The Sukhoi Su-25K was the export variant of the Su-25.Parts are separable as seen.
Tag: sukhoi
-
Mig 144 3D Model
The new MiG Multirole Front-Line Fighter [MFI – Mnogofounksionalni Frontovoi Istrebiel ] was unveiled publicly on 12 January 1999. The project has been under development since 1986, is variously designated the 1.42, the 1.44, I-42 and I-44 – the ‘MiG-35’ and ‘MiG-39’ designations are informally applied by some observers. This multi-functional front-line fifth-generation fighter was developed by the MIG [Mikoyan & Gurevich] aviation scientific and production complex of the MAPO military-industrial corporation. The first prototype was delivered early in 1994, and in December 1884 taxi-tests were conducted following which further work was suspended due to a shortage of funds. The 35-ton fighter features a single under-fuselage air intake with two AL41F engines of 20 tons thrust each, and a top speed of over 2,500 km/h. The twin-tail ‘duck’ planform features an all-moving canard-type foreplane with a wingspan of about 15 meters and a length of about 20 meters.
-
Su-33 3D Model
Sukhoi Su-33 NATO codename: Flanker Carrier-borne Multi-Role Fighter.The Sukhoi Su-33 is a navalized version of the company”s Su-27 originally designed to operate from the Soviet Union”s first class of large aircraft carriers.
-
Su-34 v2 3D Model
The Su-34 (also known as Su-27IB) fighter bomber has been developed by the Sukhoi Design Bureau Joint Stock Company in Moscow and the Novosibirsk Aircraft Production Association at Novosibirsk in Russia. The Russian Air Force has ordered an initial 18 Su-34 aircraft, with a total requirement for up to 200 aircraft. The first two production aircraft were delivered to the Russian Air Force in December 2006. The Su-34 is expected to enter operational service in 2010.
-
Su-47 3D Model
A very detailed Sukhoi SU-47 Berkut experimental forward swept wing fighter. Includes cockpit, landing gear, separate control surfaces and auxilary intake doors.
-
Su-37 3D Model
The Su-37 is a super-maneuverable thrust vectoring fighter derived from an Su-35 prototype. The Su-37 represents a new level of capability compared with the Su-27 and Su-35.
-
Sukhoi PAK FA T-50 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
Sukhoi Superjet 100 low-poly 3D Model
Sukhoi Superjet 100 (Russian Sukhoi Superjet 100) is a Russian short-haul passenger aircraft developed by the Sukhoi Civil Aircraft Company with the participation of a number of foreign companies (see below). The certification name for the aircraft family is RRJ (Russian Regional Jet). The designation ICAO – SU95 (SU95).
-
Sukhoi Su-35 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
Sukhoi Su-57 Pak-Fa Splinter camo blackpanthers 3D Model
The Sukhoi Su-57 is the designation intended for a stealth, single-seat, twin-engine jet multirole fighter aircraft designed for air superiority and attack operations. The aircraft is called the PAK-FA , a fifth-generation fighter programme of the Russian Air Force. Sukhoi’s internal name for the aircraft is T-50. The Su-57 will be the first aircraft in Russian military service to use stealth technology. The fighter is planned to have supercruise, stealth, supermaneuverability and advanced avionics to overcome the prior generation fighter aircraft as well as ground and maritime defences. Around 150 to 200 aircraft orders from the Russian Air Force and 200 from the Indian Air Force (IAF) are expected. Production will commence in 2015 after five to six flight trials. Around three flight trials were completed as of February 2010.
-
Sukhoi Su-34 3D Model
Used PBR materials 2048×2048.The Sukhoi Su-34 (Russian: Сухой Су-34; NATO reporting name: Fullback) is a Russian twin-engine, twin-seat, all-weather supersonic medium-range fighter-bomber/strike aircraft. It first flew in 1990 and entered service in 2014 with the Russian Air Force.Based on the Sukhoi Su-27 Flanker air superiority fighter, the Su-34 has an armored cockpit for side-by-side seating of its two-man crew. The Su-34 is designed primarily for tactical deployment against ground and naval targets (tactical bombing/attack/interdiction roles, including against small and mobile targets) on solo and group missions in daytime and at night, under favourable and adverse weather conditions and in a hostile environment with counter-fire and EW counter-measures deployed, as well as for aerial reconnaissance.
-
Sukhoi Su-27 3D Model
The Sukhoi Su-27 (Russian: Сухой Су-27; NATO reporting name: Flanker; nicknamed “Sushka” in USSR) is a twin-engine supermaneuverable fighter aircraft designed by Sukhoi. It was intended as a direct competitor for the large United States fourth-generation fighters such as the Grumman F-14 Tomcat and F-15 Eagle, with 3,530-kilometre (1,910 nmi) range, heavy aircraft ordnance, sophisticated avionics and high maneuverability. The Su-27 was designed for air superiority missions, and subsequent variants are able to perform almost all aerial warfare operations. It was designed with the Mikoyan MiG-29 as its complement.The Su-27 entered service with the Soviet Air Forces in 1985. The primary role was long range air defence against American SAC B-1B and B-52G/H bombers, protecting the Soviet coast from aircraft carriers and flying long range fighter escort for Soviet heavy bombers such as the Tu-95 “Bear”, Tu-22M “Backfire” and Tu-160 “Blackjack”.There are several related developments of the Su-27 design. The Su-30 is a two-seat, dual-role fighter for all-weather, air-to-air and air-to-surface deep interdiction missions. The Su-33 ‘Flanker-D’ is a naval fleet defense interceptor for use on aircraft carriers. Further versions include the side-by-side two-seat Su-34 ‘Fullback’ strike/fighter-bomber variant, and the Su-35 ‘Flanker-E’ improved air superiority and multi-role fighter. The Shenyang J-11 is a Chinese licence-built version of the Su-27.
-
Sukhoi Su-34 3D Model
The 3D model was created on real base. It’s created accurately, in real units of measurement, qualitatively and maximally close to the original.Model formats:- *.max (3ds Max 2008 scanline)- *.max (3ds Max 2008 vray)- *.fbx (Multi Format)- *.obj (Multi Format)- *.3ds (Multi Format)- *.mb (Maya 8.5)- *.lwo (Lightwave 6)- *.c4d (Cinema 4D 11)* renders Are made in 3ds Max 2008 using vray 1.5 (studio environment is not included in the set)If you need any other formats we are more than happy to make them for you.The model is provided combined, all main parts are presented as separate parts therefore materials of objects are easy to be modified or removed and standard parts are easy to be replaced. If you experience difficulties with separating standard parts we are more than happy to give you qualified assistance.We greatly appreciate you choosing our 3D models and hope they will be of use.We look forward to continuously dealing with you.Sincerely Yours,Hum3D Team
-
sukhoi PAKFA 3D model 3D Model
a detail sukhoi pakfa, also called t50 .russian 5th generation stealth fighter made by sukhoi design bereau, the model is rigged already but only in the native blend file (all the moveable part flap, leading edges, stabilizer, cockpit, canopy,missile bay, nozzle, and the landing gear for sure , the other format also provided and should be easy to rig, it comes with 3 texture:fuselage 4096X4096secondary part 4096x4096cockpit 2048x2048also don’t forget to check my other product. thanks for coming
