Summary
By request for Nerf Moders Welcome
None of this is my own design but I did combine different things and modify them to make them all work as a kit. This is all the parts from the “Big Boy Stryfe” minus the Foam Blast parts which can be found here:
Stryfe Wire Channel https://www.thingiverse.com/thing:2422841
FoamBlast Nerf Stryfe Magazine/Clip Release https://www.thingiverse.com/thing:2479594
Nerf Stryfe Rev Trigger (Bobololo style) https://www.thingiverse.com/thing:2362063
You will need additional parts such as motors, wires, switches, m2 screws, m4 screws and such.
Print Settings
Printer:
Monoprice Select Mini V2 Rafts:
No Supports:
Yes Resolution:
Varies Infill:
Varies Notes:
Battery Door I print at 20% infill and 0.2mm resolution.
Butt Cap I print at 20% infill and 0.1mm resolution.
Flared Mag Well I print at 20% infill and 0.1mm resolution.
Motor Cover I print at 20% infill and 0.2mm resolution.
Pusher I print at 100% infill and 0.1mm resolution.
Stryfe Foregrip I print at 20% infill and 0.1mm resolution.
Strfe OFP Cage I print at 20% infill and 0.2mm resolution.
Stryfe Trigger (Long or Short) I print at 30% infill and 0.1mm resolution.
W Piece I print at 20% infill and 0.1mm resolution.
Tag: Stryfe
-
Big Boy Stryfe Kit 3D Print Model
-
Nerf Stryfe Top Gun Rail 3D Print Model
Summary
“top run rail Part B.STL” Needs 2x M3 8mm Countersunk Screws you can Tap the holes with M3 Taps but i would suggest you don’t just screw them into the plastic.
“top run rail Part A.STL” Needs 2x M3 8mm Countersunk Screws you can Tap the holes with M3 Taps but i would suggest you don’t just screw them into the plastic.
Both parts can be bolted together with one 15mm M3 countersunk Screw.
This is designed to fit the Worker “Front Tube Adapter for Stryfe” Picture shown… -
Nerf Stryfe Microswitch Trigger
Summary
Yo,
I built the AutoStryfe mod kit by kitsune109(/thing:2245550) and wanted to have a nice pistol trigger and some more space for the microswitch. So I took the Nerf Stryfe Trigger V1 by bkbstar21, modded it a little bit and glued the P36 Airsoft Trigger by Big-E to it. (thanks to you guys!)
This trigger will only work if you put in a microswitch in a Nerf Stryfe!
cheers
Print Settings
Printer Brand:
Prusa Printer:
Prusa Clone Rafts:
No Supports:
Yes Resolution:
0.2 Infill:
100 Notes:
For me the print fitted out of the printer.
No sanding needed.
