3DHunt.co

Tag: tip

  • Felt tip pen 3D Model

    Felt tip pen 3D Model

    Felt tip pen3D model of highlighter penTurboSmooth modifier can be used to increase mesh resolution if necessaryPreview rendered with V-RayFile Formats: 3ds Max 2012, FBXReal-world scale, units – millimetersLighting is not included

  • Skull 3D Model

    Skull 3D Model

    Skull-driptip for vape

  • Cobra Drip Tip 510 3D Print Model

    Cobra Drip Tip 510 3D Print Model

    Summary
    I print it in 0,1 mm Layerhight in ABS

  • Bandage Scissors 3D Model

    Bandage Scissors 3D Model

    BANDAGE SCISSORS=================================- Modeled in Blender.- Preview image rendered using cycles.- All scene are included in .blend files.- Poly count are before sub division- Great for close up render.- All parts and materials are logically named.OTHER FORMATS=================- 3ds MAX- COLLADA (.dae)- Autodesk FBX- OBJ

  • Ball Tip 3D Model

    Ball Tip 3D Model

    Rating: 0.00, Vote(s): 0

  • Ball Tip Free 3D Model

    Ball Tip Free 3D Model

    Rating: 0.00, Vote(s): 0

  • Solder Station Tip Mount (Zeny 862D+) 3D Print Model

    Solder Station Tip Mount (Zeny 862D+) 3D Print Model

    Summary
    A remix of infectedfpv26’s soldering station mount. I’ve resized everything to fit on the ZENY 862D+ station.

  • Pool Rack 3D Model

    Pool Rack 3D Model

    Billiard Cue Rack pool stick ball equipment chalk cuetip tip wood wooden rod teak hobby hobbie sport fun stillage realistic shelving

  • Rusty tip- 3D Model

    Rusty tip- 3D Model

    This model was created in the program 3Ds max 2018, suitable for printing.Данная модель была создана в программе 3Ds макс 2018, пригодная для печати.

  • Toothless 3D Print Model

    Toothless 3D Print Model

    Requested by Robert S.

  • M.Terk Drip Tip 3D Print Model

    M.Terk Drip Tip 3D Print Model

    Summary
    I designed this drip tip to work with my M.Terk RDA on a Vaping American Made Rig Mod v3. It fits loosely without the oring, comfortably snug with an oring. The internal shape is tapered/conical to add a bit of restriction to the flow of air (strictly preference).
    A single oring is used to help keep it tight/snug. What size works best may vary depending on print quality.
    Print Settings
    Printer Brand:
    Prusa Printer:
    Prusa Mk2 Rafts:
    No Supports:
    No Resolution:
    0.15 mm Infill:
    20% Notes:
    Insert Dimensions: 11mm DIA x 6mm
    Mouthpiece Dimensions: 14mm DIA x 12mm
    Oring Dimensions: 7/16″ DIA x 1/16″ thickness (~11mm DIA x ~1.7mm thickness)
    Print orientation was upside-down (mouthpiece on build plate, insert to the sky). I printed with no supports, but do as you like/require.
    Total print time: ~24 minutes
    Nozzle/Extruder Temperature: 210°C
    Bed Temperature: 55°C
    Material: PLA (Any material would likely work. Print settings may need to be adjusted accordingly)
    Post-Printing
    Finishing
    Flashing trimmed from the build plate layer. Light sanding with 220 grit sandpaper to make a smoother “friendly” edge on the mouthpiece opening.

  • Tent Support Tip 3D Print Model

    Tent Support Tip 3D Print Model

    Summary
    Why spend $5.95 (US) on a replacement part when you can spend $$$ on a 3D printer, filament, replacement parts, etc.? Because you can!
    This is my first creation, start to finish. It is a replacement tent support tip for my Coleman popup tent trailer. The original tip had sheared off. I had to drill it out in chunks, because of the tight fit.
    I made this in OpenSCAD, printed a hollow .1mm thick test on quick print settings (Cura 15.04, Hictop 3DP-17), and adjusted the model in OpenSCAD once (test print was the same diameter as the outside of the pole – forgot to subtract wall thickness). This is the final version.
    I printed it in high quality mode with 45% infill for strength, using PLA (I haven’t gotten any ABS yet). Took a bit of sanding to get it to fit in the support pipe, but the tip turned out perfect. And it only took 1.5 hours to do the final print, which I installed just before the rains hit (otherwise the roof would collect water and leak).
    Print Settings
    Printer:
    Hictop 3DP-17 Rafts:
    No Supports:
    No Resolution:
    High Infill:
    45%

  • Tweezer 3D Model

    Tweezer 3D Model

    This is a model of a tweezer.
    Originally created with 3d max 2014
    Rendered for preview in Marmoset, Unity and Vray
    This model is suitable for use as for real time engines and for render
    ——————————————————————————
    You can use subdividing(Turbosmooth), the geometry is support it.
    Geometry was checked for bugs, overlapping faces and vertices and etc.
    ——————————————————————————
    Textures are 4K
    For Unity:
    – Albedo
    – Normal
    – Metalness
    – SpecularSmoothness
    For UE4:
    – BaseColor
    – Normal
    – Occlusion_Roughness_Metallic (in channels RGB)
    For vray:
    – Diffuse
    – RGlossiness
    – Normal
    – Reflection
    ——————————————————————————
    Polys: 2344
    Tris: 4028
    Verts: 2196
    ——————————————————————————
    File formats:
    – 3d Max 2014 (vray 2.40)
    – 3d Max 2011
    – 3d Max 2017
    – UnityPackage
    – OBJ
    – FBX
    – 3DS
    ——————————————————————————
    If you have a question or problem with my models, let me know. I’ll fix it.
    Thank You!