3DHunt.co

Tag: USB-C

  • Case for Aukey USB-C Adapter 3D Print Model

    Case for Aukey USB-C Adapter 3D Print Model

    Summary
    Case for Aukey USB-C Adapter
    This case holds 2 Aukey USB-C to USB 3.0 (USB-A) adapters. It is designed to have a 6 x 3 mm magnet embedded in each the box and the lid to hold them together.
    To embed the magnets, I used GCode Simulator to find the height of the first layer above the hole for the magnet, then I inserted command M600 to pause the printer. When I added the magnet it wanted to lift out of place and stick to the gantry of my printer when I resumed printing, so I glued it in place with a drop of super glue before resuming. When placing the magnets, be sure to orient them so that the lid and box are attracted to each other when assembled.
    Links
    Aukey USB-C to USB 3.0 (USB-A) Adapter6 x 3 mm magnetGCode Simulator
    Print Settings
    Printer:
    Monoprice Select Mini
    Rafts:
    No
    Supports:
    No
    Resolution:
    0.0875
    Infill:
    20%
    Notes:
    The two boxes pictured were made with Hatchbox Wood PLA and Hatchbox Blue PLA.

  • Apple MacBook USB-C Docking Station 3D Print Model

    Apple MacBook USB-C Docking Station 3D Print Model

    Summary
    I got this great little USB C Hub, however when ever I moved the computer the hub would wiggle and eventually disconnect.
    This dock solves this and props up the computer a bit more making it more natural to type.
    If your printer is too small to print the strip in a single piece, you can use the connector to join the two parts.
    I used NinjaFlex at 50% infill and rubber ciment to glue them together.