-holder-upper blinds are here.
    These panels fit together well, with enough space to slightly alter their angle, yet fit flat enough to glue (or not) anytime. These panels are 133mm length (in order for my 533mm windowsill to have an equal 4 across) by 140mm tall, by 15mm depth (fits into the slot under the window).
    You can certainly shorten or expand the length as you need. (I’ll create a customizer if there are requests, otherwise any tool should allow this).
    The ‘pyramids’ at the top of the print is my (successful) attempt to avoid supports. Only supports printed are at the very bottom cylinder opening.
    Note: Your view may vary.
    Print Settings
    Printer Brand:
    Printrbot
    Printer:
    Printrbot Simple Metal
    Rafts:
    No
    Supports:
    Yes
    Resolution:
    0.3
    Infill:
    15%
    Notes:
    I printed at 10% infill, and it works, but I’d recommend 15%. I also did 8000mm/min speed, which slightly shows every-other-layer back and forth issues. 6k would probably work better. Even at 8k/10%, 4 of these took ~10 hours to print and 1/3rd of a 1kg spool.

  • ITEM-THING W/ HOLES 3D Print Model

    ITEM-THING W/ HOLES 3D Print Model

    Summary
    ITEM-THING W/ HOLES
    Print Settings
    Printer:
    MP SELECT MINI
    Rafts:
    Doesn’t Matter
    Supports:
    Yes
    Resolution:
    0.001
    Infill:
    NO

    How I Designed This
    IDK PLUS AUTOCAD

  • Extended RPi Zero W Einsy Door + Hub Mounts 3D Print Model

    Extended RPi Zero W Einsy Door + Hub Mounts 3D Print Model

    Summary
    Milo5000’s Einsy case mod was great but I was having issues putting in my RPi with a heatsink mounted. The modded lid allows for a heatsink extending at least 4mm above the MK3 PI frame so around 7mm total in height for the heatsink. The additional space also allows for easier removal of the SD card with pliers or really precise fingers.
    I have also included two different sizes for hub mounts. One fits a 26mm X 18mm X 61mm hub which I use for just ethernet connectivity. The larger one fits a 31mm X 21mm X 96mm hub which has 3 usb ports and an ethernet ports.

  • Pi Zero W 3D Print Model

    Summary
    A lot of my robotics projects make use of the pi zero w (especially since my local MicroCenter sells them for <$5). I use this mock up for when I’m working with tight placement / clearances.
    It’s made in openscad so many of the dimensions and tolerances are easily customized.
    You can checkout some of my other projects on github.com/avirtuos

  • 3DR Solo Retractable Landing Gear Pads w/ Payload Release 3D Print Model

    3DR Solo Retractable Landing Gear Pads w/ Payload Release 3D Print Model

    Summary
    This attaches to the Solo’s Accessory Bay mounting holes. It can be used with or without a small breakout board like the Brownie Boards Nano. Extra space inside can contain all the wiring.
    The 9G servo slides in and is held in by the unit being screwed to the Solo.
    It you remove the pins from the connectors you can push the retract wires through the holes.
    The info here will help you get it wired and working.https://www.hackster.io/phantom-phreak-7ccfe4/extend-3dr-solo-accessory-bay-be4073
    This is the small breakout board I like.https://store.brownieboards.com/product/3dr-solo-nano-breakout-board/
    Print with supports. Doesn’t require much infill. Most of the empty space it made to hold the wires.

  • DV Mega Case for Raspberrypi Zero W 3D Print Model

    DV Mega Case for Raspberrypi Zero W 3D Print Model

    Summary
    I have a Raspberrypi Zero W running MMDVM through a DVMega and printed a case that I thought I would share.
    It’s a bit tricky to print and it’s fiddly to connect the DVMega through the case to the raspberrypi, but once together it works great.
    The bottom half is this
    https://www.thingiverse.com/thing:1160140
    I hope it works for you but it is a bit tricky as the shape is complex.
    73’s

  • Octoprint discoeasy 200 pi zero W case 3D Print Model

    Octoprint discoeasy 200 pi zero W case 3D Print Model

    Summary
    Coque pour octoprint sur Raspberry Pi ZERO W sur discoeasy200 a fixer sous l’écran
    photos a venir

  • Raspberry Pi Zero (W) Mount Bracket for Anet A8 3D Print Model

    Raspberry Pi Zero (W) Mount Bracket for Anet A8 3D Print Model

    Summary
    Raspberry Pi Zero (W) Mount Bracket for Anet A8.
    Remove the top two main board screws on the Anet A8 and replace the plastic distances with this mount bracket. Use four M3x8mm screws to secure the Raspberry Pi Zero to the mount bracket.
    Print Settings
    Printer:
    Anet A8 Rafts:
    Doesn’t Matter Supports:
    Doesn’t Matter Resolution:
    0.2mm Infill:
    20%

  • 30.5 X 30.5 MM Mount for FS-iA6 Reciever w/ Antenna Tubes 3D Print Model

    30.5 X 30.5 MM Mount for FS-iA6 Reciever w/ Antenna Tubes 3D Print Model

    Summary
    Receiver mount and antenna tubes for FlySky i6 Receiver, the FS-iA6. Designed to fit on the 30.5 X 30.5MM Mounting standard. I printed the antenna tubes one at a time vertically with 6 lines of raft, and then tapered the ends with sandpaper by hand for a tight fit into the base. Recommend 100% infill. .20mm layer height.

  • Laser cut Forest Frame w/ Squirrel 3D Print Model

    Laser cut Forest Frame w/ Squirrel 3D Print Model

    Summary
    Remix of laser cut forest frame with the addition of a little squirrel and a nut
    3 mm wood

  • CGAxis Models Volume 76 Trees X C4D 3D Model

    CGAxis Models Volume 76 Trees X is a collection containing 32 high polygon 3d models of deciduous trees in various shapes and sizes. You can find in it: norway maples, red lapachos, red oaks, red maples, ginkgo trees, tulip trees, etc. Models are mapped and have materials and textures.Available file formats: Cinema 4D R11 Cinema 4D R11 VRay

  • mini tripod w spring ratchet 3D Print Model

    mini tripod w spring ratchet 3D Print Model

    Summary
    a mini tripos that uses spring ratchets to hold the legs in place. the legs snap into place as does the platform, into the base. the tripod swivels and holds via friction fit.

  • CTC Prusa i3 Pro B (E3D V6 Mount w/ Radial Fan mount) 3D Print Model

    CTC Prusa i3 Pro B (E3D V6 Mount w/ Radial Fan mount) 3D Print Model

    Summary
    Created using TinkerCAD.
    This mount was created to allow a 40mm radial fan to be attached to the front of the mount. The mount connects to the original carriage. It allows for a zip tie to be placed in order to hold all wiring.
    Print Settings
    Printer:
    CTC Prusa I3 Rafts:
    No Supports:
    Yes Resolution:
    .3mm Infill:
    60% Notes:
    Rotate top 180 degrees for the print.

  • A building model of a building in the wilderness 3D model 3D Model

    A building model of a building in the wilderness 3D model 3D Model

    There are three versions of the file format: the 3DSMAX2014 format 3DSMAX2011 format FBX format

  • Cannon 3D Model

    Cannon 3D Model