Summary
Bulbasaur (Bisasam) Voronoi Style. Please share your results.
Tag: voronoi
-
Bulbasaur Voronoi Style 3D Print Model
-
Demon Bust Voronoi Style 3D Print Model
Summary
Demon Bust Voronoi Style. Please share your results. -
Concentric Voronoi Egg 3D Print Model
Summary
This is one of @Antonin_Nosek easter eggs, taken 3 times and scaled to make it more complex. -
Voronoi Easter bunny fixed with opening 3D Print Model
Summary
This is a Remix of the Voronoi Easter bunny fixed.
I’ve simplified it so it can be edited in TinkerCad and the added a locking mechanism (Remix of: https://www.thingiverse.com/thing:1173662) so it can be filled with goodies – and they can be taken out without destroying the Bunny. Sorry, Enzi1984, I liked your Idea but I hate to “kill” my prints 😉
His make: https://www.thingiverse.com/make:325019
All credits go to the original creators of the models, I’ve only added them together.
When printing the “inner” part make sure to reduce the size a bit, depending on the tolerances of your printer.
If someone could clean up the model a bit I’d be grateful. This is my first design and I’m still fighting with the Details.
Print Settings
Printer:
Anet A8
Rafts:
No
Supports:
No
Resolution:
0.1 or 0.2 mm
Infill:
none
Notes:
when printing the inner part of the lock make sure to reduce the size a bit, depneing on the tolerances of your printer. For me 95% seem to work fine. -
Christmas Bell – Voronoi Pattern 3D Print Model
Summary
My 2nd Voronoi christmas design.
https://www.instagram.com/p/Bc4RsixAvDA/?taken-by=tondanosek
fast christmas gift.
This one is special, because the ball is assembled to bell. 🙂
Print Settings
Printer Brand:
Prusa Printer:
i3 MK2S Rafts:
No Supports:
No Resolution:
0.2 mm Infill:
0% Notes:
Be sure that your bed preparation was done properly. Dont be affraid of big adhesion. This is important to get small ball on the right place.
For PLA
210/55 first layer
200/50 other layers (lower temp of nozzle because of stringing)
Retraction – 1.2 mm
Z lift – 0 mm
Perimeter speed – 30 mm/s
Non Printing moves – 200 mm/s
This settings will avoid stringing. -
SOLO FINGER PEN 3D Print 3D Model
This mechanical finger can be very fun to play with, but can eventually be used as a prosthesis for someone with missing one thumb or other fingers. Additional pieces needed: a flexible stylus insert “BIC”. Four (4) M3 x 10mm screws with washers. Other small screws can be replaced.3D PRINTING PARAMETERSBrand of the printer:MakerBotprinter:Replicator MakerBot 2Xboats:YesSupports:YesResolution:0.02Filling:25%Remarks:Support is a must. I positioned the models at an angle that worked well for me.I recommend 3 shells for the thickness of the wall.PostpressSome cleaning will be required, depending on the type of media used.
-
voronoi lighting 3D Print Model
voronoi luminaire
Three-piece + foot
Modular in 2 parts
Modular in size
Wall or luminaire -
Math Object 0043 3D Model
-The 3dsmax scene file contains the base mesh with OpenSubDiv modifier applied.-The OBJ contains the base mesh only. No subdivisions applied.-The STL file is the subdivided hi-res geometry only.- 3D Print ready- Motion Graphics ready
-
Math Object 0040 3D Model
-The 3dsmax scene file contains the base mesh with OpenSubDiv modifier applied.-The OBJ contains the base mesh only. No subdivisions applied.-The STL file is the subdivided hi-res geometry only.- 3D Print ready- Motion Graphics ready
-
Math Object 0036 3D Model
-The 3dsmax scene file contains the base mesh with OpenSubDiv modifier applied.-The OBJ contains the base mesh only. No subdivisions applied.-The STL file is the subdivided hi-res geometry only.- 3D Print ready- Motion Graphics ready
-
Math Object 0030 3D Model
-The 3dsmax scene file contains the base mesh with OpenSubDiv modifier applied.-The OBJ contains the base mesh only. No subdivisions applied.-The STL file is the subdivided hi-res geometry only.- 3D Print ready- Motion Graphics ready
-
Math Object 0024 3D Model
-The 3dsmax scene file contains the base mesh with OpenSubDiv modifier applied.-The OBJ contains the base mesh only. No subdivisions applied.-The STL file is the subdivided hi-res geometry only.
-
Math Object 0025 3D Model
-The 3dsmax scene file contains the base mesh with OpenSubDiv modifier applied.-The OBJ contains the base mesh only. No subdivisions applied.-The STL file is the subdivided hi-res geometry only.
-
Math Object 0018 3D Model
-The 3dsmax scene file contains the base mesh with OpenSubDiv modifier applied.-The OBJ contains the base mesh only. No subdivisions applied.-The STL file is the subdivided hi-res geometry only.
-
Math Object 0019 3D Model
-The 3dsmax scene file contains the base mesh with OpenSubDiv modifier applied.-The OBJ contains the base mesh only. No subdivisions applied.-The STL file is the subdivided hi-res geometry only.
-
Math Object 0010 3D Model
-The 3dsmax scene file contains the base mesh with OpenSubDiv modifier applied.-The OBJ contains the base mesh only. No subdivisions applied.-The STL file is the subdivided hi-res geometry only.
-
Math Object 001 3D Model
-The 3dsmax scene file contains the base mesh with OpenSubDiv modifier.-The OBJ contains the base mesh only. No subdivisions applied.-The STL file is the subdivided geometry only.
-
Mashup-Yoda 3D Print Model
Mashup-Yoda is the second design in my series of mashups – a creative combination of 2 designs on Thingiverse:
-
Coral lampshade 3D Print Model
A lampshade that looks lika a coral.
Update: A version without holes. -
Voronoi Beverage Coasters 3D Print Model
These are 4 fun coasters made with a random voronoi pattern. They are different from each other, as a different ‘seed’ was used for the random pattern on each one.
