3DHunt.co

Tag: vtx

  • MRM Reaper VTX Mount 3D Print Model

    MRM Reaper VTX Mount 3D Print Model

    Summary
    Multi Rotor Mania (MRM) Reaper VTX antenna mount designed for TBS Unify Pro. I have two designs. The first one I did has the antenna pointing up slightly for better antenna orientation during flight and second one points down and under the blades for better protection from gate strikes. Photo is the down position version. I also added a tab to zip tie the battery leads out the back and help protect the solder pads of the FC/PDB during a battery eject crash 🙂
    Print Settings
    Rafts:
    No Supports:
    No Resolution:
    .2 Infill:
    30%
    Post-Printing
    Your will need to clear out the holes for the stand offs. I used a #8 drill bit for this.

  • Toyota 86 GT VTX 2013 3D Model

    Toyota 86 GT VTX 2013 3D Model

    The 3D model was created on real car base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* tire’s texture is not included in the set.* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team

  • Concept 6 Vtx pigtail mount. 3D Print Model

    Concept 6 Vtx pigtail mount. 3D Print Model

    Summary
    Made a simple mount to hold a Unify pro pigtail out the back of the BBFPV Concept 6 frame.
    Print in TPU at 100%
    Designed so the rear can move so when you crash it takes part of the impact instead of it all going to your antenna.

  • S800 Reptile 2G4 VTX Cover 3D Print Model

    S800 Reptile 2G4 VTX Cover 3D Print Model

    Summary
    Just a quick mod of my VTX cover to incorporate the 2.4 VTX I’m planning on adding in rev 2. Shows off the VTX nicely and give access to all the dip switches. I plan on using hot glue or similar to mount the VTX, currently not sure how hot it will get for the hot glue but hopefully should be fine.

  • Alien 45 degree vtx mount version2 3D Print Model

    Alien 45 degree vtx mount version2 3D Print Model

    Summary
    redid after holes of version 1 didnt line up, changed my print angles to see what looks better.