This is a modern gun model which is modeled using 3Dmax 2014 version. It consists of a clean and neat mesh.I also have unwrapped and it in 3d coat. And rendered in marmoset toolbag. Here i have attached the 3dmax and obj files. Unwrapped files can be given if needed.
Tag: submachinegun
-
A-91 Bullpup 3D Model
Used 2 k PBR textures.The A-91 bullpup assault rifle (also known as A-91M) was developed during the 1990s by KBP Instrument Design Bureau in Tula, as an offspring of the A-91 family of compact assault rifles described in the 9A-91 article. While the A-91 retains the basic gas-operated, rotating bolt action and a trigger unit design from 9A-91, it features a bullpup polymer housing, with an integral 40 mm single-shot grenade launcher mounted under the barrel. The earliest prototypes of the A-91 bullpup were fitted with the grenade launcher above the barrel, and with a front vertical foregrip; current models are fitted with the underbarrel launcher, which also serves as a forearm. The A-91 features a forward ejection system, initially developed in Tula by designers like Afanasiev during the early 1960s. In this system, the ejection port is located above the pistol grip, and points forward. Extracted cases are fed from bolt head through the short ejection tube to the ejection port, and fall out of the gun well clear of the shooter’s face, even when firing from the left shoulder. As for now, the A-91 is made in small number and, probably, is used by some elite law enforcement units in Russia; it is also offered for export and domestic military and police sales.
-
OTs-02 Kiparis 3D Model
Hellow!In this project i use 2 k PBR textures.Parts:1)Barrel2)Butt3)Mag4)Handle5)Switcher6)BodyThe OTs-02 Kiparis (ОЦ-02 Кипарис, Russian for “cypress”) submachine gun was designed by the TsKIB SOO design bureau of Tula during the early 1970s but was not introduced into service until 1991. It is primarily intended for internal security and police units, it was adopted by the Russian police and MVD (Internal Affairs Ministry).The OTs-02 is a blowback-operated weapon of a conventional design chambered in 9×18mm Makarov.The receiver is made from pressed steel with a synthetic plastic pistol grip. It feeds from stamped steel detachable straight box magazines, inserted into a well in front of the trigger guard with either a 20 or 30-round cartridge capacity.The weapon has a rudimentary steel skeletonized stock which folds up and over the receiver when folded, in such a manner that the simple base plate outline extends downwards to either side of the muzzle. The Kiparis is supplied with a proprietary sound suppressor with a service life of approximately 6,000 rounds, the same service life as the barrel.The OTs-02 Kiparis can also accommodate a red dot sight or a tactical laser pointer which clips on forward of the magazine housing in such a way that the bottom of the laser aiming device can act as a forward grip during aiming.
-
HecklerKoch Pack 3D Model
I present you my packconsisting of 4 high-quality low-poly models submachineguns Heckler & Koch :H&K XM-8 Compact,H&K 416,H&K M-7 A-1 and H&K M-7 Navy Seals.Thank you for watching.
-
Heckler Koch UMP-45 3D Model
The UMP (Universale Maschinenpistole, German for “Universal Submachine Gun”) is a submachine gun developed and manufactured by Heckler & Koch. The UMP has been adopted by various agencies such as the U.S. Customs and Border Protection. Heckler & Koch developed the UMP as a lighter and cheaper successor to the MP5, though both remain in production.
-
MAC-10 Free 3D Model
*Disclaimer: It comes in OBJ, 3DS, Blend, MLT, Not just .Blend)
This is a simple, game ready model of a Mac 10.
The clip is it’s own individual piece that can be removed
it’s got 2 bullets in the clip for added realism, Can be removed as well
The model has basic materials you can remove and UV map yourself.
(Materials: Blender CYCLES) -
MAC-10 3D Model
*Disclaimer: It comes in OBJ, 3DS, Blend, MLT, Not just .Blend)
This is a simple, game ready model of a Mac 10.
The clip is it’s own individual piece that can be removed
it’s got 2 bullets in the clip for added realism, Can be removed as well
The model has basic materials you can remove and UV map yourself.
(Materials: Blender CYCLES)
